How to create a default profile for all users of a computer under Windows 7/Vista for Firefox versions greater than 8? I would that all new users on a computer to get the same values by default, homepage, bookmarks, etc...

I found some help on older versions of Firefox, but I can't seem to find anything for the latest versions greater than 8. There must be a way to do this for imaging large scale.

Have you created a defaults\profile in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\)?

All files in this folder will be moved into each newly created profile folder.

To give the prefs a default, it is best to do this via a mozilla.cfg file.

Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift

See:

You can use these functions in mozilla.cfg:

defaultPref();  // set new default value
pref();         // set pref, but allow changes in current session
lockPref();     // lock pref, disallow changes

Tags: Firefox

Similar Questions

  • When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

    When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

    Hello

    Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
    Ask problems known in their forums. You may also check those similar
    resources on the site of the manufacturer of the actual device (for the original drive).

    =================================================================

    It is not surprising that the same issue affects the old and the new drive.

    This problem may be caused by the presence of too many CD/DVD programs competing for resources,
    especially by these programs that run at startup.

    Even if the error is not Code 22 check these:

    Code 22
    http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

    How to fix the Code 22 errors
    http://pcsupport.about.com/od/errorc/a/code-22-error.htm

    How to enable a device in Device Manager in Windows Vista
    http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

    If necessary:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

     
  • When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

    When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

    Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

  • SQL: fill the same value, until it gets another NOT NULL value

    It's my main table

    CREATE TABLE MAIN (EMPNO INTEGER, DATE OF EFF_DT);
    INS IN HAND VALUES(1,'2013-01-01');
    INS IN HAND VALUES(1,'2013-03-01');
    INS IN HAND VALUES(1,'2013-05-01');
    INS IN HAND VALUES(1,'2013-07-01');
    INS IN HAND VALUES(1,'2013-09-01');
    INS IN HAND VALUES(1,'2014-01-01');


    It's my table of choice

    CREATE TABLE LKP (EMPNO INTEGER, TYPE_CD VARCHAR (10), EFF_DT DATE);
    INS IN LKP VALUES(1,'A','2013-01-01');
    INS IN LKP VALUES(1,'B','2014-01-01');

    My query:

    SALT
    M.EMPNO AS MAIN_EMP,
    M.EFF_DT AS MAIN_DT,
    L.TYPE_CD
    HAND M LEFT JOIN LKP L ON M.EMPNO = L.EMPNO AND M.EFF_DT = L.EFF_DT

    Result:
    MAIN_EMP MAIN_DT TYPE_CD
    2013-01-01 1A
    1 01-03-2013?
    1 05-01-2013?
    1 01-07-2013?
    1 01-09-2013?
    2014-01-01 1, B

    Expected result: (I need to get the same value, until I have a new value of research)

    MAIN_EMP MAIN_DT TYPE_CD
    2013-01-01 1A
    2013-03-01 1A
    2013-05-01 1A
    2013-07-01 1A
    2013-09-01 1A
    2014-01-01 1, B

    Please help me in this regard.

    Concerning

    KVB

    RaminHashimzade wrote:

    For 11g (ignores null values)

    SELECT M.EMPNO AS MAIN_EMP,

    M.EFF_DT AS MAIN_DT,

    NVL (L.TYPE_CD, lag(L.TYPE_CD ignore nulls) over (partition by M.EMPNO of M.EFF_DT order)) TYPE_CD

    HAND M

    LEFT JOIN LKP L

    ON M.EMPNO = L.EMPNO

    AND M.EFF_DT = L.EFF_DT

    order by 2

    ----

    Ramin Hashimzade

    It's not only 11g, which is also 10g

  • Find the same value in different columns

    Hello

    I'm trying to figure out how I would get the same value in the same row but in different columns. For example, in the table sometimes report the name is the same as the description. I would like to find all the lines where this is the case.

    Thank you

    Name of the report
    Description
    Date
    Time
    Report 1Report 1DelalandeTTTT
    Report 2Billing reportDelalandeTTTT
    Report 3Report 3DelalandeTTTT

    Hello

    Is that what you want?

