How to connect the DELETE keys and BACKSPACE in the text box?

Similar Questions

• Am I able to configure a wireless iMac keyboard to emulate the way a Windows keyboard responds to a depression of the DELETE keys and BACKSPACE?

  Am I able to configure a wireless iMac keyboard to emulate the way a Windows keyboard responds to a depression of the DELETE keys and BACKSPACE? I want to delete either to the left right GOLD of the cursor. By pressing the DELETE key on Mac does remove one way, but I want the ability to delete in both directions. The Windows keyboard provides a delete key to remove to the right and a key to return back to remove to the left. So I can configure an iMac for this keyboard? My thought is to keep the delete key as it is and ADD a new function to one of the function keys to delete characters to the left. Thanks for your time and your help.

  Mac can go both ways, in case this is useful.  You can use fn more delete to delete to the right.  Also control more.

• Using paint and how to change the text box.

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium?  Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

  The painting is a very simple program and does not support the re - select a text box to change the content.

  "mikecvista" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium? Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

• How to change the text box in Acrobat XI, created by earlier versions of Acrobat

  Hi, I'm having a hard time trying to figure out how to change a text box that was created in an older version of Acrobat and used to fill in a form.

  In my case, I added text boxes on text pre-existing using an earlier version of Acrobat.

  When I try to click on the text box, however, it seems to be back on the existing text and not allow me to change the text box I created in the past.

  Try changing the text with the tool 'Add comment text' which is in the notes pane. The text used to complete the form may have been written as annotation, so when you try to change those with editing tools, the original text is being edited.

• How to remove the text box enclosing white

  Hello

  I am a student in multimedia and need to create a portfolio manager and would like to know how to remove the white text box when writing text? Already, I have a background and would like to have white on bakground or plain black writing, don't want the white bounding box. How can I remove that?

  Thank you

  This depends really on what type of Member of text that you used, but in general, you should select the sprite on the stage, then go to the Sprite of the property inspector tab.  Find the ink setting and change into Transparent or Matt.

• How to make the text box with scrollbar

  I am just learning CSS and Dreamweaver CS4. I have a page that has a lot of text and go on a background image. I need to make one of these text boxes I've seen who can be put in the center of the page and has a slider for people bar can read all the text. I might look for it, but I have no idea what they are called. I tried Googling some names I thought it could be, but they turned out not to do.

  Could someone tell me what they are called and point me to a tutorial on how to make one in Dreamweaver?

  Thank you very much!

  Carole

  Scrolling CSS Division

  {#divName}

  Width: 500px;

  height: 400px; / * adjust the height as required * /.

  overflow: scroll;

  }

  More information about the overflow property

  http://www.w3schools.com/CSS/pr_pos_overflow.asp

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• How to clean the text boxes empty?

  Several times after that place text may be necessary to remove it (by selecting the entire kitchen) but in the pages will remain areas of text without text like skeletons. It is possible to clean them without deleting the pages? For example, you want to make radical changes related only to the text, but does not alter the images placed just to just title. Bring you new text after you have removed the old (like selecting), but the old empty boxes are there, forcing the user to remove, usually behind and almost hidden. Maybe it's a script Forum thread?

  If you simply want to remove empty blocks of text, try this:

  myDocument var = app.activeDocument;

  var myStories = myDocument.stories;

  for (var myCounter = 0; myCounter< mystories.length;="">

  var monarticle = myStories [myCounter];

  var myTextFrames = myStory.textContainers;

  var myNumberOfFrames = myTextFrames.length - 1;

  While (myTextFrames [myNumberOfFrames] .silence == false) {}

  myTextFrames [myNumberOfFrames] () .remove;

  -myNumberOfFrames;

  }

  }

  But I may have misunderstood what you want.

  Jeremy

• How to disable the text box field

  Please help me out on the following points.
  
  How to turn off the text area in master form of master detail form

  1. you must mention in which case you want that a field should be disabled

  2. in my example there is an event based deactivation of elements - select list P18_ENABLE_DISABLE, try changing the values. It's exactly what you want. The only difference is that the calculation is triggered when key hidden form element is not null.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• APEX form - how to align the text boxes

  Hello

  I'm creating a form and I have a few text fields bordered square... Unfortunately, it is not aligning... This is how it manifests itself.

  

  Here is the configuration

  

  Thank you

  Developing using the button display the grid on the developer toolbar. In this way, you can see the grid changes and check the settings of the grid if necessary.

  

  As pleNn have already said, the question mark is automatically added if you have a help text for an element. It's probably nothing more than "enter the value for the number of trips. You can delete the help text if it is not useful.

• Rotate the text box

  After you place a text box on the comment, drawing Annotations toolbar, how to rotate the text box? Adobe X Pro.  Why is it so difficult? like most other text editors make this clear by providing a tool or a choice of change by right-clicking.

