How to connect to the database for all reports EN

Similar Questions

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• How to permanently change the font for all emails color

  How can I change the color of the font for all my emails constantly?

  E-mail address is removed from the privacy *.

  Hello Msmouser,

  What mail client do you use?
  If you use Outlook, I suggest to look at this article:
  http://Office.Microsoft.com/en-us/Outlook-help/change-the-default-font-or-text-color-for-e-mail-messages-HA010239585.aspx
  If you use your web mail from Verizon, I would say that to visit the Verizon Mail support page:
  http://www22.Verizon.com/ResidentialHelp/
  If you use Windows Live Mail, please visit:
  http://www.windowslivehelp.com

• How to connect to a database for muse?

  I want to make a website using muse as a project for my college. It is essentially for the display of ads on the course for students to register, but the site should allow only students to enroll in courses by checking their user name and an ID that is stored in the database of my college. My question is how to connect the database on the site?

  You can not. You are looking in the wrong place. What you want requires a system dynamic like Joomla, Drupal, WordPress etc. or sign up for a pro BC account, where you can integrate these features through additional widgets and respective code snippets.

  Mylenium

• How to connect to the database that resides on the web server through blackberry application

  Hello

  I'm new to the Blackberry development. I want to develop an application that will get the values stored in a database on the server. And on the key event, it will again store the information in the database.

  I use Blackberry Java development environment Version: 4.2.0.98

  What should I do?

  To connect to the server, you can use HTTP or a sleeve. Search for HTTP and socket connection examples. Implementation depends on your condition.

  You can write in return of the application on the ground that can automatically syc.

• How can I change the settings for all instances of a particular effect?

  I applied the same color correction effect to many of the components of the package. Now I want to refine the correction of the colors (the same setting for all the clips yet). How can I change all instances of the effect of color correction setting without going into each clip manually?

  Looking forward to your thoughts on this! Go on and save my winter Assembly day ...

  Two ways, change a clip and then copy it, all the other clips, right-click / Remove effects, and then select Paste attributes. Another way is to add an adjustment layer and apply the color correction to that.

• Create null values in the database for interactive report link column values

  Hello
  
  I'm pretty new to APEX and tries to create an interactive report with the form. This report examines essentially for more information for a particular employee. If the employee has any information in the table, the report presents information with a button change beside him. If there is no record in the table for this employee, a create button appears. Now when you click create, a new creation page. This page contains the employee number as a single display field with the value from the previous page. This value is displayed in the page, but it is not in the database. Create the page has view-only number and a couple of other columns. The other columns get inserted into the table with an empty number!
  
  Can someone please? Looks like the page keeps the value zero for the number of the employee who came during the search of the interactive report. Hope I made myself clear, being the newbie hope I haven't used any incorrect terminology.
  
  Thank you!
  Robet

  Without the DB column, apex will not determine which DB column the data in this field are mapped to (it would be quite impossible to guess the destination since the name of the element column).

  If you want to assign to the previous element of the page, use the default section

  return: P1_EMP_NUM

  By default the value Type: body of the PLSQL function

  and configure the attributes of source as I said before

• How can I change the directory for all updates & patches (from C: to D :)

  I changed the "Install" directory in preferences, but I still over 2 GB in C:\ProgramData\Adobe. All or part of this is adjustable to D:\ProgramData\Adobe, for example? (I have only about 2 GB free on my C: drive.)

  some adobe files should go on your c drive.

  to move the directories of installation on your cc (with the exception of the lr) Player, uninstall everything that is installed on your c drive, change your installation directory in your cc desktop app, then (re) install in the directory has changed.

• SQL in Question actually. Select the items for all 12 months

  I am creating a notification request where I SUMMARIZED all of the amounts in the database for all 12 mount and come up with a result even if it isn't a amount totaled. I created a table called monthsInYear that has the ID (unique identifier) 1-12 and the months of Jan - Dec. I want SUM to the amount per month and arrived to the top with 12 results (one per month).

  I tried the query below, but sometimes with only 1 month and all amounts amounted to him.

