How to connect two printers to a network and be able to print wihout turning on their own computers?

Similar Questions

• How to connect two external HARD drive satellite and the same printer?

  Hello

  I have now two laptop Toshiba Equium.
  What is the best way to connect them so that they can access the same external hard drive and the same printer?

  Thank you

  Hello

  I guess the two laptops are in the same network; Home LAN or WLan. Right?
  I this case I recommend you connect HARD drive and printer to one of the portable satellite.

  Then you can share the HARD drive and the printer with other cell phones on the LAN.

  You could add the network permission to others, and in this case the other participants of the network would be able to share the printer and HARD drive.

• How to configure two windows separated from direct mail on the PC user accounts, each with their own password

  The purpose of running two separate is Windows Live Mail accounts to have total privacy on each, avoiding different users can see other accounts or e-mail folders. I don't want to mix the different user accounts when the opening of windows live mail, each user must be able to open his account separately.

  Thxs

  While this was possible with Outlook and Outlook Express identities as this function is not available with Windows Live Mail as detailed here

  Basically, it says to put in place of the separate accounts for each user to connect to Windows to isolate the e-mail accounts in each of the other opinions.

  On the only other option is to use some use webmail ISP provides you instead of Live Mail.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• How to connect two databases to a single listener

  Hello
  
  How to connect two databases to a listener.is it is possible or not

  Hello

  Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

  Example is as follows

  Listener.ora

  SCREW =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
  )
  )

  SID_LIST_VIS =
  (SID_LIST =
  -1 database configuration
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB1) *.
  *)*
  -Database Setup 2
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB2). *
  *)*
  )

  Then restart your listener.

  Kind regards
  Asif Muhammad

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• How to connect two harddiscs in a computer

  I don't know what's going to happen if I connect the

  hOW to connect two harddiscs in a computer

  http://US.yhs4.Search.yahoo.com/YHS/Search?p=How+to+Connect+Two+harddiscs+in+One+Computer&fr=AltaVista&FR2=SFP&iscqry=

  http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+to+connect+two+hard+disks+in+one+computer&oq=how+to+connect+two+harddiscs+in+one+computer&gs_l=hp.1.0.0i13i30.3151.3151.0.7535.1.1.0.0.0.0.224.224.2-1.1.0...0.0...1c.b0ubsyG8v-w&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5b25e3ab4ae8856e&biw=833&bih=548

  UTC/GMT is 17:27 on Wednesday, August 8, 2012

• How to connect two clips?

  Okay, I'm making progress - but I don't know how to connect two or more items.

  Patrick

  Thanks for the reply.

  Could you clarify... Once you've created your content of chronology...

  When you said made it... do you want to say that you pressed the button made above the timeline in order to obtain the best possible overview

  or were you using the go Word to signify that you have exported the content of the timeline to one of the categories under publish + share/computer?

  If you have exported (saved) via Publish + share/computer/and other categories, the export dialog box has a Save In: location. And you will find

  your file exported to this place (you can change to one of your choice for the default location).

  

  If you save the project (.prel) file without exporting, you can find the file of the project in several ways. Means the faster would be to

  Hold the cursor of the mouse on the name of the project (top right of the workspace Expert), and the path to the project file should be revealed to you.

  

  I demo had this to 12 (13 won't get installed until Tuesday). But, same idea 12 or 13.

  Guided tutorials did you use for your excellent results? All or one in particular?

  You can go further with free learning tools and the use of exploration and experimentation.

  The possibilities of creation using Premiere Elements are endless.

  Best wishes

  RTA

• How to connect two databases on two servers

  How to connect two databases on two servers. For example
  a serevr is in India and another in Australia.
  The following example is correct or not
  
  Select A.ID, B.Name [10.50.17.87] .HR. EMP A, [192.168.100.125] .HR. TRANS B
  Where A.ID = B.ID

  You must use a database for this link. The syntax is defined in the reference SQL here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_5005.htm#SQLRF01205

• Oracle how to multiply two columns of different tables and results

  Oracle how to multiply two columns of different tables and get the result in the third column?
  
  I want to multiply all the lines of the quantinty column in the table of quantity with the relevant lines of the table of prices price column and get the result of multiplying in the third column. What should I use procedure trigerr? OR IS IT POSSIBLE HOW TO DO IT PLEASE HELP :D
  
  Edited by: 994229 2013-03-15 12:44

  /* Formatted on 3/15/2013 3:51:08 PM (QP5 v5.185.11230.41888) */
  CREATE TABLE mytable1
  AS
     (SELECT 1 id, 5 VALUE FROM DUAL
      UNION ALL
      SELECT 2, 7 FROM DUAL
      UNION ALL
      SELECT 3, 8 FROM DUAL);
  
  CREATE TABLE mytable2
  AS
     (SELECT 1 id, 4 VALUE FROM DUAL
      UNION ALL
      SELECT 2, 12 FROM DUAL
      UNION ALL
      SELECT 10, 12 FROM DUAL);
  
    SELECT id,
           mytable1.VALUE,
           mytable2.VALUE,
           mytable1.VALUE * mytable2.VALUE product
      FROM mytable1 FULL OUTER JOIN mytable2 USING (id)
  ORDER BY id;
  

  ID     VALUE     VALUE_1     PRODUCT
  1     5     4     20
  2     7     12     84
  3     8
  10          12     
  

• How to connect two network switches Force10 S4810P

  Hello world

  We just bought two S4810P Force10 network switches and we want to install on two adjacent brackets. They will be used to interconnect computing and NAS storage, installed in two baskets serving mainly local connections.

  We intend to use ports QSFP + to connect the two switches, and I have two questions.

  1. hardware configuration: what are the best transceivers and cables to use in this case?

  2. configuration of the software: should we use stacking or virtual link trunking? the information I've read so far does not give me a definitive answer.

  Thank you very much in advance for your help!

  The server room is already has some inside wiring? If so it be a transceiver that will percolate pre-existing cables. There are also some direct attach cables ranging from 0.5 m to 50 m. Here is an example of a cable direct attach: http://dell.to/23huDl7

  the best course of action would be to contact your sales representative and let them know what your needs are. They can get you city for right connection hardware.

  the VLT and stack the two have the same goal of redundancy, but go about it in different methods with different warnings warning for both. In both scenarios, the redundancy is dependent on each device connection linking the two switches. If you do not do this, then it may be better to let the independent switches. Here is a good blog that compares the VLT and stacking.

  http://bit.LY/1J8nI1Y

  I hope this helps.

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• How to connect two wireless laptop to an unsecured internet connection

  me and my friend. We have detected a wireless network of neighborhood, it is able to connect, but I can't

  How to connect wirelessly

  MR. PHILIPPE,

  Make sure you have your wireless card install correctly on your computer. If you have a laptop then you have a wireless card already in the machine.

  That's all need you. Go to start > Control Panel > network connections, here it takes a current wireless connection. If no, you must install you wireless drivers from the manufacturing of the Wireless card in the computer. (Linksys, Netgear ext...)

  Please rate me upward if you find my post helpful. Thank you!

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.