How to cut the ssd

Hello

using win7, just put a new ssd drive, activated in CMD, trim

execute automatic compensator or I run manual, I don't have an option of defragmentation that I know that I shouldn't use, defragmentation is set so it does not work, please help, some guys talking about using an optimization option, I can't find it on my laptop.

all the best, bluesfloyd

http://www.TomsHardware.com/answers/ID-1875012/SSD-showing-computer.html

http://www.Samsung.com/global/business/Semiconductor/minisite/SSD/global/HTML/support/faqs_02.html

What should I do if the BIOS does not detect my SSD? (1) BIOS may fail support the SSD if it is obsolete. Please update the BIOS to the latest version.
(2) your system may not detect the SSD if the SSD is not properly connected. Disconnect the cable and reconnect.
(3) when there is a problem with the SATA Port, BIOS may not detect the SSD drive. To connect to a different Port SATA SSD and try again.

What should I do if I don't see my SSD in Device Manager?

(1) your PC can not Autodetect the SSD; Do a search for new devices in the Windows Device Manager
(2) when it is hot, plug-in for each port in the BIOS settings is set to Off by default, Windows may not detect the SSD drive
Restart the system, enter the BIOS and go to the SATA Configuration menu to ensure that Hot plug-in for each port is set to 'enable '.
-How to enter the BIOS for different motherboards:
GIGABYTE--> F12, ASUS--> F8, ASRock--> F11, Biostar--> F9, MSI--> F11, Intel--> F10
(3) when the SSD is not correctly connected, the system may not detect the SSD drive. Disconnect the cable and reconnect
(4) when the partition has not been set, it can cause failure in the detection of the SSD
Go to Device Manager to set up a partition, format the drive, and then restart.
-Management > Disk Management > select SSD > partition it and format it in place

Tags: Windows

Similar Questions

  • Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

    Hello

    After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

    Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

    How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

    Any help is appreciated.

    Thank you

    Bob

    Hey @llebrez,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

    The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

    If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

    I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • How to cut the plan of $118.4 (hk) per month?

    How to cut the plan of $118.4 (hk) per month?

    Cancel your membership Adobe Creative Cloud

  • How to cut the great movie for download on YouTube

    In my Finder, in all the films, there is a video, I want to send on YouTube.  However, the original is very big at 1.64 GB (or at least that's what says "Get Info" in the Finder).  I already tried to divide the movie into 4 parts using the Trim function, but even in this case, each segment is between 300 and 420 MB each!

    Is there an easy way to divide the film into several parts, each of them being the maximum size accepted by YouTube?  I could call and then with part # s for download on YouTube. Not sure, but I think that YouTube has a max of 25 MB per upload to film?  So I guess I'll end up with way too many pieces, LOL.

    I could erase parts of the film strip, but I'm not familiar with the process and have "cut" never the movie of "front-end" or the "back-end" (well Yes, I said, I'm not an expert).   Bottom line: I want to get the movie in its entirety on YouTube somehow.

    All advice welcome.  The film is already 4 years old and I did not understand this in order to share with the family.

    R

    https://search.Yahoo.com/search?p=compressing%20video%20Files%20mac

    How about do your own research online for the You Tube tutorials for how to use the iMovie version you have on your OS X 10.6.8 iMac and how to edit clips make movies shorter and weaker in the size of the file.

    The discussions and the answers you need are too detailed tedious to cover in a forum for troubleshooting.

    A lot of YouTube videos for you help with your film questions of edition.

    You just need to look for the tutorial iMovie, you need.

    You had 4 years to do your own research on how to change your own created movies.

    YouTube has a lot of video tutorials to help you with this, and you can play these video the long while real using iMovie to make the tutorial!

    Good luck to you.

  • Portege R500 - how to replace the SSD?

    Hello

    1. I have trouble using the recovery CD. The computer to read the CD once and give me an error message that it cannot partition the SSD drive. Ask me to restart the PC. Then I insert the CD change once again, the sequence of boot on the CD, but now, the computer does not recognize the recovery CD. Now, the freezing of the PC after start.

    2. I have a legal windows vista CD I tried to install in the PC but I'm not a clean install because the computer does not read the CD

    3. I tried the CD in another computer. I insert the CD to reboot and the computer immediately went to the wizard of microsoft vista.

    4. I tested the CD rom and it works.

    5. I believe that the solid state SSD laptop drive has failed.

    I opened my laptop to check what I need to buy the brand SSD. However, is the first time that I change a SSD drive and I don't know where he is and how to replace. So, if someone can answer with the steps of how to do to replace the SSD I will appreciate it.