    SELECT *- or whatever the columns that you want to

    FROM table_x

    WHERE description = report_name

    ;

    If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
    Explain, using specific examples, how you get these results from these data.
    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002

  • (WRT54G) I need to set it up so that I get the same IP all the time for 1 computer on my network.

    I have 4 computer I have linked to the WRT54G. 2 2 with network cables and wireless. One of these computers I use as a server and I would get the same IP address to the server all the time. As 192.168.1.150. Now it depends on when I turn on my computer what IP they get. Is there a way to get a static IP address?

    Glenn (phonograph)


  • Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

    When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

    I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

    Should I re - publish so that else soeone looks like?

    If you wish.
    Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

    Alternatively, you wait for the next person coming.

    The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • get the index of the same values in table

    Hi guys,.

    I'm trying to get the index of array elements with the same value but it can solve mine.

    my case is:


    array1 = [1,2,3,4]; <-here are the names of the pages, always in the order of CSA (these table I used only to check the results of my work, probably will not be for you but maybe...)

    array2 = [1,1,2,2,2,3,4,4,4]; <-these numbers are random, but always in the CSA order (these are the names of pages for items in table 3)

    array3 = [a, b, g, i, f, e, c, h, d]; <-these are all the values of the elements I want to work with later. number of articles is still the same as in array2, their indexes are corresponding.

    array4 = [];

    I need to remove array3 everything, but one of each issue of array2 (as I will remove duplicates) or push to array4 an article of array3 for each number of the array array2 (as I'm going to ignore duplicates)

    don't know is my desc is clear enough, but the result I get is:

    ex. [a, g, e, c]

    above example for each number of array2 array3 items, but do not have to be first, can be second or third if etc exist, but have to be alone.

    I thought that if I get duplicate values, the index in the array array2 and delete this index in array3 will get what I want, but can not solve.

    You will appreciate all help.

    Thank you

    Try something like this:

    var array2 = [1,1,2,2,2,3,4,4,4];
    var array3 = ["a","b","g","i","f","e","c","h","d"];
    
    var tempArray = [];
    var resultArray = [];
    var n , x ;
    
    for(var n=array2.length-1;n>=0;n--)
    {
        var string = ""+array2[n];
        tempArray[string] = array3[n];
    }
    
    for(x in tempArray)
    {
        resultArray.push(tempArray[x]);
    }
    
    resultArray.reverse();
    // a,g,e,c
    

    Hope, that helps.

    Uwe

  • How can I get a CMYK or Gray scale halftone and replace it with a spot color with the same value of midtones?

    Is it possible that I can select an object or objects that have a value of mixed CMYK or Grayscale, and then select a Spot color and it will keep the same value of midtones as before?

    For example, I have an object that is C: 0 M: 0 Y: 0 k: 20 and I select Reflex Blue. What is happening is it change my object to 100% Reflex Blue. Is there a way to change to automaitically Reflex Blue 20%?

    Another example, I have 3 objects, one is 20 k: the second is 40 k: and the third is KC: 85. I want to select all the objects in three at the same time, select Yellow PANTONE and get them to change yellow PANTONE 20, 40 yellow PANTONE and PANTONE yellow 85.

    Is there a way to do it or I will always have to manually edit each element?

    Thanks for the help.

    Select the elements to recolor

    Edit > edit colors > redefine > follow my screenshots

    I love clicking this button under the entitlement, one place for everything that you color reduction settings.

    Use tinted scale. Exact will give you 100% of the color. The exact word is confusing here, this means that the color of the destination (100% of everything that the color you choose), not a version tinged scale.

    Unfortunately I do not know how to get the exact values of blacks to convert the exact values of spot color. Scale of hues will you get you get you close enough for what you need. In my example that a black 89% converts a 84% of the place, so no exact but alteast I have a range of shades, and sometimes the results are better than accurate, depends on your art.

    Here are my before and after.

  • The column is to summarize all the lines and display the same value in all the lines.

    Hello

    Please see the query below. I have a problem in this query to retrieve the abs_qty when the P:item ie setting) msib.segment1 is not given as an input parameter. His warning just to the top of the total quantity for all items. With the passage of P:item ie) msib.segment1 as an input parameter, it gets the exact value for abs_qty. kindly help me to solve this problem.

