How to connect or activate my wifi on my laptop Windows 7

Similar Questions

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• How to connect to workgrup the two Windows7, 8 or Windows XP

  I have a wireless workgrup with Windows XP, but some phones are windows7 or Windows8. Windows 7 or Windows 8 are not connected to the network group work how to connect the working group the two Windows7, 8 or Windows XP?

  Hi Cathy

   

  Thanks for posting your question in the Microsoft Community.

  I understand you want to know how to connect groups of work between Windows 7, Windows 8, or Windows XP. Correct me if I'm wrong.

  I will try to help you in the matter of fixing.

   

   

  Please follow the steps described in the links below and check the issue.

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Join or create a workgroup:

  http://Windows.Microsoft.com/en-us/Windows-8/join-or-create-a-workgroup

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• myRIO LabView Network Configuration, can not [SAVE] connection to activate the WIFI running.

  Recently acquired a new myRIO of NOR.  Now implementing the WIFI option on the Configuration Page of network OR.

  Following the instructions, connected to the router, getting 5 green bars. and a big check.

  The instructions ask to press the [SAVE] button, but save it button is not active, only two

  other buttons are active, the [Certificate Management] button and the [refresh] button.

  I clicked the [refresh] button, but nothing happened.  I don't know what to do with the

  Button [certificate Management], given that the instructions do not attack it.

  Thus, myRIO State indicates that it is connected to the router via the USB cable and not wireless.

  If the USB cable is disconnected myRIO, a pop up message saying "Connection to target Lost!

  Please contact me on my dilemma.

  I wasn't aware of it, but the configuration myRio

  has saved it's self automatically and the

  function of this module was complete.

  I'm now able to operate myRIO wireless.

  4j1a

• How can I activate my WIFI on my laptop?

  I used my blue Fn key and press f3 which put my phone in airplane mode. After turning it back on my WIFI stopped working. How to run again

  Try pressing both keys (Fn & F3) to reactivate.

  Press Fn and then press F3

  Usually it's Fn & F2

• Problems connecting to a hotspot wifi using my laptop.

  Original title: why my laptop can not do wifi hotspot? I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt. Thank you for participating in my concern.

  I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt

  Hi bdsuliano,

  If you are facing problems connecting to the wireless network, try the steps in the following article.

  Windows wireless and wired network connection problems

  I hope this helps.

• How to connect automatically to a virtual private network in Windows 7 to start upward

  How will automatically connect to a VPN in Windows 7 start upward as as I would like to set up a VPN connection to connect to my exchange account to collect & sync without having to manual when I start my laptop.  Thank you

  If you need to connect to a virtual private network in windows startup and that you do not want to have the thrust of the user to connect or enter the password follow these steps:
  (1) on the VPN connection screen, select 'save this user name and password for the following users.
  (2) select the "anyone who uses this computer" radio button
  3) click 'Properties' on the screen of VPN connection
  (4) on the 'Options' tab, uncheck the box:
  -Display progress while connecting.
  ' Prompt name and password, certificate, etc. ".
  (5) in Windows Explorer, navigate to C:\Documents and Settings\All Users\Menu Démarrer\Programmes\Démarrage
  (6) open a new Windows Explorer and navigate to control network connections
  (7) drag the icon of your VPN connection to the startup folder. This will create a shortcut

  Now at Windows startup, the spear and connect silently.

• How to connect W XP to DSL with Dual Boot Windows 7 Pro & Windows XP Pro,

  Have Windows 7 Pro & Windows XP Pro installed in a dual-boot on a new computer configuration. Have Windows 7 Pro connected to the DSL through a wired connection to the Cisco router. How can I connect Windows XP to DSL, via wired or wireless?

  Hello

  Thanks for posting your query in Microsoft Community.

   

  I understand that you must also connect the Windows XP operating system to a network.

  Here are a few steps to do this, please follow.

  Step 1: Set up Windows XP DSL Connection: using the new network connection wizard.

  1. Click Start and follow the path: programs-> Accessories-> Communications.

  2. Select the New Connection Wizard , and then click Next.

  3. There are several options in the wizard. You set a Windows XP DSL connection, select the option above that says to connect to the internet and click Next.

