How to create the dual boot with Red Hat Linux and Vista on Satellite A200

Similar Questions

• How to create a dual boot with Vista installed on my Satellite U400?

  Hello

  I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.

  I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
  I want to cut the partition vista in two 2 pieces to install XP Pro.
  At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).

  Is it easily to create a new partition ok (I guess only on vista)
  but is there a program dedicated to install another OS and create a dual boot.

  Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop

  Thank you
  Gerard

  Hello!

  Create a new partition for Windows XP and install it. There is no problem.

  After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
  Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
  Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.

  Now you can restart the laptop and you should have a full system dual boot to work.

  Good bye

• create the dual boot with an external hard drive

  I want to create dual boot laptop (OS 2 in 1) in my laptop, but my internal hard drive reach maximum (3) logical partition for my windows operating system 7 is not allow me to create a new logical partition install win8 pro. I've planed to buy an external hard drive and connect with my laptop and install win8 in external hard drive and use win8 and 7. Is it possible? If possible how to create? Please give me instructions step by step.

  Hi Karthik,

  If your hard drive has enough free disk space, you can install a newer version of Windows on a separate partition and keep the earlier version of Windows on your computer. It's called a multiboot or dual-boot configuration. Every time that you start your computer, you can choose which version of Windows to run. You can also install Windows 8 on an external hard drive and use it to dual boot.

  You can see the Microsoft article below for more information about this.

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-AU/Windows/install-multiple-operating-system-multiboot#1TC=Windows-7

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to create the dual boot in genuine windows 7 Home Basic?

  

  I want to install windows 8 pro in my Sony win7 home basic laptop but in my laptop cannot create the new primary partition because my laptop already have 3 primary partition (I not create it).

  My question is "can I convert *: Recovery (primary) to *: Recovery (Logical) and (logical) F: F: (primary)? and after install win8 in F: primary with no problems and use both win7 and win8?

  Hello

  Do not change the recovery partition.

  For the conversion, you can follow these articles for more information.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/convert-a-primary-partition-to-logical-disk/9b419356-98aa-4D05-b492-27b27465bf77

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-installed/m-p/742019

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• How can I configure dual-boot with Windows XP and Windows Vista?

  Vista/xp problem

  Help a friend who currently has installed vista.  What should I do if I want to dual boot with xp (not installed at the time)

  Thank you

  Hello Matthew forse,.

  Here is an excellent tutorial on how Dual Boot Vista and XP.

  Follow the information contained in the 4 pages to the letter.

  I use it in my I.T. business on client computers and recommend it carefully.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

• Create the installation of XP virtual computer which is the dual boot with Win7

  Hiya

  What is the best way to achieve this please - I can't find a definitive answer anywhere.

  I give myself a choice at startup if using Win7 or XP (default) - I'm afraid I don't remember who was loaded first.

  Any OS is chosen ends up as the C drive.

  I am running XP now and the boot.ini on the C drive only made reference to a BONE, so consider Win7 installation deals with startup ()? :

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS

  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = OPTIN/fastdetect

  I tried just to run XP Converter to create a virtual computer from the installation of XP - it creates the virtual machine, but fails on the Reconfiguration with "cannot find the volume of the system.

  What I have to change something something on the partition in the virtual machine?

  See you soon

  Craig

  Already go you as far as "Please activate now?"

  Congratulations - then fine.

  Expect this reactivation, except if you use volume licenses

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How Windows determines the dual-boot?

  I want to understand the mechanisms of multiboot.  Feel free to point me to the Microsoft links that explain this.

  How does he know how much OS bootable Windows are present?  Windows queries each partition at startup to see if an OS resides?  Or is a pointer added on the MBR as each OS is installed so that Windows should simply verify the MBR?

  Let me complicate the qustion slightly.  Suppose that disks are involved, each with a BONE or two.  If Windows asks each partition at startup to see if an OS resides, then disks does not alter.  However, if Windows stores this information in the MBR, how it works for several discs, each with its own MBR?  Windows look each MBR it can find at startup?

  Another question.  If Windows adds a pointer for each operating system on the MBR, then what happens if a BONE is removed, for example, when a partition is deleted or a diskette containing a BONE or two is physically deleted?

  Initialization information is contained in the store BCD and not the MBR.  The BCD store can be found in two locations.

  (1) hidden 150 MB system reserved partition.

  (2) in the score where the first version of Windows that you have installed. The folder is named C:\Boot and a bootmgr file name

  Whenever you install a different version of Windows (XP, Vista, Windows 7 or 8), another entry is made in the BCD store.

  How to modify the BCD store: http://technet.microsoft.com/en-us/library/cc731245%28v=ws.10%29.aspx

  An easier way to modify the BCD store is to install EasyBCD in the latest version of Windows you have installed.

