How to: connect my printer wireless

Original title: worse instead of better

have a canon mg5220 and was trying to make wireless work could not do that so I reconnected it to use it with the cable and now it does not work that way either. This is printer offline, but I know that all sons andf cables are connect.

Hello

I suggest you to follow the steps in this link and check if it fhelps:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cannot-print-to-networked-printer-after-Windows-7/d10c6104-Cdc6-4701-8F09-b94d5315bb66

It will be useful.

Tags: Windows

Similar Questions

  • How to connect the printer wireless hp with the computer?

    * - Original title - the printer printing

    How to connect the printer wireless hp with the computer?

    HP all what you need to be able to complete the task... See here...

    http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

  • How to connect a printer wireless to my laptop

    I have a printer HP Officejet wireless 6500 E709n Series and I'd like to connect wirelessly to my Acer Aspire 5734Z lap top. Please notify.

    The wireless printer is already connected to your wireless home network?

    If so do you have installed the software from the manufacturer of the printer wireless on your computer Win 8.

    For example...

    When I installed my camera HP J4680 AiO (print/fax/scan) on my Windows 7 computer, I did these steps...

    1. Creates an ad hoc connection between the J4680 and my laptop Win 7.
    2. Configured the J4680 manually with my network SSID and the encryption type and encryption key. I did steps 1 and 2 because my random 63 character ASCII encryption key contains characters that are not available in the network control panel on the J4680 wireless. If you use a key encryption without special characters, you should be able to configure just the network settings from the printers Panel Wireless.
    3. The provided HP software, including drivers on my laptop Win 7 installed. The HP software went out and found the J4680 on my network.

    The steps should be similar for your device HP OfficeJet 6500 E709n, IE. Get it on the first wireless network and then install the HP software on your machine, Windows 8.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

    More help from HP...

    http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

  • How to connect a printer wireless to my XP laptop, the wizard does not allow wireless connections

    I have a Brother MFC-5895CW printer connected to my BT home hub and use it with success from other laptops with windows 7 of Mac operating systems.

    However, I am struggling to connect my XP Edition family Lap top.

    When I try to "add a printer" I don't get the option to install plug-and-play printers and therefore cannot find the printer that is already installed on my network wireless.

    Can someone please help.

    Thank you

    Paul

    Hello Paul,

    Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

    Here are some steps you can try:

    Method 1:

    Run the fixit of the printer and check:

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/en-us

    Method 2:

    Try to download the driver from the following link and check:

    See complete software & driver Package or Add Printer Driver Wizard (Microsoft WHQL certified*) from the following link:

    http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=mfc5895cw_us_eu&dlid=&flang=English&OS=7&type2=-1

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    For further reference:

    To connect to a printer on a network

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

  • How re - connect my printer wireless since the evolution to a router from another server?

    I went from attuverse at time warner, and now my printer is not working.

    Hi Dorothyt,

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. you receive an error message or error code when connecting wireless printer?

    2. What is the brand and model of the printer?

    You can follow these articles that talks about the installation of printer on the Windows 7 computer:

    Install a printer

    http://Windows.Microsoft.com/en-in/Windows7/install-a-printer

     

    Add a Bluetooth device or other wireless or network device: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

     

    Connect to Bluetooth and other wireless or network devices

    http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

    How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

    Thank you very much for your help, if necessary.

    Quite a few questions, send, but I will do what I can to answer them.

    I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

    In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

    Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

    You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

    I hope this information is useful!

  • using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Hello

    I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

  • How to configure a printer wireless connected to Time Capsule?

    I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

    What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

    I hope someone here could help me, please. Thank you!

    I have an Epson printer, so some of my experiences may or may not apply.

    I also have a time Capsule, and my printer and Time Capsule are far apart.

    My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

    When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

  • How to connect a USB-wireless printer to a wireless network without PC

    Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

    The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

    Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

    Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

    Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

    When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

    Enter the network password if necessary and click Next.

    A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

    After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

    Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

    I hope this helps.

  • How to connect a printer to my Satellite C50 - B - 14 d

    Hello

    As a novice at computing, I need help to connect to my printer. I have a printer Canon Pixma MG3500 which has a blue light, telling me that it is wireless, however, when you try to add a printer, he tells me to no devices are found. How to connect to the printer? I have a disc that came with the printer, but this model doesn't have a disc drive

    Originally posted by MarkWhittaker
    I have a disc that came with the printer, but this model doesn't have a disc drive

    When you buy the new printer you will get the installation with driver disc and some applications that you can use for editing and photo software configuration. Install this package and later, when you want to print some documents checks the list of all available devices. Choose your printer and I hope that you will be able to print your documents.

    Of course, WLAN must be configured on your printer.

    I have too many WIFI printer and the whole Setup was very easy and very simple to do.

  • How to make a printer wireless?

    I have laptop with wifi and has a wireless router, a HP color Laserjet 1515n.  now, I want to put the printer in the other room away from the router and the laptop.  How can I make a printer wireless (wireless connects to the router)?  I'll buy a camera?  What friendly device?  Thank you!

    I understand, thank you very much!

  • Is it possible to have a connection to printer wireless and wireless Internet at the same time with Windows Vista?

    I'm trying to connect my wireless printer while maintaining my wireless internet connection. Is this possible?

    Hello ScottWatt,

    Thanks for your post.  Yes, however, there is a specific way to go about it.  Since you have wireless internet, you probably have a wireless router.  In this case, you must change your printer settings to connect to the router. You can find information on how to do this either through your manual, or online from the manufacturer's Web site.

    Then you would connect your computer to the Wireless internet connection as well.

    From there, both your computer and the printer would be on the same network, just install the printer on a network and you can surf the web and print wireless.

    See you soon

  • connect a printer wireless - need 2.4 ghz band of timecapsule

    Hello

    I am trying to print via WiFi wireless and my new printer says that it cannot connect to a 5 GHz signal.  It can only connect via 2.4 ghz.  Can configure my TimeCapsule for dual band?  While I can print wireless?

    I appreciate any help!  Thank you! Gracias!

    I am running the following:

    MacBook Pro (to 2011)

    El Capitan OSX 10.11

    TimeCapsule (to 2009)

    Printer: HP ENVY 4520

    Can configure my TimeCapsule for dual band?

    A Capsule of 2009 may or may not be a simultaneous dual-band model.  To find out what exactly what you might have, please look on the bottom of the time Capsule to locate the model number. Probably, it is integrated in the base of carpet of MOSS.

    The model number starts with an 'A' follow-up of four digits. Post back with number and we will continue.

  • How to set up printing wireless Photosmart C8180 All-in-one printer.

    My os is Windows 7 64 bit.

    I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

    The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

    Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

    1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
    2. click on > start > Control Panel > printers.
    3. click on add a printer
    4. Select local printer
    5. Select create a new port and select Standard TCP/IP Port, and click Next.
    6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
    7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
    If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
    8. If prompted, use the driver that is currently installed.
    9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
    10. we may ask you to share the printer. Choose No.
    11. the printing area of Test Page is displayed. Go ahead and print it out.
    12. click on finish.

  • I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

    I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

    Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

    If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

    Have a look here.

    Software & Driver Downloads
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

    It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

    If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

    For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

Maybe you are looking for