How to create users that can connect to the application?

Similar Questions

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• Connection problems. Firefox is the only program that can connect to the internet, all other programs fail. Windows 7 upgrade

  Hello

  I've recently updated to Windows Vista 64-bit for Windows 7 64 bit.  After the upgrade, I noticed that Firefox is the only program that allows me to connect to the internet and surf the web.  Windows updates not connecting not (error 80072EFD) and any other program that tries to connect to the internet fails.  Also, when I install the updates to Firefox, Firefox is no longer will connect; I have to do a system restore to an hour before the updates of Firefox in order to get online.  I searched the web relentlessly trying to identify the problem and tried the steps recommended on these sites: http://www.online-tech-tips.com/windows-7/windows-7-cannot-connect-to-internet/ and http://social.technet.microsoft.com/Forums/en/itprovistaie/thread/8777663d-013c-47b8-b11a-0e890612b533 and http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/32593406-f0af-449d-9cfd-3be3827fbf30

  Help, please!

  Start with http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet

  You may encounter temporary connection [e.g. 0x80072EFD] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  For better assistance, post in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• APEX5: How to use User(Logged In) Image throughout the application

  Hello

  We have images (BLOB) user stored in the custom table, now, when the user opens a session, we wanted to use his image on several pages in application as in reports, forms.

  Question is how we can use a single image across the application, without reloading or Access database again.

  I thought I ODP and hiding the image in the ODP. Then store the URL in the overall page element to access the image in any of the application but it seems that ODP is drawn for each page and giving the database image. Best way to do this?

  Any thoughts?

  Thank you

  Ankit

  Ankit-K-Oracle wrote:

  We have images (BLOB) user stored in the custom table, now, when the user opens a session, we wanted to use his image on several pages in application as in reports, forms.

  Question is how we can use a single image across the application, without reloading or Access database again.

  I thought I ODP and hiding the image in the ODP. Then store the URL in the overall page element to access the image in any of the application but it seems that ODP is drawn for each page and giving the database image.

  The ODP does not cache the image Explorer.

  • Have you implemented the ODP using a Cache-Control header, as described?
  • Did you check the cache settings in the browser?
  • Have you used a web inspector to determine if the browser is in charge of the image from cache or asking for each page view?

• How to craete a user who can only browse the dashboard?

  Hi friends,
  How to create a test user that can only browse the dashboard and not able to modify reports using answers?
  
  Please tell me the steps.
  Thank you

  Bob,
  Add groups to the RPD, sort users into groups either in the RPD directly or using init blocks in a GROUP variable. Create groups presentation with the same name and users inherit automatically the member ship providing that the names are the same.

• VMware View 4 - looking for a version of Linux OS that can connect to VMware View

  I would try a Linux operating system that can connect to the VMware View 4 environment that configure. Well, now I want to load a Linix OS on a PC and have it connect to view desktop computers work all Windows PC. Is this possible? If so, what flavor of Linux do I need?

  Please post links to downloads of versions of Linux.

  Thank you

  All Linux distributions are free...

  I'm pretty confident that it works with CentOS, although I have not tried myself as I executed him the VMWare View Open Client on Mac.

  Twitter: thevirtualguy

• Can connect to the IPSec VPN, but can not see the internal network

  I have several users that can connect to our rooms of ussing IPSec VPN on a 5505. I have a user who can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same configuration that can connect and see the internal network. Newspapers in ASDM show the link, but do not seem to show any errors trying to access internal. Any help will be greatly appreciated. Thank you, Bill.

  Add...

  ISAKMP nat-traversal crypto

• Draw the users currently connected to the Application

  Hello
  I want to see the list of users currently connected to the Application.
  
  I had put the Option 'Sign-On Audit' profile to the level of "Mule".
  
  Now I am tracking in the database using option "security: users-> monitor ' and yet the below sql query. I get a different output of two channels.
  