  EasyBCD (free for non-commercial use):
  http://NeoSmart.NET/DL.php?id=1
  http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

  J W Stuart: http://www.pagestart.com

• How to create the energy bar with flash pro?

  Hello

  How to create an energy bar as what you see in flash facebook games, which increases with time "as every minute add 1 energy point' and reduce playing a role or a battle or just do an action?

  You can simply use a rectangular moviweclip/sprite and use Actionscript to control the width (or height), where the energy is proportional to the value of the width (or height).  You can also pair with a textfield that allows you to display the actual value of energy as it changes.

• How to create the Indesign application with vc ++

  Hello

  I want to ask that how to create Indesign application using vc ++?

  I am able to develop applications in c# using COM and generate an Interop.Indesign.dll using the Adobe Indesign CS5.5 typotheque

  I am sucessfully create instance of Indesign using this code

  Type = Type.GetTypeFromProgID ("InDesign.Application");

  Application InDesign._Application = (InDesign._Application) Activator.CreateInstance (type);

  I'm not understanding how to use COM with vc ++ or there is another method to create an instance of Indesign using vc ++.

  or

  How to use Interop.Indesign.dll in vc ++ to create the instance of indesign.

  There is no .tlb file in indesign directory by which I generate .h and .cpp file that I can use in my project.

  I want to create Indesign in vc ++.

  Thank you

  Hi, I'm not a programmer VC ++ itself, so you can't give the code, but I can give some general measures that can you can get and hopefully solve your problem.

  We can use the COM Indesign object to hunting Indesign and its functionlaity of VC ++ or c# and other. What we need to do is import tlb files in our project so that we have the declerations of the methods exposed by the COM of Indesign interface and make a call to them.

  The .tlb file is present at "C:\ProgramData\Adobe\InDesign\Version Visual Support\7.0\Resources for Basic.tlb 7.0\en_US\Scripting. You can use this to create your .h files using the #import statement.

  Once you have created .h I think that you will be able to call the methods of Indesign, of course, you will need to create an instance of the Indesign application.

  Are has some links that might be useful for you.

  http://forums.Adobe.com/message/3783210#3783210

  http://forums.Adobe.com/message/4407895#4407895

  Take a look as they discuss the issue that you are facing.

  PS: The .tlb file exists in several places in your system in order to be sure that you use the last LBR. You can search for "resources for Visual Basic.tlb", rename it, and then start Indesign (it must re-create these files that will have the latest model of the object). On Win7 launch Indesign using Admin privelages to other teas file will not be created.

  Manan Joshi

  -Effective InDesign solutions-

  MetaDesign Solutions

  http://metadesignsolutions.com/services/InDesign-development.php

• How to create the new MovieClip with front and rear images?

  I'm still a real newb... I'm unable to learn how to create a two-sided movieclip and load a different image on each side.

  Thank you!

  Mark

  You can't do that, but you can simulate it.  If you use a rotationX or rotationY you'd a displayobject that is not visible and the other is visible when you almost 90 degrees.

• How to create the View object with several editable entity objects

  I want the two entities in the view object to support the creation of new lines, but when I give create insert that it allows to insert only on the parent and not the child. I found this link
  http://docs.Oracle.com/CD/E21043_01/Web.1111/b31974/bcadvvo.htm#CEGCAJCI which replaces the outgoing class. but I would like to do declarative. Is there another way to do it?
  
  I use Jdeveloper 11g 2 version.
  
  Thanks in advance,
  Rakesh

  Hello
  There is a checkbox in the tab "Updatable" entity objects, mark it checked and look in your vo
  Then, you can create the ViewObject also editable attribute
  Make sure that the Association is here.

  Rognard

• How to create a dynamic multilingual with liquid Web site and web apps

  In the thread Re: liquid: what are the best practices suggested for several languages? that part of my problem is resolved.

  I created a list web app that contains several fields from the data source.

  These data source fields have multiple values where the customer has to choose the value of (i) there is. That is to say place: sea front area rural, etc., etc.

  These values must be translated from English into Dutch.

  So, how do I build my Web page with a liquid markup custom c.q. of entry?

  Thanks for any help.

  Kind regards

  Carla

  Hi Carla,.

  You have many options at your disposal with the liquid, so with the datasource_id of the original web application, you can call another Web application referencing this ID to get the information you need and collect the data in a collection or display in a custom template (.tpl) file.

  Here is an example. Inside of your application model web detail.html

  With the help of a collection:

  {module_webapps id = "3rdPartyWebApp" filter = "item" itemId = '{{dataSourceID}}' collection 'webAppData' =' model = '}
  {{webAppData.items [0] .description}}

  With the help of a model:
  {module_webapps id = "3rdPartyWebApp" filter = "item" itemId = "{{dataSourceID}}" template = "display_webapp_description.tpl"}

  ... display_webapp_description.tpl content:

  {{description}}

  You should be good to go.