  March

  484714.13

  I use:

  SELECT monthsInYear.month, IFNULL (SUM (income.amount), 0) AS amount

  OF monthsInYear

  Income ON EXTRACT(MONTH FROM income.dateAdded) = monthsInYear.monthID LEFT OUTER JOIN

  WHERE income.orgID = 10031

  AND the YEAR (income. DateAdded) = '2011'

  ORDER BY EXTRACT (MONTH FROM income.dateAdded) CSA

  Can someone tell me what I am doing wrong. I much prefer something like:

  January 3000

  February 3000

  March 4000

  April 0

  Maybe 5000

  June 6000

  July 5465

  ....

  But when I run the present, it gives me total for only the months which have in total and not 0 for those that go up as null. Any ideas?

  ....

  Also tried

  SELECT m.month, IFNULL (SUM (i.cost), 0) AS amount

  I have getExpenses LEFT OUTER JOIN monthsInYear m

  ON m.monthID = EXTRACT (MONTH FROM i.dateAdded)

  WHERE orgID = 10031

  AND YEAR (i.dateAdded) = '2011'

  GROUP BY m.month

  ORDER BY EXTRACT (MONTH FROM i.dateAdded) CSA

  There are two problems. First of all, in your join tables are reversed. A LEFT JOIN returns all the records in the left table (spending) even if there is no matching record in the table to the right. What you want, it's the opposite. If the month table should be on the left side of the JOIN:

  ...

  OF monthsInYear m LEFT JOIN getExpenses i m.monthID = EXTRACTION (i.dateAdded MONTH)

  Second, when there is no corresponding record in the expense, the column values will be null. So as soon as you use one of the fresh fields in your WHERE clause, that is to say

  WHERE i.orgID = 10031

  AND YEAR (i.dateAdded) = '2011'

  ... these missing documents are deleted, because a null value is never equal to what it is. So you are denying the outer join altogether. You must move these conditions in the JOIN clause instead:

  SELECT m.month, IFNULL (SUM (i.cost), 0) AS amount

  MonthsInyear LEFT OUTER JOIN getExpenses m I have

  ON m.monthID = EXTRACT (MONTH FROM i.dateAdded)

  AND i.orgID = 10031

  AND YEAR = 2011 (i.dateAdded)

  GROUP BY m.month

  ORDER BY m.month

• Get the DDL for all tables in a schema;

  Hello
  
  I tried to get the DDL for all tables under my own diagram "A". Here are the steps I've tried, but in vain I
  

   1. logged in as a user A 
  2. And the ran query 
            
  SELECT DBMS_METADATA.get_ddl ('TABLE', 'XYZ')
  FROM user_tables
        
  o/p
  (HugecloB)
  
  {code}
  
  Any idea how i can get the DDL for all the tables under my own schema ?
  
  
  Thank you so much!
  
  Edited by: user642297 on Feb 4, 2011 12:05 PM
  
  Edited by: user642297 on Feb 4, 2011 12:05 PM
  
  Edited by: user642297 on Feb 4, 2011 12:05 PM
  
  Edited by: user642297 on Feb 4, 2011 12:07 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Your idea is good, you missed only to use the correct table name:

  SELECT DBMS_METADATA.get_ddl ('TABLE', table_name)
  FROM user_tables;
  

  Concerning

• How to extract the ddl for all databases of links?

  DB: oracle11gr2

  Friends,

  I can get including db link the package DBMS ddl but could not able to find a way to extract the ddl for all the database link and the coil in a file recreate them in the future?

  Tried searching on OTN but no luck, if someone shares how them spool or point me to a particular forum that will be great.

  Thank you

  We may also use something simple, select as below to extract the ddl

  Select dbms_metadata.get_ddl ('DB_LINK', db_link, owner) vSQL of

  dba_db_links

  /

• How to change the password for all users in the database

  Hi buddies!
  
  Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
  
  Thank you.
  
  Nith
  
  Published by: user645399 on March 1, 2011 14:23

  Write the file spooling
  as

  Make sure that all profiles has password_verify_function with a NULL value

  then

  Select 'edit user' | username: ' identified by ;' from dba_users;

  you will get the output... you just run.