How to create a Boolean value when it is activated, it is an iteration and then off the back

Similar Questions

• When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there.

  Original title: need help with wordpad problem

  When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?

  Hello

  ·         What happens if you use another application to preview before printing?

  ·         You are able to print the document correctly, or you receive no error message when printing?

  You try to use Microsoft Word or Notepad to check if you face the same problem.

  First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.

  If Yes, then the problem is the document.

  You may need to clear any formatting, that depends on where you copied from.

  Your rule of printer drivers print preview

• How to prevent my Mac of disconnection after that I connected remotely from iPhone and then left the iPhone app?

  I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the business of the connection, and then exit the application, the remote Mac began a disconnection. He also started doing this when I connect from my first Mac via screen sharing. It is a relatively recent behavior. Someone has an idea what setting I have (inadvertently) enabled to prevent the computer from automatically disconnect when the 'access app' is no longer active on the remote device?

  Go to System Preferences > energy saving > computer sleep > drag it FOREVER to prevent disconnection of your mac.

  Think simple.

• How to recover emails on my hard drive once I deleted my email account and then added the account back?

  I find the e-mail in windows live and use xp

  If you click on tools > Options > advanced > maintenance > store folder, you should see where WLM is keeping sound files using now.  Navigate to this folder and then go up from there and after a few clicks you should see another folder that will contain the previous files, if they exist.  If you see any other folder, then they probably disappeared.

• How to create new Admin id when the current administrator id is corrupted - Vista

  My id admin does not load. Error is the user profile Service service can not... (I forget the rest).  No administrator ID exists so I can connect to my computer with this id, but can't do much except run the existing software.

  Is it possible to bypass the existing admin id permissions to create a new admin user account id?

  I don't know what to do to avoid buying a new computer and start all over again.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  and you don't have to buy a new computer

  If necessary reinstall vista on your computer

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder."

  original title: renaming a folder

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Only time that happens, in my limited, knowledge is... If you use a 'illegal' name, such as ":" symbol. There are symbols, that you cannot use as part of a name. When this happens, you should get a warning indicating that the name is not allowed, something to that effect. Then he returns itself back to the new folder.
  Suggest you try again with conventional names. See if it works or not.

  t-4-2

• I would change a few pdf, I created. I downloaded (acrobatproDC_00000000000000000000000409.exe) and then did the installation. but when I opened one of my docs, the Edit option not there. What have I done wrong

  I would change a few pdf, I created. I downloaded (acrobatproDC_00000000000000000000000409.exe) and then did the installation. but when I opened one of my docs, the Edit option not there. What have I done wrong

  Uninstall what you have downloaded.

  If windows, clean it by Download Adobe Reader and Acrobat tool - Adobe Labs

  Reinstall the correct version for which you are authorized to use another browser.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.6.1. 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• How clone a HARD drive and then use the clone with VMware (as well as Windows works!)?

  I have a system where Windows 7 is installed, and I'm doing a clone of her image of HARD drive, I then want to use in my main with VMware PC, so that I can start Windows 7 at the cloned disk.

  I used Ultimate Boot CD v5.1.1 with which HDD I wanted to clone, and I cloned using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HARD drive was 250 GB in size which had 3 partitions, while the USB HDD I have attached to the system, which was supposed to be the disk of destination/clone, was 320 GB in size. I chose to create a replica, exact and up to 250 GB of data (partitions, etc.) has been copied exactly, and the rest of space was not allocated. I have now connected this USB HDD to my main PC, shot to the top of VMware Workstation 8 and defined a new Virtual Machine and chose to boot from the USB HDD.

  The result is that when Windows starts (from the cloned HDD inside VMware), I get the blue screen error until I get to the login screen.

  How can I change my methodology so that Windows starts even on the clone? I can change the tools I use, etc.

