How to create a date for the restoration of the system when there is no previous restore date.

Similar Questions

• How to create an ERD for the vista sp2 x 64?

  How to create an ERD for the vista sp2 x 64?

  How to create an ERD for the vista sp2 x 64?

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  Make sure you get the 64 bit version.

  See you soon. Mick Murphy - Microsoft partner

• How to create a password for the user account for my child?

  How to create a password for the user account for my child?

  You can create the user with the parental control account. This will act as a protection for the child's account.

  You can take a look at the following links on setting up parental controls:

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  http://Windows.Microsoft.com/en-us/Windows/set-parental-controls#1TC=Windows-7

  http://www.howtogeek.com/HOWTO/10524/how-to-use-parental-controls-in-Windows-7/

• How to create a password for the pdf file

  The Adore Acrobat XI, how to create a password for the file? Aid says going to the Tools Menu and clicking on the Protection tab - but there is no option. In the security file - properties - screen, it shows the security details but doesn't allow for no change.

  I think you can be mixing two different products: (free) Adobe Reader and Acrobat ($$).

• How to create a function for the function date two

  Hai All
  
  How can we create a function for the date function two and to return the number of hours between two dates
  
  For example
  
  1 January 2010 0815' - '01-jan-2010 1715' and I need to calculate the time between two dates
  
  How can I create a procedure
  
  Thanks I advance
  
  Srikkanth.M

  What have you tried?

  Here is an example (untested):

  CREATE OR REPLACE FUNCTION RETURN_HOURS
  (
          pDateStart      IN DATE
  ,       pDateEnd        IN DATE
  )
  RETURN NUMBER
  DETERMINISTIC
  AS
  BEGIN
          RETURN (pDateEnd - pDateStart) * 24;
  END RETURN_HOURS;
  

• How to create a list for the tabs 2nd level

  Dear Experts
  
  I created a view

  CREATE OR REPLACE FORCE VIEW  "MY_VW_TABS" ("APPID", "PTTARGET", "PTTABNAME", "PTTABLABEL", "TABNAME", "TABLABEL", "TABPAGE") AS
    select pt.APPLICATION_ID APPID,pt.TAB_TARGET PTTARGET,pt.TAB_NAME PTTABNAME,pt.TAB_LABEL PTTABLABEL,t.TAB_NAME TABNAME,t.TAB_LABEL TABLABEL,t.TAB_PAGE TABPAGE
  from APEX_APPLICATION_PARENT_TABS pt,APEX_APPLICATION_TABS t
  where t.tab_set = pt.TAB_NAME
  and pt.APPLICATION_ID=t.APPLICATION_ID
  order by pt.TAB_NAME,t.TAB_NAME

  I need to create a dynamic list based on this view of the * 2nd level tabs * (of my model of two-level tabs page), to be used in a region bordered on page 0. However, I found that the code in the list should be as follows:

  select level, labelValue label, 
         [targetValue]            target, 
         [is_current]             is_current_list_entry,
         [imageValue]             image, 
         [imageAttributeValue]    image_attribute,
         [imageAltValue]          image_alt_attribute,
         [attribute1]             attribute1,
         [attribute2]             attribute2,
         [attribute3]             attribute3,
         [attribute4]             attribute4,
         [attribute5]             attribute5,
         [attribute6]             attribute6,
         [attribute7]             attribute7,
         [attribute8]             attribute8,
         [attribute9]             attribute9,
         [attribute10]            attribute10
  from ...
  where ...
  order by ...

  Now, I have two questions:
  (1) how to use the view above to be used in the code of dynamic list?
  (2) is a good way to create a list for the tabs 2nd level?
  
  Best regards
  Mahmoud

  Mahmoud

  Are you sure that you view is correct?

  >

   where t.tab_set = pt.TAB_NAME
   
  

  Should be

  where t.tab_set = pt.current_for_tabset
  

  Nicolette

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• How to create a report for the various sets of payroll

  Would like to know the select query which can help me to create a report for a monthly payroll payroll courses in a single pay period.
  We sometimes 1 or 2 payroll run as long as single pay period.
  I want to see all my reports based on a payroll including run how can I do this please?
  
  Help, please!

  SELECT< columns="">
  of pay_payroll_actions App.
  pay_all_payrolls_f women's wear,
  TPP per_time_periods
  where papf.payroll_id = ppa.payroll_id
  and ppa.effective_date between papf.effective_start_date and papf.effective_end_date
  and ppa.action_type IN ('Q', 'R')
  and ptp.payroll_id = papf.payroll_id
  and papf.payroll_name =: pPayrollName
  and ppa.date_earned BETWEEN ptp.start_date AND ptp.end_date
  and: pDate BETWEEN ptp.start_date AND ptp.end_date

  Make a Date and the name of payroll. The query should list all series pay down in the period in which falls the date.

• How to create a model for the State of the column plus four?

  Hello
  
  I want to create a report for a tabular presentation model must have more than 4 conditions of column model (more than 12 conditions I need) to get the coloring for line according to the conditions.
  
  so please tel me how to make a model to meet my needs.
  
  APEX VERSION: 4.2
  Database: 11 GR 2.
  
  
  See you soon
  Tulasi.