    Thank you
    Nils.

    Hello!

    In my opinion, it could also be a problem with the CD/DVD drive. I mean you have tried another drive and the computer laptop doesn t read this disc too.
    So for me it sounds like this drive is also defective.

    But as Akuma said you should also check the SATA Mode in the BIOS.

    I think the best way would be to contact you nearest ASP. They can check a defective hardware for laptop parts and Exchange. If your laptop is under warranty, repairs are free.
    The ASP s list that you can find here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Qosmio X 500-122 - how to replace the SSD drive?

    Hello

    My 64 GB is really small, because I have a lot of software to run on it.

    Could you tell me:
    -What SSD drive adapts to this computer?
    -How do I change it?

    I tried to get help from the Toshiba support but you don't even have an answer.

    Thank you in advance for your help.

    FF

    Hey Buddy,

    All disks are placed on the underside. This means that SSD and HDD can be exchanged if return you the laptop and remove the cover from the SSD/HDD which is fixed by two screws. If you remove these screws, you can exchange the SSD.

    All SSD 2.5 are compatible. The laptop supports the SATA interface so there is no capacity limit and you can buy each SSD. Also there is no certain brand you have to buy because everything will work.
    As far as I know OCZ and G.Skill make good SSD.  :)

  • Pavilion Touchsmart all-in-One: how to install the SSD in Touchsmart F234? What form factor is necessary?

    Will be HP 20-f234 enhancement by replacing the HDD with SSD.  Two questions:

    1. is there a video (or even a set of complete step by step instructions would be) Bay of any place that illustrates how to get the HARD disk inside?  (Remove screws, etc.)

    2. what form factor SSD is supported?  That is, will I need an adapter of some sort support if I have a 2.5 SSD "?

    Thank you.

    Seems to be a 3.5 "desktop drive

    How to replace the hard drive

    http://support.HP.com/us-en/product/HP-Pavilion-20-all-in-one-desktop-PC-series/5359028/model/5365334/document/c03690508/

    Your support page

    http://support.HP.com/us-en/product/HP-Pavilion-TouchSmart-20-F200-all-in-one-desktop-PC-series/5359028/model/5365334/how-to

  • How to install the SSD for Inspiron 14 3452?

    Hello - I think I'm over my head here. I just bought the laptop 3452 Inspiron 14 model with 32GB of HDD MEM. I opened the back of the box, thinking it would be relatively easy to install a SOLID-STATE drive. However, I see is an empty slot for the HARD disk with no pins for the SSD to enter. Don't know if there is anything else I need to open? I could not find instructional videos and am afraid to do great thing with this. Please help, of course I am a novice when it comes to these things. I already used a SSD drive as external storage solution, but wanted to install this time around within the laptop.

    Thank you in advance!

    I am amazed how little information there is on the web about this: I bought this machine for the use of the lamp from my laptop main goes through a process of repair.

    I saw this on the black that deals Friday for 160 taxes included and made the big jump... I thought: I will modernize the HARD drive with a 250 GB drive I have lying around and I bump the ram to 4 GB.

    To my surprise:

    There are 1... Yes a SINGLE SLOT of RAM. and there is an opening for the HARD drive but no cable. After further review, I came to the conclusion that it is indeed not possible or viable to improve the storage on this machine. Yes, I stripped the computer down to his mother, and it's like they took the entrails of a 10 windows Tablet and put them on a laptop cover.

    So, I had a few spare parts lying around and I got a 8 GB SO DIMM that I decided to try:

    Worse: the bios bump the RAM up to 4 GB as his as he goes.

    Best screenplay: the bios will recognize 8 gb.

    To my surprise it worked with the set of 8 gb... it is a great improvement, but not stellar.

    Here is something that you can do to make this laptop can be used:

    1 - get a 4 GB or 8 GB SO DIMM, (go with 8 If you don't care guarantee, those who are for losers anyway)

    2. - are subject to the creator of windows media (internet) and install a windows own 10. too much bloatware installed on this humble machine.

    3 - buy a card SD 64 and install apps in there.

    and there you go here! a laptop USD 160 with an upgrade of the 30 dollar DIMMs and one card 64 GB sd to work its magic.

    Hope this helps

    Best regards!

  • How to cut the lines to get the circular edge?

