How to create services start and stop the script of automation for different servers

Similar Questions

• Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Mr President.

  Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Concerning

  have you looked at

  http://www.Java-n-me.com/2014/02/GlassFish-extension-for-JDeveloper-12C-go-live.html

• SRM 5.8 service starts and stops

  Hi all

  I have a problem with MRS. At the beginning, I have 2 vCenters, in bound mode, with the default installation of MRS. (1:1). Now, after a long time, one of the two sites of this will not start the service. MRS. service starts and stops after a minute.

  In the paper, I see a lot of these:

  015 01-20 T 13: 30:53.532 + 01:00 [10772 connID wordy of 'QsServerSingletonCache' e09c =] Dr::QsServerSingletonCache:SetContext: context and broadcasting

  2015 01-20 T 13: 30:53.534 + 01:00 [03592 WARNING connID 'QsClient' = e09c] had wrong answer. Code: 400, Message: Bad Request

  2015 01-20 T 13: 30:53.534 + 01:00 [03592 WARNING "Default" connID = e09c] closing of transformation in unexpected state response: 3

  2015 01-20 T 13: 30:53.535 + 01:00 [error 03592 'LocalQS' connID = e09c] Exception so that Ping Server QS

  -> Std::exception QsClient::ValidationException 'class' 'Bad Request'

  2015 01-20 T 13: 30:53.535 + 01:00 [03592 WARNING connID 'LocalQS' = e09c] Ping failed: std::exception 'class QsClient::ValidationException' "Bad Request".

  2015 01-20 T 13: 30:53.535 + 01:00 [03592 info 'QsServerSingletonCache' connID = e09c] Dr::QsServerSingletonCache:SetContext: lost connection, reset the connection context

  2015 01-20 T 13: 30:53.535 + 01:00 [connID 03592 verbose 'LocalQS' = e09c] tries to connect

  2015 01-20 T 13: 30:53.541 + 01:00 [10372 info "Default" opID = 6b661b6d] CoreDump: written minidump

  2015 01-20 T 13: 30:53.587 + 01:00 [10800 "Default" info] CoreDump: written minidump

  «"2015 01-20 T 13: 30:54.568 + 01:00 [connID 10772 verbose 'LocalQS' = e09c] connection was successful, the new session id ="»

  2015 01-20 T 13: 30:54.569 + 01:00 [connID 10772 verbose 'LocalQS' = e09c] event to VC validation: {(dr.eventEx.LocalQsConnectionUpEvent)

  -> dynamicType = < unset >

  ->}

  Any idea? I tried the dejoin and join the 2 vCenters, but nothing does not change.

  Thank you very much

  Matrix

  There's your problem:

  2015 01-20 T 13: 29:51.893 + 01:00 [10800 "Default" error] Application error:

  --> There is no valid records in QS Server for this SRM server.

  --> There is no such registered provider: "45c9c008-16be-4ab3-a346-069b57837c7e." Closing...

  This means that registration SRM in the inventory of VMware somehow Service has been lost. Did you accidentally uninstall SRM or restored vCenter sauvegardΘ or something like that?

  Can you repair the installation of SRM by going to control panel-> programs and features-> VMware vCenter Site Recovery Manager-> changes installation. You go through the wizard and vCenter administrator credentials are available.

  After this operation, you may have to reconfigure the connection between the servers through the UI SRM SRM.

  Thank you

  Stefan

• Is it possible to start and stop the servers without using nodemanager?

  Is it possible to start and stop the servers without using nodemanager? If so, how?

  Hello

  Please follow the link below, it will be useful

  http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

  Concerning
  Fabian

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer.  Think of it as a broad a page roll.

  When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.

  Some printers are capable of automatic double-sided printing.  With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages.  You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• How to start and stop the APEX?

  Hi all! I am new to this forum and APEX too...

  We are runing (Version: Application Express 4.1.1.00.23)

  I need to reboot the server.

  How can I stop APEX graciously and start back after? Thank you!

  Kind regards

  Ghyslain salvation,

  to reinforce what Mike says. Apex is a database and, with the exception of the HTTP server application, runs entirely on the database. (Note with EPG, its all in the database) It contained in the users/schemas database and built items of data such as tables and PL/SQL packages. If the server that is running the Oracle database in which the Apex is installed needs to be restarted, the database must be stopped, which stops indeed Apex. If the HTTP server is also running on this server (ESS or earpiece of the Apex) then this should be stop as well.

  Of course, if your desire is not to stop the database, but to deny the user access to the Apex, perhaps for purposes of maintenance of database, then this can be done by stopping the HTTP server or by stopping the EPG.

  I hope it is clear now.

  André

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• How to start and stop the timer by using the keyboard.

  Hello, I would really like to help please, I have

  here to launch a program whereby I press a key

  which starts the timer and press another button to stop the timer, the

  delay is displayed and used to move an object on the phase on the delay dependant.

  Thank you

  Attach a listener of events on the stage of your film.

  stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

  1 if you want any key, so you don't need a key code.