  • turn the page
  • Add the text box
  • Turn the page back

• Satellite A100 - by pressing the Enter key and BACKSPACE insert a backslash

  The keyboard on my Satellite A100 has a perculiar behavior.
  The Enter key and BACKSPACE times return the insertion point to the beginning of the next line, and then insert a backslash.

  The behavior is similar in various products such as MS Word, internet Explorer, Notepad, WordPad, to name a few.
  The BACKSPACE key returns to the top of the page in MS Word and Notepad.

  This behavior is very frustrating and makes every day very difficult calculation.

  Does anyone have a solution to this problem

  Hello

  First I thought that this could be a result keyboard or Ms Word, Notepad setting language setting
  But while reading the story one more time, I think that this problem could be linked to the failure of hardware.
  But this is just a suggestion.

  I put t know if this problem would appear on new recovered BONES.
  Have you tried to restore the operating system using the Toshiba Recovery CD?
  Maybe you should do to see if it's really a hardware problem

  Good luck

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• How to connect the slot button Cascades

  I am new to waterfalls and QML and yesterday I tried to port native QtWidget app to waterfalls, but it does not. The problem is, I add some buttons to the container in QML main file and coded my custom slot function which should be executed when the user click some button. But I don't know how to connect the clicked() signal to my function from the custom location.

  When using

  Connect (CloseButton, signal(Button::clicked()),this,slot(on_closeButton_clicked()));) or connect (exitButton, SIGNAL (clicked ()), this, SLOT (on_exitButton_clicked ())); I get error "unable to connect SIGNAL (null) to SLOT (on_closeButton_clicked ()) ' on all the buttons.

  Here is my code in app.cpp

  App::App()
  {
      QmlDocument *qml = QmlDocument::create("main.qml");
      qml->setContextProperty("cs", this);
  
      AbstractPane *root = qml->createRootNode();
      Application::setScene(root);
      textHolder = root->findChild("textHolder");
      openButton = root->findChild("openButton");
      saveButton = root->findChild("saveButton");
      saveAsButton = root->findChild("saveAsButton");
      closeButton = root->findChild("closeButton");
      exitButton = root->findChild("exitButton");
  
      connect(openButton,SIGNAL(Button::clicked()),this,SLOT(on_openButton_clicked()));
      connect(saveButton,SIGNAL(Button::clicked()),this,SLOT(on_saveButton_clicked()));
      connect(saveAsButton,SIGNAL(Button::clicked()),this,SLOT(on_saveAsButton_clicked()));
      connect(closeButton,SIGNAL(Button::clicked()),this,SLOT(on_closeButton_clicked()));
      connect(exitButton,SIGNAL(clicked()),this,SLOT(on_exitButton_clicked()));
  }
  
  //one slot function
  
  void App::on_closeButton_clicked()
  {
  //ui->textEdit->clear();
      textHolder->resetText();
  //if(file.open(QIODevice::ReadOnly | QIODevice::Text)){
      file.close();
      fileName.clear();
  //}
  }
  

  And qml

  import bb.cascades 1.0
  
  Page {
      id: mainPage
      content:
      Container {
      id: main
      Container {
      id: buttonHolder
      scrollMode: ScrollMode.None
              layout: StackLayout {
                  layoutDirection: LayoutDirection.LeftToRight
                  leftPadding: 5.0
                  rightPadding: 5.0
                  topPadding: 5.0
                  bottomPadding: 5.0
              }
              touchPropagationMode: TouchPropagationMode.None
              objectName: "buttonHolder"
              Button {
                  id: openButton
                  text: "Open"
              }
              Button {
                  id: closeButton
                  text: "Close"
                  onClicked: {
                  }
              }
              Button {
                  id: saveButton
                  text: "Save"
                  onClicked: {
                  }
              }
              Button {
                  id: saveAsButton
                  text: "Save As"
                  onClicked: {
                  }
              }
              Button {
                  id: exitButton
                  text: "Exit"
              }
          }
  
      //********************************
          Container {
              id: textHolderArea
              layout: AbsoluteLayout {
              }
              topMargin: 5.0
              leftMargin: 1.0
              rightMargin: 1.0
              bottomMargin: 2.0
              TextArea {
                  id: textHolder
                  textStyle.fontStyleHint: FontStyleHint.Default
                  layoutProperties: AbsoluteLayoutProperties {
                  }
                  leftMargin: 5.0
                  rightMargin: 5.0
                  preferredHeight: 645.0
                  textStyle.justification: TextJustification.Enabled
                  objectName: "textHolder"
                  text: ""
              }
          }
      //********************************
      }
  }
  

  And I have no idea how call my app.cpp C++ slot in my main QML file

  Your buttons should an objectName set to be visible to C++, the id is only visible inside the QML.