How to control the fan on Portege Z830?

I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.

So my question is how can I set the fan to work my way?

There are not many options to control the fan.

The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.

As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
This should help a little...

In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
It worked.

Tags: Toshiba

Similar Questions

  • How to control the speed of the fan on Satellite A660 - 11 M?

    Please any body know how to control the fan speed its always of 69% and making bad noise and the cpu use is 3% no to treatment high I try avancΘs power but still runing high speed

    Advanced power settings go to Toshiba power Saver saver > cooling method. There are minimum level. Change back to your power management for a second power plan, and the fan must be much quieter.

    I did it on my Satellite A660.
    Before changing PC Toshiba, health monitor showed CPU temperature 41% and the speed of the fan was 67%. After changing the method of cooling fan speed is 0%.

  • Satellite P100 - 400 PSPA6A: How can I control the fan speed manually

    Good evening

    I would like to know how can I manually control the speed of the fan?
    I ask this question because my laptop rarely use the fan at a higher speed.

    Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
    I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)

    Kind regards.

    Hello

    I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.

    If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.

    If you are using Vista, then you should check the Vista Power Options:
    Check this thread how to manage Windows Vista power management features
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

    But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.

  • Satellite M100 with Debian - how to control the power and the cooling fan on

    Hey,.

    I M100 and I installed debian, works very well, but there is a problem.
    Cooling fan turns on the top speed of all time. I m not shy on unix.
    How can I control cooling fan?
    How to control the power to the laptop?

    Hi mate,

    have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

    See you soon

  • How can I change or control the fan speeds up my computer?

    my processor and motherboard run hot. the fan for processor speed is 20%, the other two are 30%. How to increase the fan speed to lower the temperature?

    I would not try to change the speed of the CPU fan. Clean the case out if its full of dust (if it's a desktop computer). If you can put more fans in the case, put more fans in it

  • Satellite C660D - software to control the fan speed?

    Just brought a C660D. Someone knows the software to control the fan speed?

    My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

    If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

    Hi Polaralbatross,

    Have you ever tried the Eco mode that uses the cooling battery optimized method?

  • Satellite A200-1SC: which tool controls the fan?

    Hello

    I'm looking for a program that I can control the fan speed. Because my fan turns on all 10 dry:(sans charge cpu!)

    Or someone has a Bios more elders where the fan runs slower? My bios version is 1.70

    Hello

    I use the FanSpeed on my laptop Toshiba-No.
    But I don't think it will work on your A200.
    The fan table that is stored in the BIOS controls modules cooling and, therefore, it s unlikely that this tool is running.

  • Satellite L300 - how to clean the fan?

    Laptop seems to be overheating, but I do not know how to clean the fan or the weather, I can. Can you help me please xx

    Hi cottagecrafts,

    [HERE | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40] she s describes how to clean a Toshiba laptop cooling system.

  • How to control the output voltage?

    Good time after some time can get the output voltage, but this value is alwayscontinuous. How to control the voltage output through a Boolean? In

    in order to get this tension when I want to.

    Greetings.
    Hugo Santos

    Hi Hugo,.

    If you use a LabVIEW project, you must set the time of sampling in the properties of the node (see SamplingInterval.png). But this time to refresh the data should be high enough. If you take into account this update of time trying to control your way out.

    Kind regards

  • How to clean the fan / vent of the HP dv6?

    I searched on google and youtube, but videos and instructions I see only explains how to replace the fan.

    In addition, the forums here have no response

    Then...

    How to clean fan vents and air of the HP dv6

    I was shocked to see how much I have in my fan using a walk by torchlight in the dust. But unlike my old laptop where u just have to remove 1 or 2 pieces of the laptop, I see no way to get cleaned fan or even ventilation grids clean this HP dv6-4000!

    How you actually do it? You actually disassemble the laptop? my computer is less than 3 years guarantee n taking apart = void the warranty. =

    Hello

    1. Air to compress in the RCA would not damage the fan
    2. I don't think that clean the laptop while it is up and running is a good idea.

    Kind regards.

  • x 61: how to access the fan for cleaning?

    Lately, I have a humming noise after an hour or two of my x 61 (7675-CTO), some have suggested to clean the fan.

    Question: How to access the fan? I have the manual from lenovo, he speaks of various regions, such as the keyboard, dimm, HD, but not opening fan? Your help step by step will be appreciated.

    In addition, what is the best way to clean the fan?

    Any reference to the video will be great. Thank you.

    take off the keyboard and you can clean the fan blades, but if you need Strip fan apart, you will need to disassemble the entire assembly.

    Buzz can mean that your fan needs to be replaced, if that's the case, then I would say that you extend the warranty on the laptop (you can buy post warranty on certain models of x 61, so you must call Lenovo customer service).

  • How to control the ws appeal period

    Hi Experts,

    I use bpm12.1.3, when the process web service using the service task, how to control the delay?

    Best regards

    Hi user,

    There is a nice blog on wait times. It's about 11g, but it also applies to 12 c.

    https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

    Antonis

  • How to replace the fan on a hp mini 110-3002sg

    is there a video how to replace the fan?

    Thanks in advance

    Johann

    Hi, Johann:

    There is only a maintenance manual.  Please see Chapter 4.

    http://h10032.www1.HP.com/CTG/manual/c02481106.PDF

    Paul

  • How to control the movement of the oam in muse & just play once the proposal?

    How to control the movement of the oam in muse & just play once the proposal?

    This must be configured during the creation of the oam, no Muse, but the animated application you use.

    Thank you

    Sanjit

  • How to control the length of the field... ?

    Hi all


    All by providing payment details in the payment.jsp... If we use a credit card which has 16 digits then, how to control the ground to allow the entry of 16 digits only... ?


    Thank you
    Vishnu

    Write javascript to enter only numbers and set the "16" size = attribute to limit the size to 16 digits.

    JavaScript can be like that of google.

    function isNumberKey (evt) {}
    charCode var = (evt.which)? evt.which: event.keyCode
    If (charCode > 31 & (character code < 48="" ||="" charcode=""> 57))
    Returns false;

    Returns true;
    }

    -Kiss

Maybe you are looking for