How to create RAID 5 with 6 disks?
I'm new to vmware. My machine is currently running ESXi 4.1 but the RAID set up gives me no more disk space I was advice to remake the structure of the disc physically to have all 6 disks in RAID 5 and then reinstall ESXi. I'm doing, but I need a direction how to create RAID 5 with 6 disks. Can someone please help with this?
Thank you
SD
Assuming you are using the integrated Smart Array 6i controller it should without a problem. If you can get into the BIOS of conreollers, you can also boot from Smartstart CD and use the ACU (Array Configuration Utility). The ACU has the advantage that you can split the RAID in several logical drives. I usually create a small logical volume (~ 10GB) for the installation of the hypervisor (ESXi) and another large logical volume to the VMFS data store.
André
PS: When you respond by e-mail, please do not understand the original message.
Tags: VMware
Similar Questions
-
Dear Sir.
While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?
I wait your helpful to my set.
Thank you.
silamayThis is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all. I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.I don't understand most of what you wrote. You must activate the UEFI (below), then convert to GPT before installing Windows.
silamayHow can I install on a UEFI system?The T610 supports UEFI, but must be allowed. Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.
Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining. Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.
-
5.6.1 pages: How to create a table with more than 999 lines?
5.6.1 pages: How to create a table with more than 999 lines?
The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.
-
I can create RAID 0 with the Satellite A200-23 s
Hello!
-----
I have Toshiba Satellite A200-23 s.
This laptop has two (200 GB) HARD drives.
Can I create RAID 0 with this HARD drive?
-----
P.S. Sorry for my bad EnglishHello
First you must know that the A200 doesn t series support RAID technology!
Therefore, the RAID-0 is not possible.The phone supports 2 hard drives, but you cannot use RAID settings.
The two hard drives can be used separately and independent of each otherBest regards
-
How to create Hlp files with labwindows 9.0
Hello
I used to create the dll with Labwindows 8.5 and use them with TestStand... The advantage is that with the help file, I can add information to the Fp file and loading the DLL with TestStand, the "?" button to open the help file...
But the problem is that I can't find help with Labwindows 9.0 generation...
Does anyone know how to create file hlp with Labwindows 9.0?
The procedure with Labwindows 8.5 has been:
Modification of the PS file, then generate the Option-> windows help
Thank you very much
Ronan
-
How to create an app with space name?
Hi all
How to create an application with the space, for example "Hello Word" name When I run my Simulator, I got ' Hello$ 20World "instead. I use the plugin for eclipse for development. I can see the Application descriptor for my application, and it shows the thin space. I tried to change the Blackberry project properties tab generate file output name, but it doesn't help in any way. Please advise...
Goto Blackberry project properties
Click the general tab
Write in title = "Hello World".
and you can see your title of the modified project
I hope that you ask for it only!
-
How to create a form with a submit in CC button animate using Actionscript 3
How to create a form with a submit in CC button animate using Actionscript 3. The file will first be a SWF but will also have the flexibility to export as HTML5
I've searched high and low for an example of code for this entry.
Can someone help me please?
Thank you
You can use the same graphic assets of basis for two projects, but the coding will be different for everyone. You must work on the project of a code at a time.
-
How to create dummy data with 1 TB
Hi Expert,
May I know how to create dummy data with 1 TB to test performance. ?
Respect of
Liang
what columns you want to include? Basically, you can generate as many lines as you like to connect by queries - something like:
create the table big_t
as
with
generator1 like)
Select rownum id
of the double
connect by level<=>=>
)
,
generator2 as)
Select lpad ('* ', 1000,' *') col1
of the double
connect by level<=>=>
)
Select g1.id
g2.col1
of generator1 g1
generator2 g2
;
Of course, it is not 1 TB, but you can change the number of levels. Who said: I think you need to find a sensitive table first structure.
-
Hello
How to create a button with rollover that appears in a different place than the button when you move by using only the Muse (reversal may be a different shape and color of the button). I managed to do it using Photoshop and the separate layers and import it, but it is not a good solution. All suggestions will be welcome.
Thank you
You can try to use the widget of the Composition of the ToolTip. In this way, the trigger area is isolated and a "State of reversal" can be placed anywhere on the screen (compared to the trigger).
