How to connect printer 2.4 Ghz band dual band Airport Extreme?

Similar Questions

• connect an old Belkin router to a new Airport Extreme

  Connect my old Belkin N300 router to my Airport Extreme new would have any advantage to do?  What would be the benefits?

  I would only do this if you have any questions using the router Apple on say a PC or a customer who don't will connect easily to the AE directly.

  You must connect by ethernet... and configure the Bellkin in mode Bypass WAN... Just google that... unless it of a very recent model and has WAP mode built in.

  What question first of all of your problems. If you need help post again with the why so we have an idea how to do the installation.

• M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

  Any help is appreciated.

  This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

  I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

  I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

  Any help is trully appreciated.  Thank you.

  Hello

  The Jetdirect 3000w feature:

  http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

  It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

  http://support.HP.com/us-en/document/c04762612

  Kind regards.

• Why some devices (like the PS3) connects through the 5 Ghz band? (EA3500)

  Just installed a Linksys N750 (EA3500) router (WAN - LAN Configuration).

  I have set the two broadband networks: 2.4 Ghz and 5 GHz with different SSID and different WAP/WAP2 staff mixt.

  While some devices display correctly the two networks, I am facing problems with the 5 GHz band and wonder if it's the breath of some sort of failure:

  -My iPad offered the two signals and allow me to define the 5 Ghz band, but it is showing the weak signals and stall when loading Web pages; as soon as I put it instead on the 2.4 Ghz band, (standing at the same place, of course), what's up, excellent signal.

  -J' have a Mac Mini and the location of the PS3 side by side.  The Mac Mini seems to work perfectly in both bands, 2.4 or 5 - excellent signal. However, the PS3 has failed his test of connection and indicates that the signal is not noticeable on the 5 GHz. But connect as a wink on the 2.4 Ghz band.

  -Got on and off voltage signal of 5 GHz on a laptop; connected to 2.4 Ghz, everything works perfectly.

  -iPhone 4s: I can't even see the SSID of 5 GHz, but I get the 2.4 so Guess account...

  So I'm tempted to conclude that some devices can not just keep up (?) to connect on 5 GHz...  But... a PS3? ... Huumm... (but true: PS3 came out in 2006...)

  No logic to this?

  Thank you

  Rob

  There are devices just wireless which are not turned on or is not compatible to work with a network of Ghz band. The WiFi feature may not be up-to-date or limited to only work with a network of 2.4 Ghz. In your case, you might want to check with Sony so PS3 can be updated to work with a network of 5 GHz.

• How to extend a WiFi router network not Apple using Airport Extreme and Express?

  My cable ISP company just gave me a new modem/router - a DG of Arris - 2470. For the last two years I used a cable modem independent older with a connected Airport Extreme (both located on the ground floor) and an Airport Express station on the floor as an Extender. I was very happy with the power of the signal around the House.

  Since his arrival to the Arris router my signal has become very low to the floor. I would use my two Apple devices to extend/boost my network, but do not know how to do this.

  Thank you!

  Basically, you have two options:

  1. (Best overall performance of the network) Connect the extreme and Express on the Arris Ethernet gateway device and configure all for a traveling-type network. This would require an Ethernet connection between all routers that can be accomplished by either using Ethernet cable or the use of mains adapters.
  2. (The overall performance of the adequate network) Simply connect the extreme to the Arris Ethernet, then extend the extreme using the Express.

  Which of these do you prefer?

• How can I change the physical address associated with my Airport Extreme

  I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

  To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

• How to configure WRT54G as a follow-up to my Airport extreme "n".

  I bought a WRT54G version 1 less than 6 months ago.

  Last week I got a Time Capsule from Apple with Airport Extreme 802.11n.

  As the Time Capsule AE "n" will be faster,

  I would use it rather than the main router.

  But how do the WRT54G an extension

  EI?

  basically is there a way I can configure two routers to work

  together and make the best of each?

  Thanks in advance

  Ignore the saber_tooth. It is just repeat everything. If you have a WRT54G web interface is something like this. You have to change the next radio button to disable the DHCP server on the WRT to the ' DHCP server: "leave"Enabled"to"disabled. "

  On the same page, you will also need to change the "local IP address". The default is 192.168.1.1. You must change this IP address to an available inside the Apple LAN address. The LAN on the most convenient airport is set up under the network tab of the Airport utility (at least on Windows version). The standard is to "distribute IP addresses" and "share a single IP address (using DHCP and NAT)" and to use the addressing 10.0.1.1/24.

  You can also view this information on Windows, in a command prompt window by entering "ipconfig". The interesting information is the IP address on the connection to the local network, the subnet mask and the default gateway. On a Mac, type "ifconfig" in a Terminal. Search the en0 interface, which should display the IP address after "inet" and the network mask. You will find the entry door with "netstat - rn". Locate the line of destination 'by default'. It shows the door entry in the second column.

  The subnet mask or network mask is usually 255.255.255.0 or 0xffffff00. With this subnet mask, all IP addresses with the same three digits belong to the same subnet. If you have an IP 10.0.1.123 with subnet mask 255.255.255.0 IP address 10.0.1.1 - 254 belong to the subnet. All IP addresses would be possible. Of course, you can not choose the IP address of the gateway (Airport). I don't know what IP address the airport itself uses by default. If you have any doubts, after the IP address, gateway address and subnet mask that you found on a computer that is connected to the Airport (i.e. The WRT not connected anywhere).

• I forgot how to connect printer wizard can not find material or location I had it before but I moved and I forgot how to do this

  where to look in to connect my printer?

