How to cut a clip and export using the same file format
I use CS6 on a Windows 7 system. I have a MB 304, 8 HR record from a workshop that I put on recently and I would like to extract the different sections of the workshop in their own files.
Here's the info from the source file:
Type: MPEG Movie
File size: 304,0 MB
Image size: 1920 x 1080
Frame rate: 5.00
Audio Format: 16000 Hz - compressed - Mono
Project Audio Format: 32000 Hz - 32 bit floating point - Mono
Total duration: 07; 35; 20; 25
Pixel format: 1.0
My ideal solution is to delimit work areas that cover the section I want to extract and then export it to the target file by using the same parameters as the source file.
So far, the resulting files have been considerably larger than the source file, so I hope that there is a simple way that I'm missing.
THX!
So, can you go down to set rates manually? It's been a while since I used CS6, but I think that the option was there... and something you can do to help, is to say MediaInfo on your computer...
Media Info: https://mediaarea.net/en/MediaInfo
Drag & drop your clip on that, it will tell you the exact wrapper and the codec used, including the bitrates & such. You will know exactly what your current clip is this way. Build a preset to match.
Neil
Tags: Premiere
Similar Questions
-
Photoshop CS4 - is - does anyone know how to find out if two people use the same file?
Photoshop CS4 - is - does anyone know how to find out if two people use the same file?
Yes, I assumed that was the case, and I thought that this link addressed to her. I would have thought it was more a function of your network and the OS than Photoshop.
-
We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.
Thank you so much: D
ON both phones, check the settings > phone > call on other devices > Off.
-
How to record the numbers and words in the same file
Hello:
I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."
Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:
Initial position X 1000
final position X 2000
space 100
But idon't know how to save the words and numbers in the same file.
As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)
Thank you for your attention
Hi bitxor.
You can use all the functions of the WriteTotext file to write strings to a file.
Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...
BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!
-
Original title: M2TS
I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?
Hello
The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.
Codecs: Frequently asked questions
WARNING OF THIRD PARTY
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. -
Hello, I'll soon change my computer, how to uninstall Lightroom 6 of the former and re - use the same license on the new?
Hi stefblub,
You can uninstall Lightroom from the control panel (Windows)
And for MAC: go to Applications folder > Ouvrezledossier Adobe Lightroom and double-click on uninstall Lightroom.
When on the new computer, download and install Lightroom from the following link: Download Photoshop Lightroom
Kind regards
Tanuj
-
Re: Satellite L735 PSK0CE: WLan and BT use the same frequency
Hello world
I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth
Can you help me with this problem?
Thanks in advance
Post edited by: aku - aku
Hello
WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.
-
Help, please... I need to know how to crop my video segments? I also need to know how to make several clips to run at the same time by dividing the screens? How to fade a clip?
I watched the video tutorials. I need to know also how to add additional video tracks to my screen. Any help please?
-
Mixture of Photoshop mobile app. How can you save an edited photo in the same file as the original?
Hey there Mopi2!
Currently, there is no way to save your new image instead of the original image. For now, you need to manually delete the original. It is however a great request! Please share with the team by typing "give us feedback" in the app menu (tap on the app icon in the upper left corner of the screen while inside the app).
Let me know if that helps!
-Kathleen
-
How oracle 10.2.0.5 Patch using the response file
Hello
OS linux
Oracle 10g DB
my project team plans for oracle 10.2.0.5 PSU upgrade on top of oracle 10.2.0.4 on Linux platform.
can someone share how to make PSU installation using the .rsp file...
Thank you
Sam.Comment of those who, like like below in the .rsp file and try it.
#MYORACLESUPPORT_USERNAME
#MYORACLESUPPORT_PASSWORD. / runInstaller-silent - responsefile /ora/Disk1/response/patchset.rsp DECLINE_SECURITY_UPDATES = TRUE
-
Clients vpn AnyConnect and cisco using the same certificate
Can use the same certificate on the ASA client Anyconnect and cisco vpn ikev1-2?
John.
The certificate is to identify a user/machine rather than the Protocol, then Yes, generally 'yes' you can use the same certificate for SSL/IKEv1/IKEv2 connections.
What you need to take care of, it's that said certificate is fulliling Elements of the Protocol, for example implmentations IKEv2 is 'necessary' particular KU are defined and client-server-auth/auth EKU are defined on the certificates.
M.
-
I have a limit of bandwidth at the office... Therefore impossible to download here. Download of coffee and who need to come back and install it on my desktop! :/
In addition, after the trial... I'll be able to download the whole CC software and install it on the desktop as well?
