How to create a unique fixed break point to allow scrolling effects?
I am creating a site that has scrolling effects. I somehow just can't understand for the life of me how to create a 'unique fixed breakpoint. I already have a fluid breakpoint, and whenever I try adding one, it does not always activate scrolling effects. I think it's something very obvious, I'm missing - any advice?
To use the effects of roll, your site must be fixed in width, not fluid. Scroll effects are disabled when you add a second breakpoint.
David
Tags: Adobe Muse
Similar Questions
-
I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.
Thank you!
Hello
is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.
1. There is only a breakpoint in the page as shown in the screenshot below.
2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.
In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.
Kind regards
Vivek
-
Hi all
Can someone let me know how to create a Unique constraint on a column that already has duplicates. Only future duplicates must be avoided.
Any help will be greatly appreciated.
Best regards
gt1942
ALTER table
Add constraint unique (column_name) may be deferred novalidate; -
How to create a rectangle from a point and a distance?
first of all, sorry for my English...
I need to create rectangle/polygon from a point (coords in WGS84) and a distance in meter.
for example: point: lon: lat:48.63 2.91
distance north of 750 m
distance to South 260 m
distance is 100 m
distance to the West of 340 m
I want to create a rectangle with this tip
LON - lat 340 + 750
LON + 100 lat + 750
LON + lat 100-260
lat lon-340-260
LON - lat 340 + 750
Thanks for your help
Take a look at the SDO_UTIL. Function POINT_AT_BEARING:
http://docs.Oracle.com/CD/E11882_01/AppDev.112/e11830/sdo_util.htm#SPATL1240
You will need to do it in two steps, first from the center point to the temporary points towards the North, South, East and West. Then find the corners using offsets you have.
I would personally just make a function to do this, by the way the central point as geometry and then different offsets - returns the geometry of your polygon.
Bryan
-
Does anyone know how to create the type of top navigation bar in Muse on this site: character. Branding and Design Agency
Not sure if there is a way to do so in the muse or outside widget to do, or if it requires HTML.
When you scroll down, it masks by pushing upward, and when you scroll upwards it reappears by pushing down. Not sure if there is a name for it, but I couldn't find anything in my research. I would really like this on my portfolio website.
Thank you!
Reid
It's may not be done by regular means of Muse. You must be JavaScript coder to make.
-
How to create a unique temporary table delete automatically after the join?
I have a lot of users simultaneously accessing web applications.
My problem is how to fix the SELECT WHERE IN('..') clause ...
I read a lot of threads with the same option...
(1) open the connection and start transaction
2) create temporary table
(3) Insert (insert batch) data
(4) the main objective. SELECT JOIN or SELECT WHERE IN (SUBQUERY).
(5) end of transaction and close the connection
How can I ensure that the temporary table created was deleting/moving on 5)?
Thank you very much..You can do this by using global temporary tables. Also data from the temporary table is automatically deleted after that validation but the table will remain.
for example
CREATE TEMPORARY TABLE global today_sales
ON COMMIT DELETE ROWS
AS SELECT * FROM Orders WHERE order_date = SYSDATE;http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/tables.htm#i1006400
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_7002.htm#i2153132
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_7002.htm#i2153132
Concerning
RajeshPublished by: Rajesh on June 10, 2010 15:34
-
How to create a class and a pointer to the Panel
Hi all
I'm new to Flex. I created a dynamic group that has three children, added to it. The three children are Hbox and Vbox or an Hbox. The first Hbox with a label that should be updated every minute. I tried using getChildrenAt and it works and it seems .as Hack I'm doing like getChildrenAt (0) as Hbox, I have more than one group of experts and all the Panel must be updated values. So is it possible. I could create a class and has a pointer on the Panel and a pointer to the label, which will be called every minute and on the change of the label in the front of this update
Thanks in advance
Barro
OK yes I think I understand now look to examples. First heres my custom panel ELEMENT.
package
{
Import mx.containers.Panel;
Import mx.controls.Label;
SerializableAttribute public class MyPanel extends Panel
{
private var _labelValue:String
private var labelSet:Boolean;
private var myLabel:Label;
public void MyPanel()
{
Super();
}
public function set {labelValue(value:String):void}
_labelValue = value;
labelSet = true;
invalidateProperties();
invalidateSize();
}
public function get labelValue (): String {}
Return _labelValue;
}
override protected function createChildren() (): void {}
super.createChildren ();
myLabel = new Sun;
addChild (myLabel);
}
override protected function commitProperties (): void {}
super.commitProperties ();
If {(labelSet)
MyLabel.set_Text = _labelValue;
labelSet = false;
}
}
}
}
Pretty basic it creates a tag in the Panel. Opinion, he still has the labelValue public property which, when set, sets the text in the label.