    Membership-Class-5.jpg

    New Members Clas-01.jpg

    What I'm asking is how do my lines have this circular edge like the inside of these lines... I'm sure that its some pathfinder tool where you put a circle on the top lines but I can't seem to find the right order to get this look... Any advice?  P.S. I'm still tweeking the colors and the others then... AND the largest circle is the one that I was trying to use to cut the lines...

    Combine your lines

    Draw a black circle on top (black will be your color to make invisible things)

    s

    Select both

    Transparency > make opacity mask, use these settings

    Note: there are 2 squares in the transparency palette.

    Left square highlighted (as shown above) - edit art

    Humble square highlight - modify the mask

  • How to cut the column data

    Gurus in the morning

    I have two tables with the data in the corresponding column, BUT I need to cut the columns in a table
    the data is displayed as follows in table xpq_log
    LOG_DATE                     LOG_PTR     LOG_HDR
    01/06/2011 00:00:00     0609pro     0609IN002C_06
    04/06/2011 00:00:00     0609pro     0609IN002C_06
    05/06/2011 00:00:00     0609pro     0609IN002C_06
    06/06/2011 00:00:00     0609pro     0609IN002C_06
    07/06/2011 00:00:00     0609pro     0609IN002C_06
    09/06/2011 00:00:00     0609pro     0609IN002C_06
    10/06/2011 00:00:00     0609pro     0609IN002C_06
    12/06/2011 00:00:00     0609pro     0609IN002C_06
    01/06/2012 00:00:00     0609pro     0609IN002C_06
    02/06/2012 00:00:00     0609pro     0609IN002C_06
    03/06/2012 00:00:00     0609pro     0609IN002C_06
    06/06/2012 00:00:00     0609pro     0609IN002C_06
    07/06/2012 00:00:00     0609pro     0609IN002C_06
    08/06/2012 00:00:00     0609pro     0609IN002C_06
    09/06/2012 00:00:00     0609pro     0609IN002C_06
    In the table of printpdf as follows
    PDF_REPORT     PDF_DESCRIPTION
    IN002C                     STOCK FILE PURGE - PRINT WH CONTROL
    How can I cut the column data (log_hdr) to match column (pdf_report)?

    Any help will be much appreciated

    user11978142 wrote:
    Yes the code always starts with an alphabetic character and always ends before the underscore character and the prefix is always digital.

    And Yes to the second comment WRT 1 to many relationship.

    WRT the duplicates I want the info displayed even if there is no matching printpdf

    You talk a LEFT OUTER JOIN, then:

    See the example below (the statement are just to reproduce the paintings, just use the last query):

    WITH xpq_log AS
    (
       SELECT '0499SYS003A_06' log_hdr FROM DUAL UNION ALL
       SELECT '0612PV410W1_06' log_hdr FROM DUAL UNION ALL
       SELECT '0609IN002C_06' log_hdr FROM DUAL UNION ALL
       SELECT '2201PA100D1_30' log_hdr FROM DUAL
    )
    , printpdf AS
    (
       SELECT 'SYS003A' pdf_report, 'STOCK FILE PURGE - PRINT WH CONTROL' description FROM DUAL UNION ALL
       SELECT 'PV410W1' pdf_report, 'Description 2' description FROM DUAL
    )
    SELECT a.log_hdr, REGEXP_SUBSTR (a.log_hdr, '[[:alpha:]][^_]*') AS pdf_report
         , b.description
      FROM xpq_log a LEFT OUTER JOIN printpdf b
           ON pdf_report = REGEXP_SUBSTR (a.log_hdr, '[[:alpha:]][^_]*');
    
    Output:
    LOG_HDR        PDF_REPORT     DESCRIPTION
    -------------- -------------- -----------------------------------
    0499SYS003A_06 SYS003A        STOCK FILE PURGE - PRINT WH CONTROL
    0612PV410W1_06 PV410W1        Description 2
    2201PA100D1_30 PA100D1
    0609IN002C_06  IN002C                                           
    

    Kind regards.
    Al

  • How to cut the film to the size of the mask?

    Hello

    I always use the trial.  The difficulty in finding ways to make something simple.

    I have a rectangle of mask and I want to cut the film to her.  I can't find a command to set.

    Thank you

    There is no such thing. Your mask is your pad. It does not change the physical size, it only masks the unwanted pixels. It's just how it works. If you come in on the adaptation of the model to your images, you can still do. Select the region limited to the bottom of the comp Viewer, then position the rectangle that includes your film. You can choose cultures of the region of interest in the Composition menu.