    Note only: manufacturing plant, start date and end Date are Mandatory parameters (required). Others such as code point, Base model and Scheduler are optional.

    SELECT mmt.transaction_date date_produced, msib.segment1 point,
    CIC.cost_type_id, msib.description item_description,
    MC.segment6 base_model, mc.segment7 trade_brand,
    MMT.subinventory_code subinventory,
    mil. Segment1 | '.' || mil. Segment2 | '.' || mil.segment3 ELECTROLUX,
    OOD.organization_code
    || '-'
    || OOD.organization_name manufacturing_plant,
    MMT.transaction_quantity quantity_produced,
    MTT.transaction_type_name transaction_type, msib.inventory_item_id,.
    MSIB.organization_id, cic.material_cost, COST,
    CIC.material_overhead_cost transport, csc.standard_cost,.
    * (check (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty *))))
    OF mtl_material_transactions mmt.
    mtl_system_items_b msib,
    mtl_transaction_types mtt,
    org_organization_definitions ood,
    mtl_txn_source_types mts
    WHERE mmt.organization_id = msib.organization_id
    AND msib.inventory_item_id = mmt.inventory_item_id
    AND mmt.transaction_type_id = mtt.transaction_type_id
    AND mmt.organization_id = ood.organization_id
    AND mtt.transaction_type_name = "Completion of work in PROGRESS"
    AND mts.transaction_source_type_name = 'job or schedule. "
    AND msib.segment1 = NVL (: p_item, msib.segment1)
    AND ood.organization_code =: p_manufacturing_plant
    AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
    AND: p_end_date), 0)
    -
    * (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty *)))
    OF mtl_material_transactions mmt.
    mtl_system_items_b msib,
    mtl_transaction_types mtt,
    org_organization_definitions ood,
    mtl_txn_source_types mts
    WHERE mmt.organization_id = msib.organization_id
    AND msib.inventory_item_id = mmt.inventory_item_id
    AND mmt.transaction_type_id = mtt.transaction_type_id
    AND mmt.organization_id = ood.organization_id
    AND mtt.transaction_type_name = "Ongoing work exit"
    AND mts.transaction_source_type_name = 'job or schedule. "
    AND msib.segment1 = NVL (: p_item, msib.segment1)
    AND ood.organization_code =: p_manufacturing_plant
    AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
    AND: p_end_date
    *), 0))) abs_qty of the double) AS ABS_qtyy, * (select (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty
    OF mtl_material_transactions mmt.
    mtl_system_items_b msib,
    mtl_transaction_types mtt,
    org_organization_definitions ood,
    mtl_txn_source_types mts
    WHERE mmt.organization_id = msib.organization_id
    AND msib.inventory_item_id = mmt.inventory_item_id
    AND mmt.transaction_type_id = mtt.transaction_type_id
    AND mmt.organization_id = ood.organization_id
    AND mtt.transaction_type_name = "Completion of work in PROGRESS"
    AND mts.transaction_source_type_name = 'job or schedule. "
    AND msib.segment1 = NVL (: p_item, msib.segment1)
    AND ood.organization_code =: p_manufacturing_plant
    AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
    AND: p_end_date), 0)
    -
    (((SELECT SUM (mmt.transaction_quantity) total_NET_qty NVL
    OF mtl_material_transactions mmt.
    mtl_system_items_b msib,
    mtl_transaction_types mtt,
    org_organization_definitions ood,
    mtl_txn_source_types mts
    WHERE mmt.organization_id = msib.organization_id
    AND msib.inventory_item_id = mmt.inventory_item_id
    AND mmt.transaction_type_id = mtt.transaction_type_id
    AND mmt.organization_id = ood.organization_id
    AND mtt.transaction_type_name = "Ongoing work exit"
    AND mts.transaction_source_type_name = 'job or schedule. "
    AND msib.segment1 = NVL (: p_item, msib.segment1)
    AND ood.organization_code =: p_manufacturing_plant
    AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
    AND: p_end_date
    (), 0))) abs_qty of dual) * csc.standard_cost AS abs_val
    OF mtl_material_transactions mmt.
    mtl_system_items_b msib,
    mil mtl_item_locations
    mtl_transaction_types mtt,
    org_organization_definitions ood,
    mtl_txn_source_types mts,
    MC mtl_categories,
    mtl_item_categories mic,
    MCS mtl_category_sets,
    cst_item_costs cic,
    cst_standard_costs csc,
    cst_cost_types ct,
    mfg_lookups OLM
    WHERE mmt.organization_id = msib.organization_id
    AND msib.inventory_item_id = mmt.inventory_item_id
    AND mmt.locator_id = mil.inventory_location_id
    AND mil.organization_id = msib.organization_id
    AND mil.subinventory_code = mmt.subinventory_code
    AND mmt.transaction_type_id = mtt.transaction_type_id
    AND msib.organization_id = ood.organization_id
    AND mic.category_set_id = mcs.category_set_id
    AND mc.category_id = mic.category_id
    AND mc.structure_id = mcs.structure_id
    AND mic.inventory_item_id = msib.inventory_item_id
    AND mic.organization_id = msib.organization_id
    AND mcs.category_set_id = 52487965
    AND msib.inventory_item_id = cic.inventory_item_id
    AND msib.organization_id = cic.organization_id
    AND ct.cost_type_id = cic.cost_type_id
    AND cic.organization_id = ood.organization_id
    AND mil.inventory_location_id = mmt.locator_id
    AND mmt.transaction_source_type_id = mtt.transaction_source_type_id
    AND mmt.transaction_action_id = mtt.transaction_action_id
    AND mmt.transaction_source_type_id = mts.transaction_source_type_id
    AND mmt.transaction_action_id = mlo.lookup_code
    AND mmt.inventory_item_id = csc.inventory_item_id
    AND mmt.organization_id = csc.organization_id
    AND csc.last_update_date > =.
    (SELECT MAX (csc1.last_update_date)
    OF cst_standard_costs csc1
    WHERE csc1.inventory_item_id = mmt.inventory_item_id
    AND csc1.organization_id = mmt.organization_id)
    AND msib.segment1 = NVL (: p_item, msib.segment1)
    AND NVL (mc.segment6, 'X') = NVL (: p_base_model, NVL (mc.segment6, 'X'))
    AND = NVL (msib.planner_code, 'Y')
    NVL (: p_planner_code, NVL (msib.planner_code, 'Y'))
    AND SUPERIOR (mlo.meaning) = "COMPLETION of the ASSEMBLY.
    AND mtt.transaction_type_name = "Completion of work in PROGRESS"
    AND ct.cost_type = 'Frozen '.
    AND mts.transaction_source_type_name = 'job or schedule. "
    AND ood.organization_code =: p_manufacturing_plant
    AND BETWEEN TRUNC (mmt.transaction_date): p_start_date AND: p_end_date

