How to connect to the PC?

Similar Questions

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• How to connect to the internet via the wireless?

  I just bought my first laptop Toshiba L10, and I'm unable to start, how do I connect to the internet using the wireless feature and no track? More frustrating is how can I connect to the internet in the first place, wireless.
  Help, please.

  Hi Phil,

  To answer your questions in full, it would be quite a task but here is my simple guide: -.

  1. connect to the internet

  1.1 choose an ISP (provider of Internet Sertvice) and get a CD with the software and the connection information.

  1.2 load the CD and follow the onscreen instructions to set up your login information.

  1.3 If you use dial-up connect your cable modem to your laptop and the other end to your telephone line.

  1.4 If you are using broadband services to connect your CODEC to your USB port and the other cable to your microfilter attached to your telephone line.

  1.5 DO NOT START YOUR INTERNET CONNECTION UNLESS YOU HAVE ANTIVIRUS RUNNING ON YOUR LAPTOP.

  1.6 Click START-> CONNECT TO-> the connection created in 1.2 above

  For the wireless connection, the procedure is similar braodly but you need a router or wireless modem connected to your telephone line and properly configured in Notepad you.

  Follow step 1.5 with a lot of attention. If you connect to the internet without anit-virus software and firewall appropriate, it will be only a few seconds before your laptop computer will be infected with a form of virus. Please be careful.

  HTH

• How to connect with the Skype name?

  I used Skype on other PCs. I try to sign in to Skype on a new computer. I can't find the place where or how enter my Skype name to open a session? How do connect me with my Skype name?

  Never mind. Found and installed the desktop version of Skype.

  Problem solved!

• How to connect to the internet with no phone service

  I cancelled the phone service to my iphone 4 and now try to erase all content and settings but it rises as unable to join the network.  My network is fine as I use it on my new phone.  How can I get this phone to connect to the wi - fi so it will erase my information.  I already removed my icloud account phone but it still shows my i.d. apple on the phone and my phone number.  How can I get this information out there.

  Use

  Settings > general > reset > erase content and settings

• Satellite L450-181 - how to connect to the TV?

  How to connect my laptop to my Toshiba regza TV?

  Hi ian guest,.

  Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

  If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

• How to connect to the list of the pins for a redeclenchables pulse train

  Hello

  I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

  Any input on what to connect or pages that may make how to connect the counters would be very useful.

  Thank you.

  Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

  Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

  Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

  I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

  -Kevin P

• How to connect to the computer after having forgotten the password?

  Original title: PC return to me

  Hi, I appreciate any help you can give me here on this da - min pc. I had a password to get into it and I don't remember this "thing" so he used to let me in. How can I recover my pc thank you for any help you can give me

  Hello

  You don't tell us what operating system you are using.

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you will need to re - install Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How to connect to the computer as I forgot my password?

  How can I open my files, an old XP computer runing who had a password, I don't have to remenber

  Hi JEN_3,

  Check if this article helps you to:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• How to connect wireless the WRT54GS

  I have a router WRT54GS I want install Wireless with my Windows XP desktop that has only an installed wireless adapter. There is no ethernet on the pc port. I have reviewed the Stickys are and read that FAQ, but still did not find a response stating clearly how to set up the router without using an ethernet cable connected to the pc. I want to be able to access the configuration page based on the web as well for what I can fix my settings. Any help would be greatly appreciated.

  As a general rule, it is best to configure the router using a wired connection to be sure that you set up your router and not someone else... So if you have any wired ethernet device, it is best to use it rather than try a wireless only configuration.

  You can set only through wireless, however, you must ensure that you are connected to your router at the beginning. More simple test would be to unplug your router power and control for available wireless networks. If there is still a "linksys" network to be seen, you must be very careful.

  Anyway, and then reconnect your router to power. Do your research to computer networks and connect to the network not secure "linksys". It is best to put the computer near the router to do this to make sure that you connect to your router.

  Then open the web interface at http://192.168.1.1/ default password should be "admin", no required user name.

  To be sure, it's your router, go to the status page, see that it's really a WRT54GS and check MAC address, that you see here. It must be identical to that printed in the WRT (maybe one or two off the coast in the last digit). If it comes from a completely different MAC address, check local and SubTabs wireless network and MAC addresses there. If all MAC addresses are completely different, unplug the router from the power and see if your computer is always connected to the interface web or not.

  Anyway, once you have established this really is the web interface of the router, check the version of firmware and on the router and that is available online. It is better to update the firmware before doing the configuration. If you have the latest firmware, you must configure the router. I recommend the following steps:

  1. go to the wireless page. Change the SSID to something unique. Save the settings.

  2. you will lose the connection. Redo your computer search for networks. You should now see the new unique SSID. To connect to this network and reopen the web interface.

  3. then set up wireless security. Enable WPA2-Personal with AES encryption and set a strong password. Save the settings. You will lose the connection.

  4. now, you have to reconnect. Depending on your computer and use the software to set up the wireless, you may need to remove the unique SSID firstly in the preferred network list before you can reconnect. Usually, the computer remembers the SSID joined before and does not connect if security settings do not match the one used before. But you should know that.

  5. as you are still using XP the computer may not support WPA2 and AES encryption (which is the best and strongest that you can use today). So, if you're absolutely not able to reconnect to the computer you will need to reset the default router by pressing the reset for 30 seconds button and start over. Then choose personal WPA with TKIP and a strong password. It should work. I would not recommend to use WEP is easily broken.

  6. Once you have successfully set up your desktop to connect to your secure wireless network, you should make a change more: change the password for "admin" on the configuration page "Administration".

  7. don't forget to clean the list of preferred wireless networks, in particular, do not forget to remove the network "linksys" to this list. Otherwise, your computer can automatically connect to a network "linksys" if one comes available nearby.

  This should be it.