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  2. If you want the same key to both use a Boolean value like this:

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == MyKey) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  }

  3. If you want two different keys

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == myStartKey) {}

  start my Countdown

  } Else if (event.keyCode == myStopKey) {}

  Cancel and reset my timer

  }

  }

  }

• Start and stop the ASM in a standalone environment

  Hello

  I installed just 11 GR 2 grid Infrastructure and ASM you have running.

  Q1. How I closed ASM correctly? So far I have

  stop the + ASM instance

  stop the listener

  However I always seem to have a number of processes that are running

  Grid1 6184 1 0 10:53?        19:00:00 /home/app/oracle/product/11.2.0/grid/bin/ohasd.bin restart

  Grid1 6338 1 0 10:54?        00:00:31 /home/app/oracle/product/11.2.0/grid/bin/oraagent.bin

  Grid1 6351 1 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmd.bin

  Grid1 6387 6351 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmlogger.bin o /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.info-l /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.log

  Grid1 6883 1 0 10:57?        00:00:05 /home/app/oracle/product/11.2.0/grid/bin/cssdagent

  Grid1 6897 1 0 10:57?        00:00:01 /home/app/oracle/product/11.2.0/grid/bin/ocssd.bin

  When I do = >

  Grid1 [+ ASM] > ASM srvctl status

  ASM is not running.

  Q2. What are the processes above, and how to close properly?

  Q3. What is the procedure for starting a ASM?

  any help appreciated,

  Jim

  
  

  Look for the command

  crsctl stop

• AS3 video start and stop the question.

  Hello

  I am new to AS3 and I'm trying to figure out how to stop a clip to play on mouse click. For now, I created a movieclip that plays when the user clicks on it, but now I want to be able to stop the movieclip if clicked again.
  At the moment, I have the following code:

  Stop();
  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  bigTree_mc.play ();
  }

  The tree animation plays very well, but I want to be able to stop it if the user click on it again.

  Any help would be appreciated!

  Thank you!

  Try...

  Stop();

  var isPlaying:Boolean = false;

  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  {if (isPlaying)}

  bigTree_mc.stop ();

  } else {}

  bigTree_mc.play ();
  }

  isPlaying =! isPlaying;

  }

• PeopleSoft Service start and stop immediately!

  Hi folks,.
  
  
  My environment: Oralce10g R2, Win XP, PeopleSoft 8.49 with MFC 9.0
  
  
  My setup is pretty good, running. In fact, I want the service to start automatically when the system boots so I configured the service and the

   Service Start Delay=600 

  , but the problem is when the systems boots and services start... it starts services and they all began they all stop immediately all especially the Apps Server... can anyone please gimme any idea what is Goin ' we here and, possibly, the cause of this.
  
  
  But I can start it manually via the psadmin hassle.
  
  
  
  Kind regards
  
  
  Texas!

  Anything in the log files? Which user are you defined the services must be started with?

  Nicolas.

• Starting and stopping the process GG

  GG admin guide I understand we can start/stop the GG (excerpt, pump, Replicat) procedures through shell scripts, and it is mentioned that it can be invoked from a script to start/stop/go. Are there restrictions on these operations?
  
  We intend to implement the process of stop/start GG in our application scenario where you need to update the source DB (and thus the target DB also) through a batch process at regular intervals (once a week, can also be less frequent). The plan is the first above mentioned stop GG process, update source DB with the latest data, transfer data to target the DB using exp/imp, restart GG treats using the SNA option after. All these steps are automated.
  
  From the tests above of initial works but don't know if GG power operation is strong enough to manage the scenarios on a regular basis and will work. Are there known issues with these operations such as disorders while implementation power which makes it unfit for use through scripts like the one mentioned above.
  
  Enjoy all the entries in the present.
  
  Thank you

  The process can be run from the command line and are just as reliable as any other executable UNIX regarding commissioning correctly if all the prerequisites are met.

  To launch the Manager from the command line
  To run the management of the control of the operating system interface, use the following syntax.
  Bishop paramfile [ reportfile]

  On the source and target systems, publishes one of the following sets of commands
  in the process, you are a beginner. Run the Oracle programs
  Directory of GoldenGate.
  extract paramfile .prm reportfile .rpt [Pei ]
  or...
  replicat paramfile .prm reportfile .rpt

  You can automate the monitoring, and it's an exercise as any monitoring process (for example, the tail of the alerts log and grep for errors ORA, logs of web server of grep, etc..). You can see extract and replicat upstairs / ongoing run, so you can also use Director (Management Pack).

• Start and stop the movie with the key

  Can someone tell me please how to do this?

  I am very new to Flash.

  Thank you

  Place this code in the script you are trying to control - pressing a key will be play/stop depending on what mode it is in.

  Stop();

  var isPlaying:Boolean = false;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUsed);

  function keyUsed(event:KeyboardEvent)
  {
  If (isPlaying) {}
  Stop();
  } else {}
  Play();
  }
   
  isPlaying =! isPlaying;
  }

  If you have any other questions, try to anticipate what you might be asked and include details.