    If abs_qty and, accordingly, abs_val must not be the same for all rows returned, you will need to rewrite your query so that the abs_qty will not be calculated (separately) in isolation without interaction with the data in the main table list.
    Your query is treated the same as below (note the changed table alias by adding numbers to the original of yours)

    SELECT mmt.transaction_date date_produced,
           msib.segment1 item,
           cic.cost_type_id,
           msib.description item_description,
           mc.segment6 base_model,
           mc.segment7 trade_brand,
           mmt.subinventory_code subinventory,
           mil.segment1 || '.' || mil.segment2 || '.' || mil.segment3 LOCATOR,
           ood.organization_code || '-' || ood.organization_name manufacturing_plant,
           mmt.transaction_quantity quantity_produced,
           mtt.transaction_type_name transaction_type,
           msib.inventory_item_id,
           msib.organization_id,
           cic.material_cost COST,
           cic.material_overhead_cost freight,
           csc.standard_cost,
           (select (NVL(
                        (SELECT SUM (mmt1.transaction_quantity) total_NET_qty
                           FROM mtl_material_transactions mmt1,
                                mtl_system_items_b msib1,
                                mtl_transaction_types mtt1,
                                org_organization_definitions ood1,
                                mtl_txn_source_types mts1
                          WHERE mmt1.organization_id = msib1.organization_id
                            AND msib1.inventory_item_id = mmt1.inventory_item_id
                            AND mmt1.transaction_type_id = mtt1.transaction_type_id
                            AND mmt1.organization_id = ood1.organization_id
                            AND mtt1.transaction_type_name = 'WIP Completion'
                            AND mts1.transaction_source_type_name = 'Job or Schedule'
                            AND msib1.segment1 = NVL (:p_item, msib1.segment1)
                            AND ood1.organization_code = :p_manufacturing_plant
                            AND TRUNC (mmt1.transaction_date) BETWEEN :p_start_date AND :p_end_date
                        ),0
                       ) - NVL(
                               (SELECT SUM (mmt2.transaction_quantity) total_NET_qty
                                  FROM mtl_material_transactions mmt2,
                                       mtl_system_items_b msib2,
                                       mtl_transaction_types mtt2,
                                       org_organization_definitions ood2,
                                       mtl_txn_source_types mts2
                                 WHERE mmt2.organization_id = msib2.organization_id
                                   AND msib2.inventory_item_id = mmt2.inventory_item_id
                                   AND mmt2.transaction_type_id = mtt2.transaction_type_id
                                   AND mmt2.organization_id = ood.2organization_id
                                   AND mtt2.transaction_type_name = 'WIP Issue'
                                   AND mts2.transaction_source_type_name = 'Job or Schedule'
                                   AND msib2.segment1 = NVL (:p_item, msib2.segment1)
                                   AND ood2.organization_code = :p_manufacturing_plant
                                   AND TRUNC (mmt.2transaction_date) BETWEEN :p_start_date AND :p_end_date
                               ),0
                              )
                   ) abs_qty
              from dual
           ) AS ABS_qtyy,
           (select (NVL(
                        (SELECT SUM (mmt3.transaction_quantity) total_NET_qty
                           FROM mtl_material_transactions mmt3,
                                mtl_system_items_b msib3,
                                mtl_transaction_types mtt3,
                                org_organization_definitions ood3,
                                mtl_txn_source_types mts3
                          WHERE mmt3.organization_id = msib3.organization_id
                            AND msib3.inventory_item_id = mmt3.inventory_item_id
                            AND mmt3.transaction_type_id = mtt3.transaction_type_id
                            AND mmt3.organization_id = ood3.organization_id
                            AND mtt3.transaction_type_name = 'WIP Completion'
