How to create the recovery disk from image on another laptop?

Similar Questions

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• How to create the recovery disk

  Hello

  can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

  Windows 7, 64 bit.

  After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

  but it gives the following error:

  The system repair disc could not be created

  The parameter is incorrect. (0 x 80070057)

  I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

  Help, please.

  Concerning

  Maury

  I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

  FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

  Try these steps and see if it works.

  1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

  2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

  3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

  Note:

  Please backup your files before recovering on the laptop that it would result in the loss of data.

• How to create the recovery disk in Windows 8

  Original title: HELP! I need to know how

  I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop.  How can I do this? Any help would be appreciated.

  Hello

  Recovery of the system and the disk recovery options
  http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-disk

  Create a recovery USB disk
  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  Some manufacturers have integrated recovery methods to verify with the help of HP, their online
  documentation and ask questions in the forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========================

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  Get to know Windows
  http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1

  How-to: get acquainted with Windows
  http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyond

  Is a free and convenient application available on the Store - Top Free
  "Windows 8 Cheat Keys.
  http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8

  ==================================

  There is no start or the Windows 8 Start Menu button.

  Where is the start menu?
  http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menu

  Customize the splash screen
  http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1

  Windows 8 is not available classic appearance.

  3 third party programs can help:

  StarDock - Debut8 - costs 4.99 $US
  http://www.stardock.com/products/Start8/

  Free

  Classic interface
  http://www.classicshell.NET/

  Pokki
  https://www.pokki.com/Windows-8-Start-menu

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to create the recovery disk in laptop t430 running Windows 8

  Hi friends,

  I have a laptop preloaded with windows8 T430. I want to create recovery media, but I don't have the application create recovery media must be installed and I can not find available in the downloadable Web site.

  Please suggest me a procedure to create a recovery media for windows 8.

  concerning

  Vinod

  Got the answer.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?AliasID=SF12-D0247

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

  Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

  Original title: windows xp absence of 3.5 diskettes and Backup Assistant

  Hello JohnAdams2461,

  You're right, that Windows XP requires a floppy drive to create the recovery disk.
  Most newer systems do not have a floppy drive.

  View information in a previous thread with the same question.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

  Best regards, k

  Marilyn

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Satellite L - how to create a recovery disk?

  Hey,.

  I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.

  Sorry, but why did you uninstall the recovery disk creator?

  However, now you can not create the recovery disk because you have uninstalled the program to create the disc.

  The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.

  Normally you get this message if you start your laptop on first use:

  + Important INFORMATION +.
  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  shrink the volume c: http://www.sevenforums.com/tutorials/2672-partition-volume-shrink.html

  Then create a new volume u want http://www.pcandtablet.com/windows-8-drivers/1216/how-to-extend-volume-in-widows-8-and-take-extra-space-for-a-drive.html