How to create two employees with the same name as the vendor record?

Similar Questions

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• How to create a recovery with the Image of the DVD of Windows 7 Partition?

  My laptop got screwed that I started a month on vacation and no DVD of Windows 7 with me. I think that the best solution would be a partition with a bootable Windows 7 DVD image.

  Any suggestions on how to make a? -Nigel M

  Make a Windows 7 image and store it on a separate partition

  1. create a partition large enough to store an image of your Windows 7 installation
  2 make a Windows 7 image and save the image on this partition
  3. with the program allowing you to make the image to burn it to a bootable recovery CD Imaging
  4. If you need to restore the image, insert the CD to boot and start the restore process.

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. That will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.
  2. in the Control Panel window that appears, click the blue link to the image.
  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.
  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.
  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.
  6. once the backup is complete, you? He's prompted with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.
  7 choose which disc recording drive you? He's use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  You can also use a disk imaging hard program - they both allow you to create a rescue disk.

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Windows 7: create a Partition of Installation of system to install Windows (I nstallation Partition, not an image)
   
  (1) create a partiton of 3.5 GB at the beginning of the hard drive, then the rest of the hard disk you want to partition.
   
  (2) copy the whole DVD on this 3.5 GB partition and make the partition bootable.
   
  Open the command prompt and run the following:
   
  x:
   
  CD/Boot
   
  x:\boot\bootsect/nt60 x:
   
  (where x is your score)
   
  A message "startup code has been updated on all targeted volumes" should appear.
  Then, verify that the partition is marked "active" in disk management.
  If necessary, right-click on the partition and 'mark the partition as active.
   
  (3) upon reboot of the PC will automatically launch the partition setup and add an entry 'Windows setup' in the BCD entries. If this is not the case, change the boot with EasyBCD menu. http://NeoSmart.NET/DL.php?id=1

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to create a share with the shape of a friend

  Hello

  Anyone know how to create a form of "share with a friend"? It is about sharing a simple html page not an e-commerce site or a blog page.

  FYI a link:

  http://i-communicate.com.au/new/media-handling.htm

  See you soon

  Micha

  Found that I need to add or change the {module_siteurl) to {module_pageaddress} to refer to a specific page.}

• How to create a logo with the letters in 2 different colors

  I need help with a logo. I am trying to create a logo were it is as if a light shines on the type then part letters are in 2 different colors.

  Set the type by using the text of point tool (meaning click then type, no click-drag-release then type). Using objects of type two, one for each line.

  

  Draw the path of the light with the pen tool, fill it with yellow and move it to the back (object > Arrange > Send to back).

  

  Select the first line of text and the spotlight and go to object > clipping mask > make.

  

  Now simply select objects of type with the direct Selection (white arrow) tool and fill them with the blue wire.

  

• How to create an employee with settings information

  Hello world
  
  I have a department on the first page table, and when I choose a Department (for example the departmentid is 3001) and you go to the second page. On the second page, there is an employee table, which shows the information of the employee of the Department (3001 here). (I finish above). On the second, he is also a 'create' button which is inappropriate to the datacontrol. what I want is when I click on the 'create' button, it access page 3 which is used for the creation of a new employee. Users can enter employeeid, name, birthday, gender, departmentid and so now to create a new used on this page. But most importantly, the departmentid new employee information should be 3001 (it's on a pass from the first page, do not need the user to enter the imformation departmentid) and it cannot be changed. Could someone help me? Thank you!!!

  If you use the VO of EMP, which is under the Dept of the datacontrol node and invoke create or the top createInsert this will be done automatically for you.

• How to create a file with the 'location' visible tab

  Hello

  Recently, I accidentally deleted the videos folder. This record had the feature to appear in my "personal folder", but seen its physical location elsewhere. My question is: How can I create a folder I can show in my "personal folders" yet still have this physical place besides? It doesn't work with a regular folder since it doesn't have the 'location' tab, then how do I do it?

  Hello

  You can check the following link and try to create a new user account and check if the problem occurs or not.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Hope this information is useful.

• How to create a CD with the OEM of the WinXP operating system?

  Hi all

  I recently bought a Tecra A7 that has Windows XP OEM preinstaled. My question is: has Toshiba any tool to create the WinXP CD? If not, why so and how can I do this cleanly? I want my PC to do the tests and I probably have to format in the future!

