How to connect the Pavilion to Panasonic th42px80b with windows 8.1

Similar Questions

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• How to decompress the files downloaded for use with Windows 7?

  How to decompress the files downloaded for use with Windows 7.  Specifically, zip files are a Magellan GPS unit.

  There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files

• How to make the printer deskjet 3940 compatible with Windows 7 Home Basic, 32-bit?

  I have the HP Deskjet 3940 printer. I recently bought a Lenovo (C320, 57-302429) desktop computer that has Windows 7 home basic, 32-bit operating system. The said printer does not work with the computer above. Please guide how to make this printer compatible with the operating system above.

  1. click on the Start button, select Control Panel and double-click devices and printers.

  2. click on Add a printer.

  3. Select Add a local printer.

  4. Select an existing Local USBx port, click Next.

  5. click on the Windows Update button.

  6. once the update is complete, locate the 3940 driver.

  7. click on Next,Next,Next,Next,Finish

• How to use the diagnostic utility equipment HP with Windows 8?

  HP just put on a great video that will show you how to use HP Hardware Diagnostic Utility in Windows 8.  This utility can be used with some HP printers to determine what is the problem with the hardware.  It can help clarify many common hardware problems.

  Download and run the utility of Diagnostic equipment of HP (HDU)

  I hope this helps.

• 210 mobile G1: how to recreate the image on a laptop with Windows 7 210 installed on the device

  Hello

  I try to put an image that has been created in the image of fog service 1.2 and am having problems starting the fog in ipxe. I tried to update the chip set drivers and the network drivers with no luck. When you start first in ipxe, the machine acts like it wants to register the machine, but then it just keeps restarting. I can never get fog gui so that I can recreate the image on the machine. Any suggestions on what I need to do to make this work. I have 30 laptops to recreate the image.

  Thank you in advance,

  Angie

  Step 1: Copy the Source files to the PXE server

  In this step, you copy Windows PE source files to your PXE server.

  1. On your computer, click Start, point to programs, point to Microsoft Windows OPK or Windows AIK, and then click Windows PE tools command prompt.
     The menu shortcut opens a command prompt window and automatically sets environment variables to point to all the necessary tools. By default, all tools are installed in C:\Program Files\\Tools, where can be Windows OPK or Windows AIK.
  2. Run the Copype.cmd script. The script requires two arguments: architecture and destination location of the hardware store.
      

• How to install the printer Laserjet 1012 HP with Windows 7?

  Original title: printer problem

  I have a 1012 HP Lazerjet printer I want to install on my new system of windows 7?  Please help me!

  Hi pilsberydoughboy,

  It seems that there is no driver for Windows 7 for HP 1012 Laserjet Printer. However, some people managed to get the printer to work in following some of the suggestions in this thread.

  LaserJet 1012 Windows 7 drivers

  http://forums13.itrc.HP.com/service/forums/QuestionAnswer.do?admit=109447627+1285148706253+28353475&ThreadId=1381135

  See if it does the same thing for you.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• How to connect the slot button Cascades

  I am new to waterfalls and QML and yesterday I tried to port native QtWidget app to waterfalls, but it does not. The problem is, I add some buttons to the container in QML main file and coded my custom slot function which should be executed when the user click some button. But I don't know how to connect the clicked() signal to my function from the custom location.

  When using

  Connect (CloseButton, signal(Button::clicked()),this,slot(on_closeButton_clicked()));) or connect (exitButton, SIGNAL (clicked ()), this, SLOT (on_exitButton_clicked ())); I get error "unable to connect SIGNAL (null) to SLOT (on_closeButton_clicked ()) ' on all the buttons.

  Here is my code in app.cpp

  App::App()
  {
      QmlDocument *qml = QmlDocument::create("main.qml");
      qml->setContextProperty("cs", this);
  
      AbstractPane *root = qml->createRootNode();
      Application::setScene(root);
      textHolder = root->findChild("textHolder");
      openButton = root->findChild("openButton");
      saveButton = root->findChild("saveButton");
      saveAsButton = root->findChild("saveAsButton");
      closeButton = root->findChild("closeButton");
      exitButton = root->findChild("exitButton");
  
      connect(openButton,SIGNAL(Button::clicked()),this,SLOT(on_openButton_clicked()));
      connect(saveButton,SIGNAL(Button::clicked()),this,SLOT(on_saveButton_clicked()));
      connect(saveAsButton,SIGNAL(Button::clicked()),this,SLOT(on_saveAsButton_clicked()));
      connect(closeButton,SIGNAL(Button::clicked()),this,SLOT(on_closeButton_clicked()));
      connect(exitButton,SIGNAL(clicked()),this,SLOT(on_exitButton_clicked()));
  }
  
  //one slot function
  
  void App::on_closeButton_clicked()
  {
  //ui->textEdit->clear();
      textHolder->resetText();
  //if(file.open(QIODevice::ReadOnly | QIODevice::Text)){
      file.close();
      fileName.clear();
  //}
  }
  

  And qml

  import bb.cascades 1.0
  
  Page {
      id: mainPage
      content:
      Container {
      id: main
      Container {
      id: buttonHolder
      scrollMode: ScrollMode.None
              layout: StackLayout {
                  layoutDirection: LayoutDirection.LeftToRight
                  leftPadding: 5.0
                  rightPadding: 5.0
                  topPadding: 5.0
                  bottomPadding: 5.0
              }
              touchPropagationMode: TouchPropagationMode.None
              objectName: "buttonHolder"
              Button {
                  id: openButton
                  text: "Open"
              }
              Button {
                  id: closeButton
                  text: "Close"
                  onClicked: {
                  }
              }
              Button {
                  id: saveButton
                  text: "Save"
                  onClicked: {
                  }
              }
              Button {
                  id: saveAsButton
                  text: "Save As"
                  onClicked: {
                  }
              }
              Button {
                  id: exitButton
                  text: "Exit"
              }
          }
  
      //********************************
          Container {
              id: textHolderArea
              layout: AbsoluteLayout {
              }
              topMargin: 5.0
              leftMargin: 1.0
              rightMargin: 1.0
              bottomMargin: 2.0
              TextArea {
                  id: textHolder
                  textStyle.fontStyleHint: FontStyleHint.Default
                  layoutProperties: AbsoluteLayoutProperties {
                  }
                  leftMargin: 5.0
                  rightMargin: 5.0
                  preferredHeight: 645.0
                  textStyle.justification: TextJustification.Enabled
                  objectName: "textHolder"
                  text: ""
              }
          }
      //********************************
      }
  }
  

  And I have no idea how call my app.cpp C++ slot in my main QML file

  Your buttons should an objectName set to be visible to C++, the id is only visible inside the QML.

• How to connect the bluetooth iball-groovy head game

  How to connect the bluetooth iball-groovy head game

  Hi Gurushankar,

  You can consult the following articles and check.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps.