How to convert .vi .exe with the student LabView version

Similar Questions

• On Windows 7, how to convert a file with the file Type of "OST" to a file Type of 'PST '?

  I have an old Outlook on a computer file before I want to be able to read about this new computer Win7.

  I could be wrong and certainly can be corrected, but...

  United are a few highlights of what is contained on the Exchange server where this account has been set up.

  Maybe it was a corporate email account that you have taken with you when you left or found in an old backup?
  If so, there are legalities involved and I would not advise to play with the file.

  If they are legitimate emails, free and clear - so maybe the account is still active and you can set up the account and re-download the messages.
  Otherwise, there are several (very expensive) programs that will convert him, about $600 if my memory is.

  Sorry, probably NOT the answer you were hoping for.

  VP Tech Services

• How to convert a video with Playmemories Home (latest version 3.03)

  Hello

  I have a Camcorder HDR-CX580V to work.

  I am running W7 64 bit.

  I installed everything first LIte version by following the instructions manual (the camera was always plugged USB).

  I have couple of movies (mpeg/m2ts) to a different resolution (HD and STD)

  With the version lite, I see that editing/conversion, I have the WMV and MPEG-2 conversion option.

  But I can not used (they are light gray shade).

  So I decided to upgrade to the full version.

  After the upgrade, the only format conversion option I have is MP4?

  I don't have a choice of MPEG-2?

  Then, when I try tho convert with the only choice (MP4) and the abandonment of the process of conversion after 1 second.

  After a lot of waste hours trying to understand and find information about the problem (interference of codecs), I decided to install on another computer same PMH result.

  The camera at home and try the installation process on my personal computer.

  Always have the only choice of codec MP4 but this time I managed to convert the m2ts/mpeg file to mp4.

  But I'm still confuse the process.

  I had a registered STD (720 x 480) mpeg movie and once converted mp4 it's now stretche (ugly) 1920 x 1080.

  No idea why it doesn't work and why I am so limited in the conversion option?

  Should I buy third-party converter/dvd burner?

  Thank you

  I have the same problem. When I try to convert mpeg files (saved in this format by my camera DCR-SR35), after a short time, I get an error message saying that the conversion to mp4 can be due to an error. other formats are not present as an option.

• How to convert dvd win7 with the ISO on my office installation files so that I can again use the iso file to make an installation key bootable win for my net book which has no dvd player.

  I bought a proffessional win7 genuine dvd of microsoft I received today. the dvd has no iso file but only installation files. I need to install win 7 on my dell inspiron mini 1018 10 net accounting that only has usb ports and no dvd support. So I want to use a microsoft tool (if it is possible to avoid 3rd party tools) and firstly convert the files in the bootable dvd into an iso file on my desktop which has the dvd player. so I want to use the iso file and use the windows download dvd tool from microsoft to make a bootable USB key and use it to install win 7 on my netbook usb ports. I need urgent links to the microsoft tool if it is available or any reliable free tool to convert DVDs to iso. Help, please

  You can use iSO recorder:

  ISO Recorder v3

• my audio syestem of beats went when I choose windows 8, how can I return it with the full version?

  my audio syestem of beats went when I choose windows 8, how can I return it with the full version? I have hp pavilion dv4 5110tx

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59882.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8.

  After reinstalling, restart the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again before checking if the Beats Audio is now listed in the windows control panel.

  Kind regards

  DP - K

• How to convert a slideshow created in an earlier version of items so that I can play with items 14

  How to convert a slideshow created in an earlier version of items so that I can play in 14 elements

  mijahar wrote:

  How to convert a slideshow created in an earlier version of items so that I can play in 14 elements

  The new slide show feature is not compatible with older versions. You can play the videos that result or PDF files, but you can use or update your old projects. I'm afraid you will have to keep the old version of elements as well as the other.

• How to convert a PDF with handwritten signature?

  How to convert a PDF with handwritten signature?

  Hi Lotus1215,

  Once the document is signed this document, we can edit, where the conversion is not possible

  Please see the article mentioned below

  http://forums.Adobe.com/docs/doc-1515

  I would like to know if you have any further questions.

  Kind regards

  ~ Dominique

• How to remove a step with the polygon Lasso tool

  How to remove a step with the polygon Lasso tool

  In PS, all you have to do is to hit the DELETE key and you can go back a little with the polygon Lasso tool. How to accomplish this in Fireworks?

  Another option that gives you a lot of control is to use the tool pen instead of the polygon lasso. Because it's a vector path, you can refine the outline very easily using the tools of feather and Subselects and when you are satisfied with the result, click on modify > convert a path to the top. You can even choose to keep or delete the vector path in the preferences panel.

  HTH

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• How can I sync lightning with the iphone calendar?

  How can I sync lightning with the iphone calendar? I saw online that I need to use a google calendar? I added google calendar as they described, but I have no idea where from here

  To synchronize with the iPhone (also known as iCalendar) schedule you must use a calendar based on a cloud. If you already have the lightning, install the addon Google provider and Setup Google Calendar. If you have already done so, go to settings on your iPhone. In the e-mail box, Contacts and calendars, add your Google account and turn on the calendar. This will synchronize your Google Calendar with the iPhone.

• How to install firefox last with the custom network home page

  I'm trying to figure out how to do a network with the latest firefox installation, but suitable for the bringing into default homepage for the intranet portal of companies. I have several thousand computers that require installation and pushing by network is the only realistic method, but I can't find a solution on how to change the homepage for this. Help, please!

  See:

  • http://Mike.kaply.com/2012/08/29/setting-the-default-Firefox-homepage-with-AutoConfig/
  • https://addons.Mozilla.org/firefox/addon/CCK/

• How to drag a desktop with the magic trackpad icon?

  How to drag a desktop with the magic trackpad icon? It is coupled with a Mac Mini El Capitan 10.11.4 running.

  Thank you.

  Place the cursor on the icon then press on and hold and drag your finger across the surface of the touchpad.

  If problem, then check your trackpad preferences.

  Note also you maybe isn't able to move them they will break again) if other that None is selected in the sort by if you hold with two fingers and choose

• How to take a photo with the Acer Iconia W 4 820

  Hello

  Anyone know how to take a photo with the Acer Iconia W4 820 Tablet and get it back on my pc?

  hans0919

  Easiest is to copy the files with a USB key, but the most elegant (IMHO) is across the network. Just join each machine to your homegroup, and you can copy back.

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p