How to copy the recovery on the new HARD drive partition, HARD drive failed?

Similar Questions

• How to add the new hard drive RAID 5 on

  I have Dell Powerdege 2900 server and I need to merge the new hard drive in a RAID 5

  Hi Sabry75

  If you have open Manage Server Administrator installed, you can do the merge from there. It's rebuild.

  You can refer to the guide to using OMSA below, look under the virtual disks of re-engineering/migration: -.

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Let us know how it goes.

• How to install the new hard drive on PowerMac G5

  How it installs a new hard drive on PowerMac G5?

  I have a number of readers of the previous Mac that can fit in this PowerMac G5, but I don't know what - if anything - is necessary to make them fit. Or guides, assistance would be appreciated.  Thank you!

  You need a 3.5-inch SATA drive. Concerning how to swap the drives you can use these instructions to fixit. You can skip step 4 that this plastic cover does not need to be removed. https://www.iFixit.com/Guide/Power+Mac+G5+hard+drive+replacement/1952

• Two hard disk drives, how to remove the new E drive in XP?

  My XP system crashed and I reinstalled the Windows XP operating system and I have now 2 hard drives, the original C with 76 GB of space and the new E with only 2.5 GB of space and I get a message that says that my disk space is insufficient, and I can download is nothing more nor can I use the system restore because it says that there is not enough disk space.  How can I get rid of this new drive E and keep my old C drive?

  You told us that if you try to install with a CD or a restore partition by pressing an F key?

  The product key sticker is on the side of the hard drive?  It's a bit a strange place for the Windows product key sticker, this sticker is usually outside the computer.  You really need to make sure that you have the product key, otherwise you will not be able to install Windows!  The product key is made up of five series alphanumeric each containing 5 digits or characters in this format: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX.

  I can only emphasise this point, you better, make sure you have the right key, otherwise you will be up the proverbial Creek without a paddle!  If you can still start the old installation of Windows, I suggest strongly that do you use ProductKey of Nirsoft to retrieve and check the key used for installation, ProductKey is available here: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  How many hard drives you have installed in the computer?  If you have only one disc, and if you use a CD for installation, then when you get to the selection screen of disc and partition delete all partitions on the disk and then create a new partition using all available space on the drive and format it NTFS.  Once you do that and before you start Windows Setup, restart the computer with the CD and then install Windows on the new partition, this restart after you delete and recreate partitions avoids assignments of unexpected drive letter by the installation program.  It goes without saying that all data on the disk will be lost when you delete the existing partitions, and then create a new.

  When you install Windows make sure that only the keyboard, mouse and monitor is connected to the computer, disconnect all other devices such as external hard drives, printers, flash drives, etc.

  John

• How to install the new hard drive and windows key?

  Hello

  I have a aspire v5-121-c72g32nkk.
  I have just updated to Windows 10, don't panic, but I want to upgrade my HD drive to a SSD drive.

  You can find the steps to do this?
  Windows was preinstalled, how I reinstall on another drive?
  I have no serial key or whatever it is.
  I'm a bit lost, you have an idea?

  Best,

  There are several ways to do this, anyone have product keys, since

  If you want to do a clean install:

  Windows 7-8 - 8.1 keys are embeeded on your BIOS

  Windows 10 use a generic key during the upgrade, so just skip the steps questions about a product key and the first time you connect on the web, it will authenticate to.

  You must decide:

  (1) do a clean install of your operating system to factory

  (2) make a disk - image of the system image and reload

  (3) to do a clean install of windows 10

  option 2 is the fastest at the end, as you create a copy of your HARD drive and reload it to your PC.

  you need a bootable windows 10 (USB or DVD) media and little space on external HARD drive.

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Followed my previous inquiry, my hard drive crashed and lost my copy of Acropbat 9 in installing the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.

  If your number of activations exceeds max (2), then you will need to contact customer service.

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Install the new hard drive - how to proceed?

