How to create the table with the rows and columns using the layout?

Similar Questions

• How to create a table with these dimensions?

  Still new in Indesign, but I need to create a table like the one below.

  

  
  Select the text tool, I created a block of text and then insert a table. However, I'm lost as to how to change the top line for the length of the two columns from the bottom.
  I looked at the options of panel paintings, but it only allows me to change the number of lines and columns.

  All advice is appreciated. Thank you.

  You must create a table with two rows and two columns.

  To select the first line and click "merge cells".

  

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• How to create a table with two unique columns

  How to create a table with two unique columns. I use the following syntax below and I get the error message such unique or primary key already exists.
  
  create the table COPQ_WORKCELL_GOAL
  (
  Type_id varchar2 (4) NOT NULL UNIQUE,
  Tyle_Location varchar2 (30) NOT NULL UNIQUE,
  Type_Description varchar2 (20).
  KEY elementary SCHOOL (Type_id)
  );

  Use 1 or the other column type_id;

  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4),
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20),
    PRIMARY KEY (Type_id)
  );
  
  Table created
  drop table COPQ_WORKCELL_GOAL;
  
  Table dropped
  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4) primary key,
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20)
  );
  
  Table created
  

• How to create a table with no lines to the left or to the right?

  If I create a table with say 5 columns and 15 lines, how not to do a vertical line (border) to the left and to the right of the table while keeping the boundary up and down? Is that possible or I just put a white box on the left and the right?

  IDCS3

  There are a few methods that work. Here is one.

  (1) select your table cells

  (2) open the race Panel

  3) click the blue lines of the proxy image in the Panel of stoke to deselect the lines inside and high and low lines

  (4) 0 the value of the weight of the race (or change the color of the None swatch)

  

  Oh and for the love of your fellow designers or the person that allows you to edit your work in the future... do NOT use a white box to hide the traits of lines and columns in the table.

  HTH

  -mt

• How to create a table with muse?

  How can I create a table with muse?

  Muse do not support building tables at this time.

  However, you can add HTML table to the object-> the option Insert HTML code as a way to get around this.

  http://www.w3schools.com/HTML/html_tables.asp

  You can even try lining up a few text boxes with or without contour applied to create a tabular look editable in design mode.

  Thank you

  Vinayak

• How to create a table with editable column values.

  Hello world
  I think it's very simple, but I am unable to find how to do this. This is my requirement. I need to create a table with n columns and 1 line initially. the user must be able to enter data into this table and click of a button must insert the data into the database table. Also, there should be a button at the bottom of the table to add 1 line to the table.
  
  I know how to do the insertion of data, but can someone please let me know how to create a table which allows the user to enter data and how to create a line button Add 1?
  
  
  Thanks in advance!

  Raghu,

  Go through the tutorial of Toolbox Page & Advanced section of the Guide of the OFA table.

  Step 1 - you need to create EO & VO from this EO. This EO will be table of database where you want to insert the data.

  Step 2 - create an advanced table region. (See this section in table advanced for more details)

  Step 3 - attach this VO in the BC4J region advanced Table component.

  Kind regards
  GYAN

• How to create a table with auto-numbering?

  I want to create a table with a default value of column to the increase in whole number. The first thought came to me, is to use the sequence. I find in google than following create statement

  create table etl_stats1 (run_time date,arr_rows int,lid int default nextval('etl_req'));

  get ORA-04044: procedure, function, package or type is not allowed here.
  
  There are discussions described here uses the trigger to do the job. But that does not support by default in a sequence, it seems so average.

  You must create a sequence and a trigger:

  SQL> create table etl_stats1 (run_time date,arr_rows int,lid int)
    2  /
  
  Table created.
  
  SQL> create sequence etl_seq;
  
  Sequence created.
  
  SQL> create or replace
    2    trigger etl_stats1_bir
    3    before insert
    4    on etl_stats1
    5    for each row
    6    begin
    7        select etl_seq.nextval into :new.lid from dual;
    8  end;
    9  /
  
  Trigger created.
  
  SQL> insert into etl_stats1 (run_time,arr_rows) values(sysdate,99)
    2  /
  
  1 row created.
  
