How to connect to DisplayPort and fresh?

Similar Questions

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect a wrt150n and a whole wndr3400v2 to extend your wireless connection

  How to connect these two wireless routers, but the first as a main router without losing my security and configuration of port forwarding?

  Thank you in advance for your help!

  Thank you very much for the help. The wndr3400v2 is enough for my house. Yes, problem solved.

• have satalite, how to connect sony bravia and blue ray player to wired dsl internet

  have satalite tv, how to connect my player blue ray sony bravia tv and sony to a wired ADSL internet connection,

  Hello

  What do you mean exactly when you say hacking people have constantly been in?

  If you feel that your computer can be hacked, I recommend you install a good antivirus. You can install Microsoft Security Essential. This is a Microsoft free anti-virus program.

  To secure the wireless connection, go through the steps from the link and check if it fits your need. Browse the article to learn more about securing your wireless connection.

  Hope this helps and let us know if you need assistance in the future. We will be happy to help you.

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• How to connect Equium A100 and second computer via LAN

  Hello

  I was wondering if someone could help me.
  My partner and I have some difficulty with the creation of a local network between its computer and my laptop.

  Basically, the main thing is that the computer can see my laptop, but it isn't recipricating.
  My laptop is the Equium A100 (XP media Center) and as far as we know really on his computer, it's that his dual pentium 4, windows XP Home Edition and it is a pain full in the back!

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  It is described how you can connect two PCs using cross-over cable.

• Qosmio G30-126: how simultaneously connect analog TV and TV satellite

  Hi, I have a Qosmio G30-126 and you have a problem with receiving simultaneous TV analog (by TV-in the port of integrated TV tuner) and satellite satellite set - top box (by AV-in ports).

  I can't program Windows Media Center for analog TV (but not satellite STB) per port, TV antenna and it works perfectly.
  I can't program Windows Media Center for digital satellite STB (but no TV analog) channels by AV-in port and it works perfectly.
  But I can't program Windows Media Center for the two TV analog I satellite STB, because during programming WMC forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.

  For me, it's a big problem, because I have cable (analog) TV and satellite STB with digital channels. And I want to watch all the channels on my Qosmio.
  Could someone help me?

  >... because during the WMC program forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.
  I think that in this statement you answered your question. I got Qosmio G30 a long time ago, and I also know that WMC can't handle with two sources of signals at the same time.
  To confirm that contact Microsoft and ask them. I mean that they have designed WMC and know how it works exactly.

  Toshiba has to provide suitable equipment (TV tuner) to provide the TV option on this laptop.

• How to connect an lvdt and cell to usb 6008

  Please help me iam do not know how to choose a daq card. looking for a lost lt but iam.

  I want to measure the force and displacement at the same time a bench test of suspension and I wanted to use or usb6008 because of my budget for the project.

  can I use this daq card to measure these parameters?

  answer please... Thanks in advance.

  Hi Sylvia,.

  To be able to determine or not with a box NI USB-6008 would be appropriate for your application, it would be useful to get a little more information on measures you can take. If possible you would be able to provide the range of voltage, you intend to measure with your instruments and sampling rate, you need?

  I also noticed in the subject line you use an LVDT, will you also production for this tension with the 6008 or this will be done separately?

  To give you some setting in context, the NI USB-6008 case does not really simultaneous readings at every moment, but will be replacing rapdily between channels, to give effectively simultaneous samples. As this unit has a sampling rate of 10 kech. / s, and you use 2 channels, the sampling rate effective for each entry would be 5 kech. / s.

• How to connect the local and Remote Desktop (Android OS) application simultaneously without one shot the other in the login screen?

  I want to connect to my local office via the remote desktop connection, but keep both connected at the same time without being local or remote kicking each other in the bridge/connection between the two. I tried to download and patch the termsrv.dll using UniversalTermsrvPatch - x 86 .exe for Windows Xp 32-bit SP3 compatibility. But still... Settings app may prevent 2 to be connected at the same time? If so could Microsoft please update their app. Any suggestions...

  Try this link for desktop connection xp remotely.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=7208

• How to connect a wireless and boardband on HP laptop wireless mouse

  Using XP on a laptop HP with mouse & keyboard wireless can not connect to wireless broadband and or wireless printer will not run 2 currencies wireless is there away around this problem

  Hi Gwenbour,

  What is the number and the model of your keyboard and wireless mouse?