Now for the main application
<>
"xmlns:MX ="http://www.adobe.com/2006/mxml"
Layout = "vertical" width = "100%" height = "100%".
creationComplete = "createPanels ()" > "
Used to store references to the panels when you create
private var panelReferences:Array;
My replacement for xml, but will work the same way.
private var myData:Array = new Array)
{panelName: "Group 1"},
{panelName: "group 2"},
({panelName: "Group 3"});
Look in the table (your XML and create panels
private function createPanels (): void {}
panelReferences = new Array();
Create panesl and add on demand
for (var i: int = 0; i
var mPanel:MyPanel = new MyPanel();
mPanel.labelValue = myData [i] .panelName;
mPanel.width = 100;
mPanel.height = 70;
Add the panels also in the table of references
panelReferences.push (mPanel);
addChild (mPanel);
}
}
private function changePanelHandler (): void {}
Change the label of panels in the panelReferences table.
Target group by using the index number
panelReferences [ns.value] .labelValue = newLabel.text;
}
]]>
It loops through the data in the table that is the source for the panels. As he does and creates a new Panel, it adds to the application, but also the reference to the panelReferences table. Now in the demo app every time you want to set the value, you just do it on the reference in the references table and so it's a pointer property labelValue Panel Gets the value, and then updates the text in the Panel.
I think that this covers what you want.
With regard to the interfaces. Tell everyone your signs accepts different types of data (they are all channels) and implemented the data in different ways. Her you would use one interface. This would ensure all panels used consistantly Sami methods, but might implement these different ways.
I hope this helps
Andrew
-
How to create a value fixed for simultaneous program?
Hi friends,
I create a simultaneous program with a period of setting...
In the value set for parameter period, I use the following query:
-where application_id = 101
and set_of_books_id =: $PROFILES$ .gl_set_of_bks_id
and closing_status IN ('o', 'F', 'C')
order of period_year, period_num' -.
In my cursor, I have one condition ' where set_of_books_id = '.
How can I switch the whole above ID of books in the cursor? It does not work when I'm defining another parameter like book and passing this value to the cursor...
I need this period parameter to return all periods for all the books where we run the concurrent application of... I also need to get all of the books for my cursor IDs...
I hope I'm making sense... What I'm trying must have the period setting and also an OB id in condition of cursor...
Rgds,Please use the following example
Start
FND_GLOBAL. APPS_INITIALIZE (user_id-online-1, resp_id-online 51901, resp_appl_id-online 222);
end;DECLARE
SET_BKS VARCHAR2 (20);
BEGIN
FND_PROFILE. GET ('GL_SET_OF_BKS_ID', SET_BKS);
DBMS_OUTPUT. PUT_LINE (SET_BKS);
END;Maybe this will help you
Concerning
Nitin -
How to create a unique page on one side of the other view?
I have a document that considers the side-by-side, except the first page. I would like to see unique page and the ability to print a page by page!
Any help?
Thank you
Blue
Looks like you don't have a side-by-side, as it is normally referred to in Acrobat, but that the PDF file is actually a set of pages that are 2 pages per sheet. To be able to print a page of the worksheet, use the crop tool to select one side (and the same on all the leaves if you select everything). Then print this set. For other pages, simply move the culture across the sheet and repeat. Looks like it's what you're trying to do. If you want a single PDF file with 1 page per sheet, a crude to do this is to print each cropped to new PDF series. Then merge the two sets of printing and then rearrange the pages.
-
How to create a unique typing path, not traced many trails?
Hello
I'm a bit new to illustrator, but I can't understand it.
I have a few negative space I created (black box, see first image) I want to fill it with type, not just a simple filling.
