How to control the battery charge when you are connected to the power adapter?

Similar Questions

• How to grant local LAN access when you are connected via a central-site

  I know how to activate the local LAN access in the properties for the client connection, but I don't know how to allow access to the central site

  Central site is a CISCO 1721 with module as well as IOS IPSEC VPN

  tanks for any help

  Hello

  This feature is only supported when you connect to a VPN3K box, its not available for PIX/IOS as a vpn server, allowing it on the client-side custom has no effect when you connect to a server of PIX/IOS.

  THX

  AFAQ

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• How upgrading to creative cloud occurs when you are already a member of Typekit signed?

  Hello everyone. I have a signature for Typekit. When I buy a creative cloud the price I paid is reduced? How upgrading to creative cloud occurs when you are already a member of Typekit signed?

  Thank you

  Hi rogeriovelloso,

  This page explains how your Typekit account can change if you get a subscription to creative cloud:

  o-a-new-creative-cloud-subscription http://help.Typekit.com/Customer/Portal/Articles/529513-Link-an-existing-Typekit-Account-t

  Please let me know if you have any other questions, here or at [email protected]!  Best,

  -liz

  Typekit Support

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• Internet goes when you are connected to wifi

  Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

  It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

  The question...

  When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

  The temporary solution...

  If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

  What I tried...

  Restart the mac repeatedly

  Restarted the router again

  In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

  Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

  Thanks a lot for your help

  Joe

  Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

• Copy-hard drive when you are connected to vCenter

  Y at - it a command to copy a virtual disk when you are connected to the server vCenter instead of being directly connected to each ESX Server?

  Thank you

  KeV

  You can use the cmdlet Copy-DatastoreItem but there are a few known issues with this cmdlet when the current generation.

  Or you can use the underlying CopyDatastoreFile_Task method.

  Note that you need to copy all the files (header & flat file) that make up a vDisk yourself!

  ____________

  Blog: LucD notes

  Twitter: lucd22

• "Change the graphics card" spam message when you are connected to the AC adapter / CC

  Normally, I run my laptop computer Alienware 17 dedicated graphics processor NVIDIA with integrated graphics off. However, I've recently been submerged do with the following message will be displayed that plugged my AC adapter: "switch of graphics card. "For the life of optimal dough, press Fn + F5 to switch to the integrated graphics card (a system Reboot is required).

  I noticed this a couple of days, because as soon as I plug my adapter by practicing a game (for example, the Lord of the Rings Online) my fps drops dramatically. I realized that if I tap ctrl + alt + delete as the above message keeps popping up. If I close the message in a new guard burst until I have unplug the power adapter.

  To my knowledge, it is normal that the message appears when the plug/unplug the power adapter for the first time, but I can't understand why it is me spamming with this message even after I close it at the start. I tried to update my NVIDIA graphics card, have changed again my computer of the discrete graphics integrated graphics and back to the integrated graphics card, have made sure that NVIDIA is selected as my discrete graphics and have updated my BIOS. None of them help.

  If anyone knows what's going on or if there is a way to disable this notification, I would really appreciate it!

  PS My power adapter works fine (it is not loose or damaged) and I ran diagnosis at startup which showed all systems running 100%.

  After much further research, I was able to find a way to disable the notification.

  Windows + R, type msconfig, then click on the Startup tab to open the Task Manager and disable the display on-screen Alienware. Restart the computer, and the popup no longer appears.

• How to cancel Adobe Creative cloud when you are blocked for a year after the first month and you need to pay 50% of the cost? Outregous!

  So bad that I couldn't cancel my subscription. A very big family problem is forcing me to cancel all my subscriptions, among them creative cloud. When you try to do, I learn I'm stuck unless I pay 50% of the cost of the remaining months. I am therefore be punished for having financial problems. The nice guy helped me with two months free, but the thing is 50%. You ever thing about future problems when you accept contracts like that. And they simply don't care. Adobe is so amazing, but so rigid. This is me.

  Hi Mario,.

  Please consult the General conditions of subscription as below:

  Adobe - General conditions of subscription

  The cancellation, have referred the help below document:

  Cancel your membership creative cloud

  You will need to contact customer service for cancellation requests.

  Kind regards

  Sheena

• Get an error 'internet service has stopped working"when you are connected to the internet

  * Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain

  My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is

  Hello

  1. which browser is installed on the computer?

  2. What is the full error message?

  3 is this a wired or wireless?

  4. that all the troubleshooting steps have done?

  5 have have there been recent changes made on the computer before the show?

  I suggest you follow the methods provided below and update us with the results.

  Note: If you are using internet explorer, follow the methods provided.

   

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the article and check.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• WLAN speed when you are connected to the internet

  I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is.

  I connect to the internet via ADSL.

  Both computers are connected to the router, we have a connection cable, other is connected wireless.

  If I'm not connected to the internet, I can transfer files between them through 1.5MB/s-2MB/s. But, if I'm connected to the internet, the speed drops to 100 KB/s - 200 KB/s. My adsl connection has a bandwidth of 1 Mbps (about 128 KB/s).

  Has anyone faced similar problem? No idea what to do?

  You said that you receive the Internet wireless at 100-200 Kbps (kilobytes per second), but I guess you're saying 100 to 200 Kbps (kilobits per second).  If you actually get 100 to 200 Kbps, so it is faster than your reported 1 Mbps line speed.

  A wireless connection is more important than a wired connection.  If most users, when connected wireless, get only about 50% to 70% of their wire speed.  So I'm expecting a 1 Mbit/s connected to the Internet, you should be able to get 500 to 700 kbps (kilobits per second) = approximately 50 to 70 Kbps (kilobytes per second) when connected wireless.

  When you file transfer from computer to computer on your local network, your speed is limited by 54 Mbps Wireless g your connection speed, which can provide a data rate up to 20 to 25 Mbit/s.  It is clearly much faster that your 1 Mbit/s to the Internet can provide data.  So that explains why the transfer of files on your local network is much faster than your wireless Internet connection.

  So, the only real problem I see is that your speed of your WAN (Internet) port to the wireless local area network computer seems to be slow.  The most common cause of this problem, is the default to reset the router by default after a firmware update.

  If you did not reset to the factory settings since the last update of the firmware, please do it now and see if it solves your problem.  After the reset, you must configure the router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• What is the setting on a laptop to be able to close the cover when you are connected to a monitor?

  After a catastrophic situation on my laptop, I got the disc re formatted and reloaded a new operating system.

  I'm trying to rebuild.

  Previously, I had the configuration of the laptop so that when I closed the lid, it remained running so I can use my external monitor.

  Now when I close the lid, the laptop switches mode pause.

  I know there is a place to set up, but I'm not.

  Thank you

  Jack

  This requires that you are under W7.

  Go to "Control Panel" and find "Power Options."

  In the left column, find "closing the cover to choose."

  You will find what you need there.

• El capitan crashes when you are connected to the internet ONLY

  If not connected to the internet, the computer will run all day without any problem, any help would be great, thanks

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.