  You can use the usb drive is
  you only need to patch the system a little registry
  to do this, you start the virtual machine with the usb drive in a restore win7 CD, and then follow the instructions I posted here
  http://sanbarrow.com/p2v2008r2.html

  Patching - easy Variant

  This procedure is used when otherwise the VM would start in a kind of bluescreen 7B.
  This means that VMware is the target and that you configure the computer virtual with VirtualHardware type 7.
  It applies only if the virtual disk is configured like this
  scsi0.virtualDev = "lsisas1068".
  scsi0:0. FileName = "imported.vmdk".

  On the platform target start the virtual machine, newly created in the Windows 7 recovery CD.
  After the initialization is complete, click CMD and run regedit.
  Select HKLM, then Menu > file > load hive.
  Navigate to the Windows directory on the virtualdisk > system32\config and select the file SYSTEM.
  When asked for a name enter p2v.
  Then find the key

  HKLM\p2v\ControlSet001\services\LSI_SAS

  and the startup type of the REG_DWORD value 0
  Select HKLM\p2v, and then click Menu > file > unload hive.
  You can now close regedit and restart.
  The next time you start, you can start in the 2008 R2 system. He should find the drivers and probably need to reboot when finished.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Several times (not all the time) when I disconnect my lap top and then plug it back, the computer crashes and I have to restart manually.

  I called Dell a few weeks ago.  They had me remove the battery, press the power button 15 X and then restart.  They did a scan of material and said that everything was going well.  I ran once again virus scan software, and there is no virus.  I deleted all temporary files.  They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only.  Do I have other options as to how can I fix?  This is a NEW computer that I just received in August!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
  drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Is it possible to access AMX element using the AMS item ID and then update the value of the AMX?

  I created a prototype - where I need to create a static Page AMX element. I have a bean that will have a method of UPDATING: the user interaction with the element AMX fires this UPDATE method, and the method will determine the value of another node AMX. The example is as follows

  <? XML version = "1.0" encoding = "UTF-8"? >

  "< amx:view xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "Header-XXX" id = "ot1" / >

  < / amx:facet >

  "< amx:selectOneChoice label = '1' id = 'soc1" value = ""valueChangeListener ="#{SolverLogic.Update1}" > "

  "< amx:selectItem label =" "id ="si667803"value ="-1"/ >"

  < amx:selectItem label = 'O1' id = 'si667804' value="667800.667803.667804"/ >

  < amx:selectItem label = "O2" id = "si667805" value="667800.667803.667805"/ >

  < amx:selectItem label = "O3" id = "si667806" value="667800.667803.667806"/ >

  < / amx:selectOneChoice >

  "< amx:selectOneChoice label ="2"id ="soc753865"value =" ">."

  "< amx:selectItem label =" "id ="si2"value ="-1"/ >"

  < amx:selectItem label = "Ø21" id = "si753866" value="667800.753865.753866"/ >

  < amx:selectItem label = "Ø22" id = "si753867" value="667800.753865.753867"/ >

  < amx:selectItem label = "O23" id = "si753868" value="667800.753865.753868"/ >

  < / amx:selectOneChoice >

  < / amx:panelPage >

  < / amx:view >

  When the user selects 'O1' - 'SolverLogic.Update1' bean - will calculate 'Ø21' must be selected. Is there a way to access the node AMX 'amx:selectOneChoice label is '2' ' - using the ID - id = "soc753865" sound, and then set the value as "value = 'Ø21' '"

  My requirement is that I don't need a DataController object, I have a binary file that contains the business logic, what I need is to create a static page and then use business logic to determine the result of user interaction and then update the user interface accordingly.

  Thank you

  Shailendra

  There is no label but value.

  You must have the below for the value of selectonechoice:

• a vertical scrolling page to page is reloading - when I click on the menu, it scrolls, and then reload the page. boring

  I created a page a Web site with vertical scrolling and anchor points.  When I click on the menu item, it scrolls, and then reload the page.  How can I stop this action?   I want just a smooth roll to anchor and do not reload each time.

  TIA

  This is not normal. Sounds like something that is triggered by the custom code added to the HTML page or by a third party widget, but it's totally impossible to say without the URL of the page.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.