                            AND mts3.transaction_source_type_name = 'Job or Schedule'
                            AND msib3.segment1 = NVL (:p_item, msib3.segment1)
                            AND ood3.organization_code = :p_manufacturing_plant
                            AND TRUNC (mmt3.transaction_date) BETWEEN :p_start_date AND :p_end_date
                        ),0
                       ) - NVL(
                               (SELECT SUM (mmt4.transaction_quantity) total_NET_qty
                                  FROM mtl_material_transactions mmt4,
                                       mtl_system_items_b msib4,
                                       mtl_transaction_types mtt4,
                                       org_organization_definitions ood4,
                                       mtl_txn_source_types mts4
                                 WHERE mmt4.organization_id = msib4.organization_id
                                   AND msib4.inventory_item_id = mmt4.inventory_item_id
                                   AND mmt4.transaction_type_id = mtt4.transaction_type_id
                                   AND mmt4.organization_id = ood4.organization_id
                                   AND mtt4.transaction_type_name = 'WIP Issue'
                                   AND mts4.transaction_source_type_name = 'Job or Schedule'
                                   AND msib4.segment1 = NVL (:p_item, msib4.segment1)
                                   AND ood4.organization_code = :p_manufacturing_plant
                                   AND TRUNC (mmt4.transaction_date) BETWEEN :p_start_date AND :p_end_date
                               ),0
                              )
                   ) abs_qty
              from dual
           ) * csc.standard_cost AS abs_val
      FROM mtl_material_transactions mmt,
           mtl_system_items_b msib,
           mtl_item_locations mil,
           mtl_transaction_types mtt,
           org_organization_definitions ood,
           mtl_txn_source_types mts,
           mtl_categories mc,
           mtl_item_categories mic,
           mtl_category_sets mcs,
           cst_item_costs cic,
           cst_standard_costs csc,
           cst_cost_types ct,
           mfg_lookups mlo
     WHERE mmt.organization_id = msib.organization_id
       AND msib.inventory_item_id = mmt.inventory_item_id
       AND mmt.locator_id = mil.inventory_location_id
       AND mil.organization_id = msib.organization_id
       AND mil.subinventory_code = mmt.subinventory_code
       AND mmt.transaction_type_id = mtt.transaction_type_id
       AND msib.organization_id = ood.organization_id
       AND mic.category_set_id = mcs.category_set_id
       AND mc.category_id = mic.category_id
       AND mc.structure_id = mcs.structure_id
       AND mic.inventory_item_id = msib.inventory_item_id
       AND mic.organization_id = msib.organization_id
       AND mcs.category_set_id = 52487965
       AND msib.inventory_item_id = cic.inventory_item_id
       AND msib.organization_id = cic.organization_id
       AND ct.cost_type_id = cic.cost_type_id
       AND cic.organization_id = ood.organization_id
       AND mil.inventory_location_id = mmt.locator_id
       AND mmt.transaction_source_type_id = mtt.transaction_source_type_id
       AND mmt.transaction_action_id = mtt.transaction_action_id
       AND mmt.transaction_source_type_id = mts.transaction_source_type_id
       AND mmt.transaction_action_id = mlo.lookup_code
       AND mmt.inventory_item_id = csc.inventory_item_id
       AND mmt.organization_id = csc.organization_id
       AND csc.last_update_date >= (SELECT MAX (csc1.last_update_date)
                                      FROM cst_standard_costs csc1
                                     WHERE csc1.inventory_item_id = mmt.inventory_item_id
                                       AND csc1.organization_id = mmt.organization_id
                                   )
       AND msib.segment1 = NVL (:p_item, msib.segment1)
       AND NVL (mc.segment6, 'X') = NVL (:p_base_model, NVL (mc.segment6, 'X'))
       AND NVL (msib.planner_code, 'Y') = NVL (:p_planner_code, NVL (msib.planner_code, 'Y'))
       AND UPPER (mlo.meaning) = 'ASSEMBLY COMPLETION'
       AND mtt.transaction_type_name = 'WIP Completion'
       AND ct.cost_type = 'Frozen'
       AND mts.transaction_source_type_name = 'Job or Schedule'
       AND ood.organization_code = :p_manufacturing_plant
       AND TRUNC (mmt.transaction_date) BETWEEN :p_start_date AND :p_end_date
    

