How to connect my printer, my lap top and my WiFi network

Similar Questions

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

  I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• How to connect a printer wireless to my XP laptop, the wizard does not allow wireless connections

  I have a Brother MFC-5895CW printer connected to my BT home hub and use it with success from other laptops with windows 7 of Mac operating systems.

  However, I am struggling to connect my XP Edition family Lap top.

  When I try to "add a printer" I don't get the option to install plug-and-play printers and therefore cannot find the printer that is already installed on my network wireless.

  Can someone please help.

  Thank you

  Paul

  Hello Paul,

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

  Here are some steps you can try:

  Method 1:

  Run the fixit of the printer and check:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:

  Try to download the driver from the following link and check:

  See complete software & driver Package or Add Printer Driver Wizard (Microsoft WHQL certified*) from the following link:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=mfc5895cw_us_eu&dlid=&flang=English&OS=7&type2=-1

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For further reference:

  To connect to a printer on a network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• How to connect a printer wireless to my laptop

  I have a printer HP Officejet wireless 6500 E709n Series and I'd like to connect wirelessly to my Acer Aspire 5734Z lap top. Please notify.

  The wireless printer is already connected to your wireless home network?

  If so do you have installed the software from the manufacturer of the printer wireless on your computer Win 8.

  For example...

  When I installed my camera HP J4680 AiO (print/fax/scan) on my Windows 7 computer, I did these steps...

  1. Creates an ad hoc connection between the J4680 and my laptop Win 7.
  2. Configured the J4680 manually with my network SSID and the encryption type and encryption key. I did steps 1 and 2 because my random 63 character ASCII encryption key contains characters that are not available in the network control panel on the J4680 wireless. If you use a key encryption without special characters, you should be able to configure just the network settings from the printers Panel Wireless.
  3. The provided HP software, including drivers on my laptop Win 7 installed. The HP software went out and found the J4680 on my network.

  The steps should be similar for your device HP OfficeJet 6500 E709n, IE. Get it on the first wireless network and then install the HP software on your machine, Windows 8.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

  More help from HP...

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

• How to connect a printer to my Satellite C50 - B - 14 d

  Hello

  As a novice at computing, I need help to connect to my printer. I have a printer Canon Pixma MG3500 which has a blue light, telling me that it is wireless, however, when you try to add a printer, he tells me to no devices are found. How to connect to the printer? I have a disc that came with the printer, but this model doesn't have a disc drive

  Originally posted by MarkWhittaker
  

  I have a disc that came with the printer, but this model doesn't have a disc drive

  When you buy the new printer you will get the installation with driver disc and some applications that you can use for editing and photo software configuration. Install this package and later, when you want to print some documents checks the list of all available devices. Choose your printer and I hope that you will be able to print your documents.

  Of course, WLAN must be configured on your printer.

  I have too many WIFI printer and the whole Setup was very easy and very simple to do.

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• HP Chromebook 14: How to connect a printer to my hp chromebook 14 dell 305v?

  I'm trying to connect my HP Chromebook 14 to my Dell 305v printer wireless.  Any suggestions?  If this is not the case, what is the best printer to buy so I can print?  No one at Staples had suggestions because they were not famiiar with chromebooks.

  Hello

  Welcome to the HP support forums. You need to configure Cloud print for your Chromebook and your printer Dell MUST handle this. Please see the following Dell link and follow the instructions to set up:

  http://www.Dell.com/learn/us/en/04/campaigns/Google-cloud-print

  Kind regards.

• How re - connect my printer wireless since the evolution to a router from another server?

  I went from attuverse at time warner, and now my printer is not working.

  Hi Dorothyt,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code when connecting wireless printer?

  2. What is the brand and model of the printer?

  You can follow these articles that talks about the installation of printer on the Windows 7 computer:

  Install a printer

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

   

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• How to connect my Canon MP 495 to a new wireless network?

  I have a Canon MP 495, which worked without any problems. We moved into a new House and I have a new wireless network; I can't the printer reconnected to the new wireless network. How can I do this? The drivers are already installed on the computer.

  Hi 1cor29,

  Since you have changed the locations, you will need to reinstall the drivers on your computer to connect the printer to your network.  We reinstall the printer using the latest drivers on the Canon USA site.  Before reinstalling drivers, you want to make sure that the LAN setting wireless on the printer is enabled. To do this, press the Maintenance key (it looks like a pair of pliers and screwdriver) until the symbol that looks like 'G' appears on the LCD screen, then press the button to activate the wireless LAN.

  Once the wire has been enabled, please click here to access the DRIVERS AND SOFTWARE for the PIXMA MP495 page.  Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the drivers of MP file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once the file is downloaded, please double-click it to reinstall the printer.  Once the drivers have been resettled, you should be able to print.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• How to connect my Samsung wave with my laptop via wifi?

  original title: wifi connection

  HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

  Hello

  I suggest you follow the links below and the Coachman

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You try to connect the phone directly on the system or through a router?

  You will not be able to connect the cellphone to the PC directly,

  See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

• Several times (not all the time) when I disconnect my lap top and then plug it back, the computer crashes and I have to restart manually.

  I called Dell a few weeks ago.  They had me remove the battery, press the power button 15 X and then restart.  They did a scan of material and said that everything was going well.  I ran once again virus scan software, and there is no virus.  I deleted all temporary files.  They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only.  Do I have other options as to how can I fix?  This is a NEW computer that I just received in August!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
  drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• DeskJet 3050 j610: unable to connect my printer HP Deskjet 3050 J610 to my network wireless at home

  I recently change my router a Netgear to a Lynksys wireless. I can't go to my printer. I tried to use the printer setup wizard thing (temporarily connect a USB key), which is on the printer stop blue wireless light flashes, but still couldn't print. When I print a report out of print it directly, the "Configuration Summary" shows the outskirts name (SSID) and Netgear84 (my old router). I can't get printing recognize on the new router/network.  Help, please

  Hey @dbot,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have some problems with the printer all-in-one Deskjet 3050 connection to your new router. I can help you with that.

  First of all, we will restore the default values of network on the printer. To do:

  Remove the USB cable to the back of the printer.

  On the printer, press the wireless icon that looks like a radio tower.

  Click on the white button next to settings.
  Click on the white button next to default settings.

  If there is a screen asking you to confirm, then press the white button next Yes. Blue wireless light should turn off.

  Now on your PC we will uninstall all software associated with the printer.

  Download and install the latest drivers by clicking on this link.

  Once installation is complete, you should have the printer connected to your wireless network.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How to crop without black at the top and bottom

  Hello

  I try to crop a video. I go to Effects > video effects > transform > crop and under the effects of the controls, I put 20.0% on top and 12% on the bottom because that's how I want the cropped video. When I export the video it is always black on the top and bottom. How crop and export this video without that there is black at the top and bottom (and also to reduce the height of the video, take a part from the top and down)? Thank you!

  

  

• Is there a simple example, I can see how to connect to a database using actionscript and Flash 8? (not with components)

  I've looked everywhere for a simple example "hello world", on how to connect to a database, pass a parameter and returns a dataset object. I'd like one that uses no components. (Actionscript only). Who uses ColdFusion 7.x and Flash 8. Can someone point me to one?

  Thanks Craig, I noticed the example, but it was meant for Flash MX, and Flash 8 documentation, the NetServices is now obsolete. Anyway, I posted my question on another site and some provided me with a simple example. Here is the url if anyone is interested... sample