  SQL> select * from etl_stats1
    2  /
  
  RUN_TIME   ARR_ROWS        LID
  -------- ---------- ----------
  15:38:41         99          1
  
  SQL> 
  

  SY.

• How to create a table with spaces between the lines...

  Hello
  
  I use jdev 11.1.1.6 and I need to insert spaces between the lines. How this can be done?
  
  Thank you and best regards,
  Tarun Agrawal

  Hello

  I'm sorry to forget on the spacer. You must use css like mentioned AP.

  Arun-

• How to create a table with lines in a line?

  Hello

  I am trying to create a table that looks like this: https://Acrobat.com/#d=XyI3rlSWMWYXQixzpRSrXA but I can't understand.

  Please can someone tell how should I go about this?

  Thanks for the help.

  Hello

  We see you the nested tables, you must create a table within a table. For this first you must merge the lines and insert a table with the number of rows requested. You can find the example created for you below and let me know in case of any problems

  https://SendNow.Acrobat.com/m/g.ashx?i=rO1m-dIDzRs2FibTHDSiww&x=yrC * o4IZIVfpKgqOTbX8OQ

  Thank you

• How to create a subform with several rows initialized?

  I have a repeating subform on my form that should start with several lines initialized.

  I can create several blank lines by setting the binding "repeat subform for each data element" and set the number of 'min', but I would like to have values in one of the columns so that doesn't happen.

  I can create multiple instances of my subform named and initialize the value of the column in question, but then if I have the "repeat subform for each data item" checked I get additional dups, but the first row and the button Delete (right-click action "this.parent.instanceManager.removeInstance (this.parent.index);" ')»» and Add button (click an action "_rates.addInstance (1)" "") erratic behavior.  I mean here the button Add adds sometimes lines with values that have been deleted previously, and the delete button sometimes a warning saying something like "topmostSubform [0]: Page1 [0]: rates [10]: delete_button [0] .click on Index value is out of range.

  There is no connection to a data source where I could get the values for the column, I want to initialize.  In my opinion, I'm close, if only I could find the correct settings for the links palette.

  Thanks for your suggestions!

  If you have columns and rows, why not use a table instead of subform...

  Check the setting of binding to "repeat the line for each data item.

  Add the button 'Delete Row' to each line in the last column.

  Add the button 'Add Row' under the Table.

  Add text fields to the columns that you want the data displayed / modified by the user.

  I hope this helps.

  If not, let me know...

  Thank you

  Srini

• How to create multiple tables with SQL commands

  Hi, first of all, is it possible to create a table and then one more both with SQL commands?
  because I tried to do this in the following way
  Example:
  CREATE TABLE 'HB_Product')
  "productId" number 4 NOT NULL.
  "productName" VARCHAR2 (20) NOT NULL,
  "prodPricePerTon" NUMBER (10,2).
  "HB_Product_PK" PRIMARY KEY CONSTRAINT ("productId")
  )
  /
  CREATE TABLE 'HB_Operations')
  "orderNo" NUMBER (5) NOT NULL,
  'lineNo' number 4 NOT NULL.
  "billNo" NUMBER (10) NOT NULL,
  'actions' VARCHAR2 (15).
  'place' VARCHAR2 (15).
  "actDate" DATE NOT NULL,
  "totWeight" NUMBER (6.3).
  'HB_Operations_PK' CONSTRAINT PRIMARY KEY ('lineNo')
  )
  /
  
  I copied some of the syntax for creating the table object browser, but I preffer to use my own sql.
  It gives me an error "Missing or option not valid."
  
  Can someone explain to me how to do it properly, or why it is not possible?
  
  Best regards from Stan!

  862377 wrote:
  so you're saying I can't do several tables at the same time?