  Take a look: http://apex.oracle.com/pls/apex/f?p=54687:41

• How to create a PDF for the approval of the customer?

  Someone of you create PDFs for the approval of your InDesign documents? We must do our work through a system of approval in pdf format and I can't think how to do that with things like frames with scroll and popups.

  Any ideas would be great.

  See you soon

  Graeme

  Bob Levine has posted a cool article on his new blog, which might work well for review the DPS articles:

  http://boblevine.us/creating-a-PDF-from-a-digital-publishing-Suite-app/

• How to create a chart for the exact values in PivotTable

  Hi all
  
  How can I create a graph exactly indicating swivel values. I created a PivotTable and suppress the display of the table. When I create the chart it does not show the graph for the pivot table values.

  to do this, you must modify pivot table properties, and then select chart pivot results tab in the top middle... hope this helps

• How to create a 'category' for the brushes?

  I've collected a ton of different types of paint brushes. To keep all in my active brush Panel seems to slow down Photoshop and my computer, and it is difficult to sort all the when you are looking for a particular brush.

  Is there a way I can create a category for certain types of brushes, as the default categories that appear at the bottom of the context menu brush Panel (calligraphic, false finish brushes...)? An example would be a category for all my brushes of foliage (leaves, grass, Moss, trees, etc.).

  Or is there a better way to keep similar brushes orgainized together and accessible in the PS brush Panel? Thank you

  Hi rich,

  Yes, you can get your brushes to show up in the menu of the Panel under all the built-in brushes. But it is a few steps, follow me.

  Start by creating your predefined. Looks like you already know how to do this, but I'll repeat the steps for someone else.

  Click the create predefined in the Panel forms.

  

  The name of the brush.

  

  Create as many other preset that you like.

  When you have all your brushes. Choose the Preset Manager in the brushes Panel menu.

  

  This opens the preset manager.

  

  Shift + click or Cmd/Ctrl-click to select the brushes you want to have in their own game. Then click on the button Save the value. This opens the dialog box save the value.

  

  This should open in the brushes folder that is located in the Presets for Photoshop. Don't go anywhere else. This is where you want to be.

  Name your game (such as foliage), and then click Save.

  You can now delete these brushes from the preset manager.

  Restart Photoshop.

  Your brushes custom if poster at the bottom of the Panel forms Preset.

  

  At any time, you can choose the brushes. An alert will ask you if you want to replace (throw all your other brushes and insert those custom) or append (add brushes to those you already have). I usually add.

  

  Let us know if that helps.

• How to create a shortcut for the Windows on the desktop community?

  Original title: widdget windows community?

  can I get a widget for the windows community?  I don't know if widdget is the word just sorry, I'd like something for my office (sort of click and go) kind of thing.

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, it seems that you want to create a shortcut to the Windows community on the desktop. Correct me if I misunderstood the question.

  (1) what do you mean by Windows community? Microsoft Community are you referring?

  If so, I suggest you follow the steps to create a shortcut to the site and check out:

  (a) open the Web sites.

  (b) copy the link, right-click on the desktop and select new , and then click shortcut.

  (c) Paste the link in the shortened window then click Next and type a name for the shortcut.

  (d) click Finish.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• How to create a script for the name of the channel to take and insert text on profile in CS5

  I am a silkscreen and I print my Photoshop starts. I regularly work with multi channel files or RGB files with additional color channels. I created actions to place check marks, resize images, etc. to be ready to print manually but I create for each display text labels, if they are absent from the original work.

  
  

  The files I work with have named pipes as "basic white, red, green, blue 284" etc. which indicates the color of the ink. I want to be able to do is create a script that copies the text of the channel name and insert it into a separate or each/all channels to the top of the file, so that when I print every positive there is a label corresponding to the color of the ink.

  
  

  I don't know if this is even possible, and I am limited in my knowledge when it comes stock and no experience with scripting and have had pretty good luck in the past for actions to do what I want without unnecessary steps.

  
  

  On my target action registration, it creates a new channel with each individual reg mark then combined in a separate channel in which I just copy the contents and select all channels of ink and fill with black to make them appear, I am happy with the steps that must be that it is not too complicated and if it could do the same with labels I would be happy with that.

  
  

  Thanks in advance!

  Something like that?

  // the color used for the text
  var black = new SolidColor();
  black.rgb.hexValue = '000000';
  // set this to space the labels
  var horizontalOffest = new UnitValue(20,'pt');
  var doc = app.activeDocument;
  var currentLayer = doc.activeLayer;
  var textLayer = doc.artLayers.add();
  textLayer.kind = LayerKind.TEXT;
  // font requires the postscript name of the font
  textLayer.font = "ArialMT";
  textLayer.textItem.size = new UnitValue(9,'pt');
  textLayer.textItem.justification = Justification.RIGHT;
  // set the position for the text. this sets to top right corner of the channel
  // here it is set so the text baseline ends  40pts from the right edge, 15pts down
  textLayer.textItem.position = [new UnitValue(doc.width.as('pt')-50,'pt'),new UnitValue(15,'pt')];
  textLayer.textItem.contents = 'label';// temp label string
  
  for(var channelIndex = 0; channelIndex