    Concerning

    Etbin

  • All channels to HAVE it have the same value - NI PCI-6221 and NI PCI-6229

    Hello

    I use the aiex1.cpp example for a multi-channel read with the devices mseries 6221 and 6229.

    This example works for a lane, but other chains have the same value (difference of +-0.001 Volt).

    For example: I put 5 Volt on the first string, and then the other channel are 5 Volt too.

    What should I consider in the configuration?

    Heiko Hello!

    your description looks like the effect you are having 'ghosts '.

    For more information about ghost images and how to get rid of, check out these links:

    http://digital.NI.com/public.nsf/allkb/73CB0FB296814E2286256FFD00028DDF?OpenDocument

    and

    http://digital.NI.com/public.nsf/allkb/C6C7DE575301A379862572DD00480A01?OpenDocument

    Best regards

    Moritz M.

  • I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

    It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

    Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

    Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

    If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

    Steve

  • Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use

    Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use.  Problem is that I'm not running anywhere.   I checked my task manager, and is not in the applications or processes.  I tried to restart my computer a couple of times, correctly and a hard reset as well and nothing works.  Google Chrome and Internet Explorer are the two works very well.  Help, please.

    Original title: loading Firefox problem

    Hello

    I suggest that you are looking for or post on the Forums of Firefox.

    http://forums.mozillazine.org/viewforum.php?f=38

    Don

  • Exception while trying to get the selected value for the choice of SelectOne in ADF Mobile

    I added the following code after arriving through this post https://forums.oracle.com/thread/2536419

    DCBindingContainer dcBindings = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

    DCIteratorBinding iterBind = (DCIteratorBinding) dcBindings.get ("facilitySelectItems");

    Attribute String = (String) iterBind.getCurrentRow () .getAttribute (0);

    But Jdeveloper complained class BindingContext wasn't available and I get the jar file adfm.jar has not been added to the project. I added it manually the path C:\JDeveloper11r24\oracle_common\modules\oracle.adf.model_11.1.1\adfm.jar. Once I've deployed code on an android emulator, I get the below error. Can someone please?