  Thank you to
  Pedro

  Hi Pedro

  Yesterday, I created a backup image on my laptop because I want to test the new Vista and my Xp was preinstalled on your laptop.
  In any case, I used an application of Symantec Ghost. I used it several times and I think it s very nice and useful program to perform a backup and restore. You can create a clean bootable CD or DVD, or you can save the file to the image on the second partition

  I guess you don t have a Toshiba restore CD. Am I wrong?
  I have a very dedicated forum user and, recently, I have read in the forum that Toshiba offers an option for the creation of a clean driver & tools cd of Mr. perhaps you will find an option to create an image, but I don't know m.
  AFAIK you should find it in assistance under protect & difficulty tab.

  But if you want to save your picture using the program like ghost.

• How to create a package with the procedures?

  Referring by the net, I've written the following PCK file. I installed my Oracle database 11g in VirtualBox (Win XP). I can able to select tables using the query from the host (Windows 7)

  CREATE OR REPLACE PACKAGE APEX_SYS_PCK

  AS

  TYPE refcursortype IS REF cursor

  PROCEDURE GET_USER_DETAILS)

  D1 ON refcursortype,

  P_USER IN VARCHAR2,

  P_PASS IN VARCHAR2);

  END APEX_SYS_PCK;

  /

  CREATE OR REPLACE PACKAGE BODY APEX_SYS_PCK

  AS

  PROCEDURE GET_USER_DETAILS)

  D1 ON refcursortype,

  P_USER IN VARCHAR2,

  P_PASS IN VARCHAR2)

  IS BEGIN

  OPEN D1 FOR SELECT * FROM APEX. PEOPLE;

  END GET_USER_DETAILS;

  END APEX_SYS_PCK;

  /

  When I try to run the script, I get the following error. How to solve this problem? If there is an error in this package please correct!

  • Project: sqldev.temp:/IdeConnections%23vAPEX.jpr
  • F:\PACKAGES\APEX_SYS_PCK. SQL
  • Error: PL/SQL: analysis of completed Compilation unit
  • Error (1.14): PLS-00905: APEX oppose. APEX_SYS_PCK is not valid
  • Error (1.14): PLS-00304: impossible to compile 'APEX_SYS_PCK' body without its specification

  You are missing a semicolon after

  TYPE refcursortype IS REF cursor

  in the specifications of your package.

• How to create an app with space name?

  Hi all

  How to create an application with the space, for example "Hello Word" name When I run my Simulator, I got ' Hello$ 20World "instead. I use the plugin for eclipse for development. I can see the Application descriptor for my application, and it shows the thin space. I tried to change the Blackberry project properties tab generate file output name, but it doesn't help in any way. Please advise...

  Goto Blackberry project properties

  Click the general tab

  Write in title = "Hello World".

  and you can see your title of the modified project

  I hope that you ask for it only!

• When I create two keyframes at the same position between keyframes at different positions this way adds a loop. How can I get rid of the loop?

  When I create two keyframes at the same position between keyframes at different positions this way adds a loop. How can I get rid of the loop? I was just by dragging the handles on the vertex point, but I want to get rid of the loop together.

  Focus on the Bezier handles on the motion path in the Composition window. You can select the tool pen (g) and hold down the Alt/Option key to select the tool convert Vertex (it looks like a V on the side) and then fix the handle manually or click on the top of the trajectory to change it to a straight line. You can also play with spatial interpretation Keyframe.

  To avoid this, you can change the interpolation of keyframes in space to linear preferences. Most of the time I don't like straight so I keep my default value of Bézier.

• can anyone tell how to compare two documents with two controlled with the same mouse pointers

  can anyone tell how to compare two documents with two controlled with the same mouse pointers?

  Windows and OS X can only display a mouse pointer - it is created by the operating system, not the application.

• How to watch two clips at the same time on the other, with an opacity of 50% each.

  How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.

  Thank you

  PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.

• How to bridge two computers with their own operating system, Server1 to Server2 in the same room.

  Original title: bridge two segents HOW?

  Seem like MS does not explain how to fill two computers with their own operating system-> beautiful graphics and he said it's possible-> we know how to add segments to the bridge after its creation?  Server1 to Server2 in the same room.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.