  Those are two different questions you must connect your keyboard to your computer wireless mouse and the second is to connect to the wireless network. Try to solve one by one.

  Follow the steps mentioned in the link to connect to your keyboard and wireless mouse

  HP and Compaq PC - keyboard and wireless mouse troubleshooting

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=402580&prodTypeId=329290&ObjectID=c00006821

  You can use the quick start guide that came with your mouse and wireless keyboard to connect to your computer.

  Just do not connect to a network wireless broadband, follow the steps mentioned in the article.

  Wireless Network Management Center

  http://h20239.www2.HP.com/TechCenter/wireless/wireless_TS.htm

• How to connect on windows and stay without the computer back to connection

  When I login to windows 7 everything working, I can stop to read the reference books or leave my desk momentarily, period during which the screen will return to the login page of windows so I have to get my password again.  How can I stop this happen by changing a few settings?

  Hello:

  Go to your appearance and personalization in the control panel section.

  In the first section of personalization, click change screen saver.

  Uncheck the box that says "On Resume, logon screen."

  Paul

• my router cannot find my printer printer how to connect the printer and the router?

  I'm new to computers, as you probably know, and I think it has something to do with the IP address on the prienter.  But that'sd just a guess.  Any help please, it's probably something simple, but I'm clueless as to what to do

  What is the make and model printer?

  No doubt you want to configure for wireless connection, and if so did you use the printer installation cd?

• How to connect Forms 6i and reports 6i with oracle 10g R2?

  Hey everybody,
  
  I need your help in linking the two Forms 6i and reports 6i with Oracle 10 g Release 2 db, MS Access(2003, 2007) and SQL database (Microsoft Visual Studio 2008). I am a newbie. I installed all the on my laptop HP with Windows 7 installed Ultimate(32 bit OS). I want to generate reports and forms by accessing data from databases mentioned above. Please provide me with the configuration steps.
  
  Thanks in advance...!

  Being new to the forum, I encourage you to consider the following before you post much more:

  http://blogs.Oracle.com/Shay/entry/10_commandments_for_the_otn_fo

  As for your question, I hope that you read my posts.

  As I mentioned, form/reports 6 is very old and operating systems, you suggested that you will use are very new. This version of F/R is obsolete and expected that it works on a new operating system is not realistic. Why are spending you time with such an old version? Even if you're just trying to learn the product, learning with an old version is probably not a good idea.

  The tnsnames.ora file, you need to update is this: c:\orant\net80\admin

  If you want to learn how to use the product in detail, you probably won't be able to do it in a forum. It is not as if we were trying to learn MS Notepad. Forms/States (and all Oracle products) are enterprise-level products. All products Oracle would require that you spend time to review documentation and in many cases attend some courses to always be effective using them. You can find documents and training in countless places, including within the site of the Oracle. I recommend that you consider that your place of departure.

  Here are some examples:

  Forms of technical documents for most of the versions:
  http://www.Oracle.com/technetwork/Developer-Tools/Forms/Overview/index.html

  11.1.2 of Documentation Forms Library:
  http://docs.Oracle.com/CD/E24269_01/index.htm

  Archived forms documentation:
  http://www.Oracle.com/technetwork/documentation/dev-arch-093406.html

  Oracle Forms - Oracle Education
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=501

  The forms and the report generator online help is also a good place for more information that in some cases, the sample code is provided.

• How to connect PSD files and keep the visibility of layer object INDD

  I have a page with a number of related multi-layer PSD. These files PSD is still alive, with adjustment layers being added, being shifted and layers organized in folders, etc. Is there a way to link to these updates of PSD files without losing the visibility of the layer chosen in INDN perspective? I hope to set the object layer Options to display or hide the new layers in Photoshop, rather than having to define their brand new from scratch when a new layer is added to the PSD.

  Thank you.

  amy_h wrote:

  I guess that ID would use as the benchmark for the visibility layer name, since it's the only option we get control.

  But ID has no way of knowing you want to rely on names and positions not in the stack. Maybe one day this will change, but not soon. I'm sorry.