  Yes... Well,... not this way

  You can do this way

  create schema authorization alex
  CREATE TABLE "HB_Product" (
  "productId"    NUMBER(4) NOT NULL,
  "productName"    VARCHAR2(20) NOT NULL,
  "prodPricePerTon"    NUMBER(10,2),
  CONSTRAINT "HB_Product_PK" PRIMARY KEY ("productId")
  )
  CREATE TABLE "HB_Operations" (
  "orderNo"    NUMBER(5) NOT NULL,
  "lineNo"    NUMBER(4) NOT NULL,
  "billNo"    NUMBER(10) NOT NULL,
  "actions"    VARCHAR2(15),
  "place"    VARCHAR2(15),
  "actDate"    DATE NOT NULL,
  "totWeight"    NUMBER(6,3),
  CONSTRAINT "HB_Operations_PK" PRIMARY KEY ("lineNo")
  )
  /
  

  The question is: why do you want to create "at the same time? What is the harm in creating one after the other?

  some tips (maybe not desired):
  do not use quotation marks in your statement, this will create column names and the table out.

• How to create a table with a variable

  Hello world!
  
  I have a procedure that receives a table as parameter name and need to create a table using this name
  
  For example:
  
  PROCEDURE REFRESH_REPORTS (table_name varchar2) IS
  
  BEGIN
  table_name_REPORT: = table_name;
  
  run immediately "create table table_name_REPORT...
  
  But I don't get this job. I'm just add this procedure as part of a package that is used for online/web declarations.
  
  Could someone guide me how can I create this table?
  
  I was getting errors such as invalid table name, and I even tried to use a variable that stores the SQL full and concatenated to the name of the table variable, but still that didn't work.
  
  Thank you so much in advance.
  
  Nithya
  
  Published by: user645399 on January 20, 2010 21:42

  You need create a valid SQL statement in the string. And if you want to add variables in this chain, do you this through the concatenation or replacement.

  For example using concatenation

  declare
    tableName varchar2(30);
    sqlCreate varchar2(1000);
  begin
    tableName := 'funky_foo';
    sqlCreate := 'create table '||tableName||' as select * from foo@remotedb';
    -- using dbms_output to enable the display of the SQL that is about to be executed
    execute immediate sqlCreate;
  end;
  

  For example using replacement (better option than the SQL syntax is more easily readable and maintainable and allows several variables to set in the SQL model)

  declare
    SQL_CREATE_TEMPLATE constant varchar2(1000) :=
  'select
     *
  from $TABLE@remotedb';
  
    tableName varchar2(30);
    sqlCreate varchar2(1000);
  begin
    tableName := 'funky_foo';
    sqlCreate := replace( SQL_CREATE_TEMPLATE, '$TABLE', tableName );
    -- using dbms_output to enable the display of the SQL that is about to be executed
    execute immediate sqlCreate;
  end;
  

• How to create a table with strings active by Boolean button

  Hello.
  I have a problem to create a table and did not find any topic in the forum that could help me solve this problem.
  I need to create a table of alarm.
  In other words, every time an alarm has been triggered (Boolean button), the table shows the time, date and where the alarm has occurred.
  For example, when garage alarm is activated, it will be at table:

  Date / / Time / / Garage / / presence ON

  And so on, when the alarm is activated the room:

  Date / / Time / / room / / presence ON

  If anyone can help, I would appreciate it enough.

  Thank you.

  Giuliano06 wrote:

  So I can show the alarm, but when the button is not selected, it sends the null value (empty string) for the table through the registry to offset.

  Also, when I choose for example the 2 bedrooms, it is moved to another column in the table and not just below the last alarm obtained.

  My VI is attached cases someone might have an idea.

  your constantly questioning the value to your table, ofcoarse, this vi is designed according to the mechanical action of the Boolean switch...

  

• Create a table with auto increase of columns

  I remember there is a single line of SQL to create a column that can auto increase. -Does anyone know it? something like below:
  
  CREATE TABLE HAS
  (
  ID INTEGER AUTOINCREMENT
  )
  
  Thanks a lot for your help!

  Not in Oracle, no.

  You can simulate the SQL Server AUTOINCREMENT feature by

  -Creating a table
  -Creating a sequence
  -Creating a level trigger line BEFORE INSERT on the table that populates the column, i.e.

  CREATE TABLE a (
    a_id integer primary key
  );
  
  CREATE SEQUENCE a_id_seq;
  
  CREATE TRIGGER trg_a
    BEFORE INSERT ON a
    FOR EACH ROW
  BEGIN
    SELECT a_id_seq.nextval
      INTO :new.a_id
      FROM dual;
  END;
  

  Justin