How to connect the Qosmio G20 to screen plasma HD

Similar Questions

• How to connect the Qosmio G20 156 to DTT2200 sound creative

  Can someone recommend the best way to connect my G20-156 sound creativity works 5.1 desktop theater DTT2200. This was connected to a PC so I think a card external sound would be via a USB port, but is this the best way and that model?

  Hello

  I put t know what cables and what made the 5.1 support desktop theater DTT2200 but the Qosmio supports headphones with S/PDIF out.

  I use the headphone jack on my satellite to connect the unit to the stereo.
  I use a cable with a connector on one end and RCA connectors (red and white) 2 on the other end of the cable.
  The two connectors, I connected to HiFi and taking helmet.

  I think you can also try to use the same way to connect external speakers for the Qosmio.

• How to use the Qosmio DX730 as screen

  I use All in One PC DX730 Qosmio.

  Is it possible to make the windows Start / computer to use the display as a monitor?

  Sometimes, I need to see a file on my old PC Tower and I would not have an additional screen for that - well on the DX730 is removed during this operation.

  Thank you for inform

  Hello
  your pc need a destop map grafik with an hdmi output, if there you can connect the Qosmio dx730 with your 'OLD' destop pc and use the Qosmio as a screen.

  I think it is the only possibility.

• How to connect the Qosmio F50 to TV

  Hello!

  I would like to know what to do to connect my Qosmio TV ba.

  Basically, I want to be able to watch movies and videos that I create on my house. I can't find the usual cable output... Maybe there is a kind new cable for this. (I'm not an expert as you can see...)

  Thanks for your help!

  Nuno

  And what cable you want tuse?
  With other words, video output port that you want to use on your Qosmio laptop?

• How to connect the Qosmio G50 for set-top box

  I just got a Qosmio G50.
  I am trying to connect to media player via my cable box.

  The manual says to connect via an rf cable.
  But as the signal is provided by cable SCART, of course, this won't work.

  Anyone has any suggestions as how work around this problem.

  Thanks in advance

  I agree with Akuma.
  Check the connections you may want to use a different connection.

  If you use an adapter, this could make problems.

• How to connect a Qosmio G20 to a TV?

  Hi, I posted here a long time ago and I have not yet found a solution to this problem.

  I want to connect my laptop to my TV. I'm always in another room, so I'll be either hanging up to 21 "Toshiba, or 32" Sony or 51 "Toshiba - I don't know if hang to different brands of TV will create a problem. I tried to plug the laptop computer with an S-video cable and a DVI cable (who both wired SCART at one end).

  I can't get the thing to work with a TV! Here is exactly what I do when I try:

  * I click on start then click on Control Panel
  * I click on 'appearance and themes '.
  * I click on "display".
  * I click on the tab "settings".
  * I click on 'Advanced '.
  * I click on the tab "GeForce Go 6600.
  * I select settings to make me a clone view on digital flat screen and a TV.
  * I click "Device settings" to make sure that all the settings of the TV are correct.
  * I press "Apply" and nothing happens!

  Can someone help me? I've had this laptop for centuries and I still have this feature not to work! Any help will be really appreciated! I look forward to THE answers.

  Thank you very much!

  You forgot to put a thing.
  Have you chosen the right channel of the TV, and you enabled the S-video on the TV?
  Check it out

  PS: You can switch to the external display also with the key FN + F5 combination

• Can I use the Qosmio G20 as a mediacentre?

  Hello
  Is it possible to really use the Qosmio as a mediacentre?
  I want to have the Qosmio in one piece and then plug the tom my TV and the audio Center in another room.
  For the photo I think than the DVI on can be used, but for the sound, which can be used?

  Everything must be used by the remote control.

  Allt sounds possible (on papar) but I failed to do as a speider web mediacentre in my house?

  Each of you?

  / Lars

  Hello

  If you want to connect the Qosmio g20 on the HIFI audio system I advise to use audio S/PDIF output line.
  The plug is the same as the headphone jack.
  I think you should be able to use it with the MCE or Qosmio player.
  I think that the remote control only works with MCE but I m not 100% sure.

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• Connection to (Qosmio G20) Surround sound

  I'm trying to connect my Qosmio G20 to my sysytem via an amp external surround sound.

  As far as I know I have everything connected correctly, but I'm only obtaining from my front left speakers and rear no where elsewhere.

  I checked the speakers and all the settings I can think on the laptop, is there something that I don't have to send the signal to all the speakers?

  Any help is greatly appreciated.

  Thank you very much

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect a Qosmio G30 to TV?

  I have a Qosmio G30 and a HD ready 37 "TV.
  How to connect the laptop to the TV?

  The cable I have is a SCART on one end to the TV and the other end to the laptop. It says in the manual to do this, then press Fn + F5. It does not work! I tried everything in the manual and results cannot do.

  Any ideas anyone?

  Any help much appreciated.

  It will work you choose the right TV channel. If please activate the right port on the TV and after doing this use FN + F5 and select the TV option. I tested it with my Qosmio G30, but using the HDMI connection.

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.