- Remove the two triggers additional default
- Set to display the targets on working capital
- Select hide all initially.
-
How to create a DVD with Media Encoder? Thank you!
How to create a DVD with Media Encoder? Thank you!
Export to mpeg2-DVD and use a design program like still to create DVD compatible files to burn to DVD.
-
How to create a window with its own window border other than the local system window border?
How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width of 1, then a transparent line with a width of 5. Inside, it's the content pane.
In JavaSE, there seems to be for the JFrame paintComponent() method to realize the effect.
I can't see what you're trying to do now: it's a little trickier. You need stage.initStyle (StageStyle.TRANSPARENT), and I think you have to imitate the transparent part of the border by the presence of a second vessel inside the root container, properly positioned.
Something like:
import javafx.application.Application; import javafx.application.Platform; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.scene.Scene; import javafx.scene.control.Button; import javafx.scene.layout.AnchorPane; import javafx.scene.layout.StackPane; import javafx.scene.paint.Color; import javafx.stage.Stage; import javafx.stage.StageStyle; public class CustomBorderExample extends Application { @Override public void start(Stage primaryStage) { AnchorPane root = new AnchorPane(); root.setStyle("-fx-border-color: black; -fx-border-width: 1px; "); StackPane mainContainer = new StackPane(); AnchorPane.setTopAnchor(mainContainer, 5.0); AnchorPane.setLeftAnchor(mainContainer, 5.0); AnchorPane.setRightAnchor(mainContainer, 5.0); AnchorPane.setBottomAnchor(mainContainer, 5.0); mainContainer.setStyle("-fx-background-color: aliceblue;"); root.getChildren().add(mainContainer); primaryStage.initStyle(StageStyle.TRANSPARENT); final Button closeButton = new Button("Close"); mainContainer.getChildren().add(closeButton); closeButton.setOnAction(new EventHandler
() { @Override public void handle(ActionEvent event) { Platform.exit(); } }); primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT)); primaryStage.show(); } public static void main(String[] args) { launch(args); } } -
How to create a table with two unique columns
How to create a table with two unique columns. I use the following syntax below and I get the error message such unique or primary key already exists.
create the table COPQ_WORKCELL_GOAL
(
Type_id varchar2 (4) NOT NULL UNIQUE,
Tyle_Location varchar2 (30) NOT NULL UNIQUE,
Type_Description varchar2 (20).
KEY elementary SCHOOL (Type_id)
);Use 1 or the other column type_id;
create table COPQ_WORKCELL_GOAL ( Type_id varchar2(4), Tyle_Location varchar2(30) NOT NULL UNIQUE, Type_Description varchar2(20), PRIMARY KEY (Type_id) ); Table created drop table COPQ_WORKCELL_GOAL; Table dropped create table COPQ_WORKCELL_GOAL ( Type_id varchar2(4) primary key, Tyle_Location varchar2(30) NOT NULL UNIQUE, Type_Description varchar2(20) ); Table created
-
How to create a DVD with DVD Studio Pro and an external DVD burner?
Hello
I am trying to create a DVD with DVD Studio Pro. My internal DVD drive no longer works. I have an external DVD burner - slim portable DVD writer. I create the project into DVD Studio Pro, and when in the program, it works fine when I "stimulate". Well, I can't burn it. When I look for the external DVD writer in my finder, it is not and I don't know how or where to select the option so it is programmed to burn the external DVD writer. Any advice? Thank you have a great week.
I found a thread that has addressed this issue, but does not help me to solve my problem. Meg the dog was told this to her in question written by Scott Stark. I tried his solution of generation and format, but after pressing the burn a window appears saying "insert disc please insert acceptable DVD recordable media." I tried to use another blank DVD, it did not help. I use Word for Word, I heard that those who are the best blank DVDs, you can buy. Thanks again for your time!
-
How to create a shortcut with relative path
Hi all
I'm a Linux user, so I don't have enough experience to solve this problem.
How can I create a shortcut with relative path?
Usually it is easy to create a shortcut with the absolute path for example:
Windows accepts shortcut path with absolute c:\bin\app.exe, but he does not accept the following relative path:
.\bin\app.exeHi mbnoimi,.
Thank you for using the Microsoft Answers Forums!