Have you tried to install after CC effect by using direct download? If Yes, then you can use the same installer, otherwise you would have to download it again. Another thing is, you need internet access to activate the creative cloud.
-
I have a system where Windows 7 is installed, and I'm doing a clone of her image of HARD drive, I then want to use in my main with VMware PC, so that I can start Windows 7 at the cloned disk.
I used Ultimate Boot CD v5.1.1 with which HDD I wanted to clone, and I cloned using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HARD drive was 250 GB in size which had 3 partitions, while the USB HDD I have attached to the system, which was supposed to be the disk of destination/clone, was 320 GB in size. I chose to create a replica, exact and up to 250 GB of data (partitions, etc.) has been copied exactly, and the rest of space was not allocated. I have now connected this USB HDD to my main PC, shot to the top of VMware Workstation 8 and defined a new Virtual Machine and chose to boot from the USB HDD.
The result is that when Windows starts (from the cloned HDD inside VMware), I get the blue screen error until I get to the login screen.
How can I change my methodology so that Windows starts even on the clone? I can change the tools I use, etc.
You can use the usb drive is
you only need to patch the system a little registry
to do this, you start the virtual machine with the usb drive in a restore win7 CD, and then follow the instructions I posted here
http://sanbarrow.com/p2v2008r2.htmlPatching - easy Variant
This procedure is used when otherwise the VM would start in a kind of bluescreen 7B.
This means that VMware is the target and that you configure the computer virtual with VirtualHardware type 7.
It applies only if the virtual disk is configured like this
scsi0.virtualDev = "lsisas1068".
scsi0:0. FileName = "imported.vmdk".On the platform target start the virtual machine, newly created in the Windows 7 recovery CD.
After the initialization is complete, click CMD and run regedit.
Select HKLM, then Menu > file > load hive.
Navigate to the Windows directory on the virtualdisk > system32\config and select the file SYSTEM.
When asked for a name enter p2v.
Then find the keyHKLM\p2v\ControlSet001\services\LSI_SAS
and the startup type of the REG_DWORD value 0
Select HKLM\p2v, and then click Menu > file > unload hive.
You can now close regedit and restart.
The next time you start, you can start in the 2008 R2 system. He should find the drivers and probably need to reboot when finished. -
How to scramble several images and faces in the same time
I hold many faces in a video I am change the blur.
As far as I know, I can only blur a face/image using the tool of censorship.
Is there a simple way to blur more than one image/facing the same shooting video?
Thanks a lot for your help!
My best,
Nick
ONCE we duplicated the layer stack, blurred the bottom layer and then cut mattes with borders rounded through the lower layer.
-
How to make a portable USB drive use the same drive letter all the time
Original title:
I have many removable hard drives from Toshiba. Use them for photography. I usually connect simply, transfer photos from the DSLR camera (images raw, very big, not a camera point/rod). When I plug in, computer automatically selects a player... F, g, H: by M or N.
Then, I use Adobe Lightroom for adjustments. Once they are imported into Lightroom it keeps track of this record, they were on.
PROBLEM:
If I unplug the removable hard drive, plug in at a later date, computer can randomly choose a different example M instead of H letter.
LightRoom is so impossible to find photos/images. I would then have to re - import and start any setting completely from the beginning.Question:
How to direct the computer to select the same drive when I plug in a removable hard drive.Plug in a hard drive removable, computer selects H:, can I import into LightRoom, I disconnect the removable hard drive, a week later I want to make adjustments more photography, connect the removable hard drive and FORCE/DIRECT COMPUTER TO SELECT H: AGAIN (or whatever of the original letter was).
Hope it makes sense.
Jim
Hello
There is a way to assign a static drive on an external USB drive letter, so you always get the same drive letter for the drive.
Click on the following link and follow the steps to change a drive letter.
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter
I hope this helps.
Maybe you are looking for
-
Airport Extreme cannot connect with KoboAura ereader and Beloit airplay 12 speaker
Airport Extreme cannot connect to KoboAura ereader and a speaker of 12 airplay of Beloit.
-
Seems the missing driver, help?
Hello
-
looking for Win XP sata driver
I have a Vantec sata/ide to usb 2.0 that I am using, but I have XP machine a window. It only comes with the Windows 98 driver. Is there anyone who can tell me how to get an updated driver? Thank you
-
Alltel HAUWEI question internet connection
I contacted Alltel, which is where I get my wireless internet service and spoke to the Advanced Technology Department. And there is something missing in my Windows XP, what they say, so I can't launch the wireless internet. He told me that it can n
-
where can I find a free and easy program to open files of type RAR
I need a program that downloads and opens trust them type RAR is free and easy to perform