  My hard drive has bad sectors which (according to Spinrite) is not repairable.  I also ran all the HP utilities who tell me that the hard drive needs to be replaced.  So, I bought a new one that is the same size and the brand as what exists currently in my laptop.

  Laptop is HDX16 that came with Vista.  I upgraded to Win7 before realizing that my Imaging backups were a failure due to bad sectors.  The last good picture I have with Shadow Protect is the system with Vista and is now 3 weeks old.  Meanwhile, I use Norton Security backup feature to back up all my files on a daily basis.   I noticed yesterday that Win7 has a built-in backup feature imagery so decided to see if she would complete successfully and he did.  So now, I have a picture of the Win7 installation as well.

  I did system recovery disks for my laptop.  If I read information of HP correctly, when I run the restore, it will automatically create the partitions C & D on the new drive, install the recovery disk D environment and continues to run since that installation of Vista hard disk?  If so, once the operating system is running on the hard drive again, I think I can then move to Win7 yet and then use the recovery feature to copy the image, I made yesterday to the laptop.  Is this correct?  Am I missing something?

  Otherwise, my other option would be to run the recovery discs, then use the Shadow protect recovery disks to copy the old image of 3 weeks, then switch to Win7 again and somehow find all the files I have created/changed over the last 3 weeks I want to keep and they copy to the laptop?

  Any suggestions appreciated because this is the first time I installed a new hard drive.

  Thank you.

  JO Anne

  Hello

  It may be faster to simply restore the image of Windows 7 that you have created the new hard - to do this, you'll need to the Image and a Windows 7 repair CD (you should have been prompted to do this after you have created the Image of the system).  The link below is a guide detailing how to restore an Image of Windows 7 on a new hard drive.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

  Kind regards

  DP - K

• Equium A200: impossible to get Vista installed on the new HARD drive recovery

  Hello

  After a failure of the HD I bought a Toshiba no AF HD which is defective
  Now that I had to buy a replacement HARD drive that is a player of AF but no matter how hard I try, I can't recovery Vista Home Premium software to install

  I get an error "Windows cannot configure Windows" or something like this message.

  Pointers would be most useful.

  Thank you, Tim.

  Usually, is not a big problem to install the Toshiba Vista image using the new HARD disk.
  But I've already read in different threads that in the case of much larger hard drives the recovery procedure could not complete successfully.

  In which case you would not be able to complete the Vista installation by using the recovery disk, you can try to install the system using the Microsoft disc. In this case I recommend you take the Win 7 OS. Its much better than Vista OS.

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

• Re: Satellite C50D-A-11 q - how to get key WIn8 and use it on the new HARD drive?

  Hello

  hard drive died in my laptop. How do I get my key Windows 8 so I can install the new hard drive?

  Thanks in advance

  Stuart
  nessydoo

  Unable to get the key separated from Toshiba, but only the Toshiba recovery disc.

  If you have not created the Toshiba recovery disc in the past, then you will need to order this disc from here: http://backupmedia.toshiba.eu/landing.aspx

  The disc contains the image. Image is a package that contains the (already activated) Windows system and all Toshiba drivers and tools.

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• How to install Windows 7 on the new hard drive?

  I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

  1. how to install Windows 7 on a new hard drive?

  2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

  either way, this is my laptop spec (for reference); -

  

  * Note *.
  I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

  I hope someone will help me answer my question,
  Thank you

  I found the solution.

  Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

  Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

  or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

• Pavilion 15 - p002: HP Pavilion 15-p002 minimized Image Recovery on the new HARD drive. Is this possible?

  The original crashed the HDD on HP Pavilion 15 - p002 and I got a new HARD drive. Because I don't have a copy of the installation disc Windows 8.1 I wonder if execution of Image reduced on the new HARD drive recovery is possible. Help, please.

  Try this link:

  http://support.HP.com/us-en/document/bph07143

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.