Basically, I want to create the negative space of a bunch of smaller less signs (-) who need to align as they go everywhere. If I tap on each path one at a time as the text isn't online in this way. It must be a continuous path. (see the second picture)
Unfortunately, if I added up, it creates a compound path, that you cannot type on, except if I am wrong? I therefore need to be a path, and not a compound object.
I hope that makes sense, any help would be greatly appreciated.
Thank you!
It must be a continuous path. (see the second picture)
No, it must simply be a thread of continuous text.
Unfortunately, if I added up, it creates a compound path, that you cannot type on...
Text wrapping works with transparent traces:
Use an AreaType (not PointType, not pathType) object. Use justify full alignment of a paragraph. Define the spaces between each character.
JET
-
How to create a permanent fixed first tab in Firefox 30. ??
Hi all
I'm looking for a way to establish a first permanent tab in Firefox. I read descriptions of all the Extensions available without success and, in addition, do not wish to wear a bunch of "stuff" with the feature I'm looking for < G >.
I know that it is maybe the idea of this feature won't revolutionize Firefox, but it is only a function of personal preference, I would have.
Thanks in advance,Hello
You can pin a tab, see more here pinned Tabs - keep favorite sites open and a simple click
-
How to create an Association in my default to allow sending emails,
I have an e-mail program that I have used for many years, but when I right click on a picture to send it to the recipient's eMail, I get the message that there is no email associated program Please create an association in the Panel by default.
If you do not actually use an email PROGRAM, you use a web browser to access your Hotmail account? (An e-mail program is something like Outlook or Thunderbird or Windows Live Mail).
See here to find out how your Hotmail on the web the default email in Windows 7:
-
How to set "allow scrolling" effect and show default highlighter?
I think the option to activate the scrolling let's move you from one page to another all the time and I have to change in settings everytime I open acrobat. How to put in effect by default in preferences and also, how to show the highlighter at each startup?
Hi TheTaj,
You can set the Page layout option "Single Page continues" in the Edit menu > Preferences > Page display.
Please also check the box for "Restore last view settings when reopening documents" in Preferences > Documents.
However, highlight is set by default to the toolbar at the top.
Let us know if you need help.
Kind regards
Meenakshi
-
How to make the text in the header change with scrolling effects?
Im trying to do a header which changes when you scroll the page. I know how to make the text scrolls and back according to the key position, but his does not work if my key is less than my position of text on the page.
Ideally, I would like to get so that I scroll to the area of 'Wine', the previous header will slide out and 'Wine' will slide in from the left.
Any ideas?
You can try these:
http://musewidgets.com/products/Parallax-list
http://musewidgets.com/products/three-box
Thank you
Sanjit
-
How to create a pointed round object for the seal of approval
Hi - I'm really not great with Illustrator so I hope someone can help me. See the image below:
I downloaded the Deaf friendly seal as a vector image of a stock website. Now my co-workers want to add me as 'sunburst' round edge and place it behind the round part of the Deaf friendly. Instead of downloading another vector image of the sharp round thing, I would try to do it myself, but I'm not good with Illustrator.
Can you give a tutorial or help on how to create this round object with points around it - maybe a quick and easy way to do it?
Thanks in advance.
- Hold-click and drag with the star tool (keep the mouse down)
- Use up arrow curosr to add points
- Press and hold the command Ctrl-PC-Mac change of inner radius
When it seems good coward of mouse
Maybe you are looking for
-
WINDOWS MEDIA PLAYER 12 WORKS WITH WNDOWS XP?
Media Player 12 works with windows xp?
-
Error code 0 x 00000004 0x77c2a61d
0x77c2a61d 0 x 00000004 a window pops up every 20 minutes or so on my laptop running XP I get this error Code (it may have to do with my Targas Docking Station) Can someone help me?
-
How to send by fax the laptop using the network all-in-one printer
I have an all in one printer with network connections in my office, how can I send faxes from my laptop
-
Z10 blackBerry how? -Mark read previous
A command that I use all the time is 'mark all read '. For the life of me I can't find how to mark all previous messages as read in the hub. Can someone enlighten me?
-
Code Signing - cannot ask the application signature that requires to be signed
Hello I'm looking for, via the codesign tool, to the signature of the request for two .cod files. Necessary for the other to exploit one of the .cod files. For example, I have a library and a cldc app that depends on this library. I am able to sign c