To make a shortcut path parent here is a simple solution. Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
The shortcut properties.Follow these steps:
Make a new shortcut to: cmd.exe /c start.
Now, right-click on it and get the properties of the shortcut (shortcut tab).
The shortened full path must have been set to this:
%windir%\system32\CMD.exe /c start.Set the directory to "start in" (i.e. DLG) to be a relative path:
(Example for a shortcut on the desktop)
...\SendToClick on "change icon...". "and set" look for icons in this. "
"file:" to:
%SystemRoot%\system32\shell32.dlland press ENTER. Standard folder icon will probably be in the
bottom right.Now you can copy this file and simply change the "start in:" directory
to book new related shortcuts.NOTE: The steps above are just an example so try this at your own risk. And check if it works.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Urgent: how to create a shortcut with a relative path?
I put a set of files and folders nested on a server on a network location. (Use of office machines Vista; I don't know that the server is running. The files are a text file and two Office 2007 files). Users will copy this set-up files on their computer (there is a program of VBA macro in a Word document, they need). They need tomorrow (Friday) and the shortcut path gives me fits!
The hierarchy looks like:
MainDir
File.txt
SubDir1
Shortcut to the Word file
SubDir2
Word file
Excel fileI don't think even the paths associated with the shortcut until I looked a little deeper. Because I put all the files and folders together on my computer, when I did a drag - move in the folder on the server, the target properties and start in the shortcut always pointed at my computer! So now, I'm afraid that a user copy this on their machine will have a shortcut that points to ~ my ~ computer, instead of the file on their computer.
I deleted the shortcut located on the server and creates a new one from the Word file in the directory on the server. Better - I think - but it still points to the location of the server. And it is even more likely that, when the user opens the shortcut, it will try to open the file on the server, vice the file on their computer.
How can I create a shortcut to this Word file that will pick up the relative path from around where to reside? I can just click > properties and change the target and start in paths? Or do I need a VBScript or VBA?
I have to get this done fast! A kick - in the right direction is greatly appreciated.
Ed
Hi Ed,
It is not possible to create a shortcut with a relative path.
You can try the following allows to bypass and check if it helps:
Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
The shortcut properties.
a. make a new shortcut to: cmd.exe /c start.
b. now right-click on it and get the properties of the shortcut (shortcut tab).
c. the shortened full path must have been set to this:
%windir%\system32\CMD.exe /c start.
d. set the directory of "start in" (i.e. DLG) to be a relative path:
(Example for a shortcut on the desktop)
...\SendTo
e. click on "change icon...". "and set" look for icons in this file: "to: %SystemRoot%\system32\SHELL32.dll and press ENTER.
Standard folder icon will probably be in the lower right.
f. now you can copy this file and simply change the "start in:" to make new related shortcuts directory.
NOTE: The above steps are just an example, so try this at your own risk. And check if it works.
You can also read the following article and check:
Folder redirection fails when you specify the mapped network drive or the Environment Variable
http://support.Microsoft.com/kb/321805
You can check out the following link and also post your request in the Technet forum for further assistance:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
Hope this information is useful.
Maybe you are looking for
-
iPhone 7 bose headset does not when you use adapter
the head phone microphone does not work on the iphone using the adapter 7. Everyone knows about this problem?
-
There was formerly a bar with my frequently visited sites just below the search bar. He disappeared with the upgrade. How can I get that back? I don't understand the terminology in the video help
-
HP 500-281: does not start a 2nd drive cloned in sata1
HP 500-281 desktop Win 10 home BIOS MEMv80.22 Short version of the latest issue: Fine Win10 after upgrade to 10 at the start of the hd0 in sata0 slot (original). HD1 in sata1 slot is a new clone of HD0 (Win10, using Reflect). HD1 and its files in Win
-
T530, 2101: Error detection on HDD2 (Sata Mini)
I started to get this error every time that I reboot my machine. If I press boot ESC is going very well. Whats strange is that I watch have a Mini Sata HDD2 and if I do that I've never known about it and I can't put it in the Device Manager, etc.. Ho
-
8330 updating the OS version number (Verizon)
Hi guys. Can you give the link of OS 4.5 version upgrade? My BB model is 8330. The operator is Verizon. Thanks in advance.