  4. Select Setup my connection manually and click Next.

  5. Here, there are three options. The first is for the modem connection, so we must not select. If your DSL account is always enabled, select the third option and click Finish and see the next section on IP addresses. If your DSL account is a limited account, which requires the password, select the second option and click Next.

  6. Enter a name for this connection, and then click Next.

  7. In this screen, enter your DSL ID and the password that you got from the ISP. Click Finish.

  Hope this information is useful. Please update the status of this issue. Do not hesitate to contact us to get help with the Windows operating system. We are happy to help you.

  Thank you.

• How to connect without changing the DNS on the Client Windows 7 computer to the 2008 R2 domain controller?

  I have a Windows Server 2008 R2 Enterprise domain controller configuration and some Windows 7 computers. I use this for a home network for safety because we rent a part of the property and still have guests. The part being rented has 2 portable Windows 7 Professional that guests can use.

  I want to connect all computers to the domain controller without changing the DNS settings on them. How to get to do and please put detailed instructions?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to connect a HP722C via Netgear PS101 to a Windows 7 PC?

  When I try to set up the Netgear PS101, laptop computer Windows 7 does not.

  A desktop computer Windows 2000 recognizes the server.
  I also suspect that the drivers for the HP722C may not be compatible Win 7.

  Hi Benin,

  1. What do you mean by "Windows 2000 desktop does recognize the server"?
  2. are you connected to the domain?

  To set up a wireless router, I suggest you try the following steps.
  
  Method 1:
  I suggest you try the steps from the following link on how to configure the wireless router.

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Method 2: HP722C is not compatible with Windows 7, that's why I suggest to download and install drivers in compatibility mode enemy Windows vista.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Download drivers link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14537&locale=en_US&TaskID=135&prodSeriesId=25400&prodTypeId=18972

  Post us the results once you try the steps above.

• How to connect the display 27 Thunderbolt to other laptops like Dell, HP

  Hello

  I have monitor Apple Thunderbolt Display 27 ", I want to connect to the Dell laptop.

  Can someone help me to desire to adapter that works. I tried to connect using

  Mini DisplayPort to VGA

  but it does not work.

  Answer me by return, those who

  If the computer doesn't have a Thunderbolt port, it can use a Thunderbolt display.  There are no adapters, cables or converters that will help.

• How to connect a wireless and boardband on HP laptop wireless mouse

  Using XP on a laptop HP with mouse & keyboard wireless can not connect to wireless broadband and or wireless printer will not run 2 currencies wireless is there away around this problem

  Hi Gwenbour,

  What is the number and the model of your keyboard and wireless mouse?

  Those are two different questions you must connect your keyboard to your computer wireless mouse and the second is to connect to the wireless network. Try to solve one by one.

  Follow the steps mentioned in the link to connect to your keyboard and wireless mouse

  HP and Compaq PC - keyboard and wireless mouse troubleshooting

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=402580&prodTypeId=329290&ObjectID=c00006821

  You can use the quick start guide that came with your mouse and wireless keyboard to connect to your computer.

  Just do not connect to a network wireless broadband, follow the steps mentioned in the article.

  Wireless Network Management Center

  http://h20239.www2.HP.com/TechCenter/wireless/wireless_TS.htm

• How to connect a printer wireless to my XP laptop, the wizard does not allow wireless connections

  I have a Brother MFC-5895CW printer connected to my BT home hub and use it with success from other laptops with windows 7 of Mac operating systems.

  However, I am struggling to connect my XP Edition family Lap top.

  When I try to "add a printer" I don't get the option to install plug-and-play printers and therefore cannot find the printer that is already installed on my network wireless.

  Can someone please help.

  Thank you

  Paul

  Hello Paul,

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

  Here are some steps you can try:

  Method 1:

  Run the fixit of the printer and check:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:

  Try to download the driver from the following link and check:

  See complete software & driver Package or Add Printer Driver Wizard (Microsoft WHQL certified*) from the following link:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=mfc5895cw_us_eu&dlid=&flang=English&OS=7&type2=-1

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For further reference:

  To connect to a printer on a network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.