  Hi jody levy,.

  1. what happens when you connect the printer to the computer?

  2. you receive an error message?

  3. What is the serial number and model of the printer?

  See the links below and check if it helps.

  To connect a printer directly to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_local_printerw.mspx?mfr=true

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

• BlackBerry Z30 how Z30 connect more channel 5 GHz wifi?

  Hello.

  I have a question about Wi-Fi 5 GHz with my Z30.

  In my family, I use Asus RT-AC68U router for internet with wired and Wireless.

  My other devices like IPad 2, office (use of adapter wlan Intel AC-7260) works well without any problem in any wifi 5 GHz channels but my Z30 is only can detect and connect wifi 5 GHz network when the channel is 36 ~ range 48 and 149, Z30 cannot detect wifi 5 GHz network at all so I can't connect it.

  Is there any method I can do my Z30 connect wifi 5 GHz using 149 and above channels?

  Moreover, I was wanted for this and I saw advice wifi knotty too, but he didn't give advice for this problem...

  I received the response of the Crackberry Z30 forum raised yesterday.

  I've linked the answer below,

  Answer forum CrackBerry Z30

  In any case thank you who read this question.

• How to connect W XP to DSL with Dual Boot Windows 7 Pro & Windows XP Pro,

  Have Windows 7 Pro & Windows XP Pro installed in a dual-boot on a new computer configuration. Have Windows 7 Pro connected to the DSL through a wired connection to the Cisco router. How can I connect Windows XP to DSL, via wired or wireless?

  Hello

  Thanks for posting your query in Microsoft Community.

   

  I understand that you must also connect the Windows XP operating system to a network.

  Here are a few steps to do this, please follow.

  Step 1: Set up Windows XP DSL Connection: using the new network connection wizard.

  1. Click Start and follow the path: programs-> Accessories-> Communications.

  2. Select the New Connection Wizard , and then click Next.

  3. There are several options in the wizard. You set a Windows XP DSL connection, select the option above that says to connect to the internet and click Next.

  4. Select Setup my connection manually and click Next.

  5. Here, there are three options. The first is for the modem connection, so we must not select. If your DSL account is always enabled, select the third option and click Finish and see the next section on IP addresses. If your DSL account is a limited account, which requires the password, select the second option and click Next.

  6. Enter a name for this connection, and then click Next.

  7. In this screen, enter your DSL ID and the password that you got from the ISP. Click Finish.

  Hope this information is useful. Please update the status of this issue. Do not hesitate to contact us to get help with the Windows operating system. We are happy to help you.

  Thank you.

• I want to connect to my existing to a new router Airport extreme

  I want to connect my extreme from the airport in a new router upgraded.  What should I do?

  Consult this manual.

  https://manuals.info.Apple.com/manuals/1000/MA1644/en_US/airport_extreme_80211ac _setup.pdf

• How to create a network redundant ISP failover using 2 Airport Extreme

  Hello friends,

  I have 2 different lines of rented ISP related to my Airport Extreme 2. Was curious to know if these 2 AEs can be interconnected somehow to create a network of ISP failover. Users on AE 1 traffic would be transparent reassigned to the AE 2 and vice versa, if corresponding ISP fails. When the access provider is in place, they will return to their AE in elementary school.

  Thank you.

  Not without a smart dual wan router. That is to say done good load sharing.

  Extreme is about as simple a router you can find... He has the absolute minimum of functionality.

  Users on AE 1 traffic would be reassigned transparent to the AE 2 and vice versa

  You can do this by using some manual intervention... a simple change of entry door is usually sufficient.

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• Independent 5 GHz band Aironet 1041

  Hello

  I do a base installation of X 8 of 1041.

  All devices must connect to the 5 GHz band.

  The specification of the 1041 says its supports 802.11 a/b/g/n on the 2.4 Ghz + 5 Ghz band.

  When you configure the 1041 I see only the options related to the 2.4 Ghz band, I see nothing of 5 GHz.

  Am I missing something really simple here, how to activate the 5 GHz band?

  Any help would be greatly appreciated.

  Thank you very much

  G

  Check the model you need to see if maybe it has 2.4 ghz only. You can also make a worm see check it.

  You can reference this sheet for part number

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps11203/data _...

  Sent from my iPhone

• Airport Express is no longer connect to Airport Extreme

  OK, it's kinda a complicated question.  For starters, I will describe my current setup:

  Cable modem Motorola-> Airport Express #1-->(Ethernet over powerline)-> Airport Extreme-> multiple Airport Express for AirPlay

  Airport Extreme and Airport Express #1 are put in place to create wireless networks, with different names for 2.4 Ghz and 5 GHz frequencies.  I love this configuration because it allows me to play music simultaneously on the four different speakers hooked to my Airport Express units while offering good coverage in my apartment together.  It worked perfectly until two days ago when two of the Airport Express units lost their connection and are now flashing yellow.  I tried to restart the Airport Express and Airport Extreme, but nothing helped.  When I launch iStumbler, it looks like Airport Express #1 and Airport Extreme both create networks of right, but who is the Airport Extreme 802. 11A instead of 802.11n - don't know if it of a problem or not.  I suspect that the Airport Extreme is not working properly because when my wireless connection when you use my iPad near the Airport Extreme, that used to be solid as a rock, is now uneven intermittently.

  Any ideas on how I can solve this?  Thank you very much!

  It sounds like your extreme is the very old Gen1 or Gen2 model without dual band.

  Back to the factory and start over. It's the best way to solve problems... reboot is worth a trial, but in the end, you sometimes just have to redo the installation.