  Select distinct fu.user_name User_Name, fr. RESPONSIBILITY_KEY responsibility
  of fnd_user fu, fnd_responsibility en, icx_sessions ic
  where fu.user_id = ic.user_id AND
  Fr.responsibility_id = ic.responsibility_id AND
  IC.disabled_flag =' no AND
  IC.responsibility_id is not null AND
  IC.last_connect such as sysdate;
  
  Please let me know how to check the users currently connected to the application and their connected at the time.
  
  Thanks and greetings
  Amith

  After successfully completing the 'Purge Signon Audit' request I tried to track users, it shows all users connected to the Application today. He does ' t display the users who are currently connected to the application server.

  This is expected behavior since you have "ic.last_connect such as sysdate;" in your query. If you want to check the users that are connect in the latter in the past (15/30 minutes or 1 hour), please refer to:

  Note: How 295206.1 - Total number of users connected to ORACLE Application
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295206.1

• users and internet accounts. -Account that a single user can connect to the Internet at the same time

  When I am connected to the computer, and I 'switch user' other user accounts, cannot connect to the internet, unless I have complelty "log off." How can I fix? I should be able to stay connected with the windows open, so I can continue when I get back.

  I should be able to stay connected with the windows open, so I can continue when I get back.

  It depends on your network, there'S no connection.  For example, it could certainly happen to a user who was logged only under that user.   However, in this case instead of completely disconnected the first account you could probably have the first account log out and hang up the connection.  Then the second account probably could dial and connect.  FWIW, I think a DSL PPPoE user might see similar symptoms.

  Robert Aldwinckle
  ---

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• How to create users in OTM

  Hi all
  
  I can't get the hang of creating users in OTM. When I go to Oracle ATS administrator, I can only configure users for the database from the OLT.
  
  How to create users in the OTM database?
  
  Rgds,
  Blu

  Hi Blu
  You must change the default database when you log into the admin page.
  There is the connection & field pwd but also the drop down menu you can choose the database that you want to manage.

  It may be useful
  See you soon
  JB

• How to inform users that pay is underway

  I would like to know how to warn users that pay is being processed.
  
  for example, we have different users doing data entry for the different branches of the company payroll and payroll Admin wishes to inform all users that it is processesing of payroll for the pay period. So, how can we do such a thing? As in the case, the user connects by using his username and password a warning message should appear that payroll is processed.
  
  all comments/suggestions are welcome!

  This can be solved with the following approach.

  1. create two responsibilities - payroll Admin & payroll data service with similar menu.

  2. fix the responsibility Admin pays the payroll Admin user who is permitted to run payroll.

  3. fix the responsibility of maintaining data on payroll for users in various branches that are allowed to be updated / payroll data entry.

  4. until payroll Admin began to run the race of payroll, it will define the value profile of ' HR:Query only Mode "Yes for the responsibility of maintaining data on payroll. So now users in different industries can only view data but can not create / update the data.

  5. once the payroll run is completed, payroll Admin will now be no. profile, so that users of branches can now enter data.

  6. you should make it a policy that users in the various branches must use responsible for maintaining data on payroll to enter / update payroll data even if they are responsible "Pay Admin" attached.

  Hope this has solved your problem.

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• Home wireless network users can no longer connect to the internet via router, but can connect to the network

  Modem Arris Touchstone telephony Windows Vista on PC, router Linksys WRT54G2, Netwk disk, Set netwk as private.

  My father's home network no longer works. All Pc's are running Vista. DSL is connected to the Modem Arris. Modem is connected by ethernet to the LinksysWRT54G2 router, that is connected to the PC. Other Pc is able to connect to the local network, but not to the internet. Main PC connects to the internet with a separate connection. See the other PC on the network. Daddy has no save the password and can not get him out of Linksys.

  Never mind. After 6 hours I fixed it. I don't know how I did it, but I think it was because I have unplugged and pressed the reset button on the modem for 10 seconds.