    07-25 13:18:03.812: D/CordovaLog (869): [SEVERE - oracle.adfmf.framework - adf.mf.internal - logError] request: {classname: oracle.adfmf.framework.api.Model; method: evaluateMethodExpression; params: [0: #{pageFlowScope.IBCMSearchBean.getSearchParams}] [1:] [2: {}] [3:] ;} exception: {message: oracle/adf/model/binding/DCBindingContainer (unsupported major.minor version 50.0); the severity: ERROR; .Guy: oracle.adfmf.framework.exception.AdfException; .exception: true ;}}}

    The version of the compiler maximum the JDev shows that 1.4. And I'm using version 11.1.2.4.0 for JDeveloper. The JDK version is 1.6.0_24.

    Sorry I missed the question!

    First of all, to get the value of selectedItem in selectOneChoice do not have another function in the domain controller. Here is an excellent article by Frank that explains this. Or you can use the below function to get the selected value immediately. Here the market is the value of selectOneChoice attribute. I wasn't aware of this method until you have read this article.

    {} public void getAndSetMarketValue (market of the object)

    ValueExpression ve = (ValueExpression) AdfmfJavaUtilities.getValueExpression ("#{bindings.marketSelectItems}", Object.class);

    AmxAttributeBinding attrBinding = (AmxAttributeBinding) ve.getValue (AdfmfJavaUtilities.getAdfELContext ());

    access the iterator that populates the list of values in

    the selectManyChoice component

    AmxIteratorBinding amxListIterator = attrBinding.getIteratorBinding ();

    the AmxIteratorBinding is a wrapper for the BasicIterator

    iterator which sets out the information we need

    ListIterator BasicIterator = amxListIterator.getIterator ();

    for each index value, query the name of the service (you can

    access and attribute from the line) to display

    SelectedValue = string

    (String) listIterator.getAttributeValueAtIndex (((New Integer ((String) market))) .intValue (), "Value");

    }

    Second, you can use #{row} in commandLink's action since it is something that is evaluated when the user clicks on the link and we do not have access to #{line} after that the entire component is rendered. To remedy this give an action for the commandlink which is a function in the bean and the function of bean back to the action of the link selected.

    ListOfReports.amx

    .......

    .......

    LoginBean.java

    ......

    public String returnClickValue() {}

    Option of string = AdfmfJavaUtilities.evaluateELExpression("#{viewScope.selectedItem}").toString ();

    return option;

    }

    ......

  • How to create a default color palette in illustrator CS5?

    How to create a default color palette in illustrator CS5? I searched the forums, but I can't find only CS3 and 4. I might be blind.

    Please ask in the forum Illustrator.

Maybe you are looking for

  • Cannot find the iTunes on my phone app

    After updating my phone, I have more the iTunes Store app?

  • Unknown devices in device Windows 7 Manager - dv7-2170us

    I have a laptop dv7-2170us. I did a clean install with Windows 7 Home Premium 64-bit. I used the drivers for this model of laptop on HP's site. I get a few unknown devices in Device Manager. I tried to uninstall the device and re - install to allow W

  • computer hp laptop 15-r200nq: can not contect to any hp 15-r200nq network

    Hi I have this during two days, and I install win 7 and 8, in both cases I have won a few errors in the Device Manager cannot find the network controller, can not conect with WiFi. I tried all the drivers I found on the hp site, but none works. I did

  • Update to the top not dating?

    The last security update will not update it gets past step 3 and appers to boot normally and then I get a record of 89 89 of message, then restarts and cancels the update and starts normally. I have postponed my antivirus during installation.Any idea

  • Need drivers for AM3641-ED2200A

    Hello everyone, I bought an Acer AM3641-ED2200A of second hand and I am looking for the drivers for it to ensure it is all to date. especially if it is possible the bios drivers for you ensure they are good. But I can't find even a mention that this