    Mylenium

  • How to make the SSD intel for the express purpose of starting applications on Vista

    Hello

    start the passage of the hhd to ssd?

    You have a problem. I installed an ssd intel in the express purpose of starting applications and vista X 64. I tried the drive cloning, but wouldn't start. I tried a new install and it was going to move files into that, won't boot from either by car, but win wonder what version of the win even he wants me to start from and restarts any computer to the same query form. The SSD is disabled in the bios to get the boot. Had to disable the RAID to use trim to ssd so function.

    What I want to do: start just from the ssd. The only things I want written on this disc are applications or the os updates/fixes. Want to earn for knows to go for hard drives for data, and make all other write here.

    Is this possible... or what I am doing wrong? BTW due to config sata raid or ide Diane to get started.

    w/thanks... Duke

    Hi ssdprob,

    I suggest you to install the SSD as a stand-alone drive and do a clean format installation.

    When installing, do not select the SSD. After completing the installation adds the old hard drive in the system.

    Note: If you have Sata or Raid enabled, so make sure you have the drivers available for the same thing. During the installation, you may need to install the drivers, otherwise choose IDE to proceed to the installation.

    IMPORTANT: before attempting an installation format for Windows Vista on the SSD, make sure you also have a good backup of all the information stored on your computer, because this process completely removes the previous installation and the data stored on the system.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forumand let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to cut the telephone alert melody?

            Alert.mute(true);
            Audio.setVolume(0);
    
            if (SUPPORT_VIBRATE) {
                Alert.stopVibrate();
            }
            if (SUPPORT_AUDIO) {
                Alert.stopAudio();
            }
            if (SUPPORT_MIDI) {
                Alert.stopMIDI();
            }
            if (SUPPORT_BUZZER) {
                Alert.setBuzzerVolume(0);
                Alert.stopBuzzer();
            }
            if (SUPPORT_ADPCM) {
                Alert.setADPCMVolume(0);
                Alert.stopADPCM();
            }
    

    The above code work great on Pearl, but I still hear the ring operating on OS4.2.x 88xx

    I want to mute phone tune for the specific phone number when calling from.

    Mute

    public static void mute(boolean newMuteState)
    

    Activates / deactivates the device between mute (volume 0) and the strong State and persists the current volume level. Any call to setVolume() overrides the current mute State. Any subsequent calls to mute (false) returns the amount to the cached value.

    If newMuteState is equal to the current state of mute, this method does nothing.

    Parameters: newMuteState - if true, cut the device; Otherwise, returns the volume to the value before muting. Since: JDE 4.0.2

    Its seems to call Alert.mute (true) == Alert.setVolume (0);

  • How? Cut the rectangle object

    First of all, sorry for my English, I'm from Holland.

    I don't have a lot of experience using Indesign, but for my work, I have to do 1 small business using Indesign.

    Have a look at the photos, I have to make circles, with a transparent background (not this one purple) of the png. The size of these png were the same as the purple rectangle (640 * 88).

    I want to cut out the parts of the circles that are outside the rectangle, so that I can copy directly in photoshop (after all completely transparent purple rectangles).

    I hope you guys can help me

    voorvertoning.pngnormaal.png

    If you group objects circle you cut and 'paste' in the rectangle that will act as a mask, but not actually cut the circles.

  • How to cut the text of a group of Clip?

    Hello

    I am very new to Illustrator, I appreciate any help you could give me.  I use Illustrator CC.  I created a form composed and then used as a mask to cut out an image for the form so that the vector image is the context in which the form I created.  Now I have the text on parts of the form, and I would like to cut the text of the compound shape.  That is a hole through the object in the form of the text.  Also, I should probably note that the object I want to cut the text on is considered as a' Clip' in the layers panel.

    I tried a number of different options that I found on the forums, etc, but none seems not to work.  So far I have tried:

    1. conversion of the type of a sketch, then selecting the Clip group and type and then by a compound path.  The result: a startup error "cannot make a compound path.  A compound path is unable to combine with a regular path clipping mask. »

    2 Select the type and the Group of Clip and then using much less prominent in the Pathfinder Panel.  Result: An error message stating "the filter yielded no results.  Please select two paths that intersect. »

    3 select the type and the value at 0% transparency in the transparency Panel then selected the type and group of Clip and then tried the difference and Exclusion.  Result: Nothing, but transparent type.

    I enclose a photo of the object and the text I want to cut him and also the layers panel.

    I'd appreciate any help I can get.

    Thank you

    Michelle

    CMC_snapshot4IllustratorHelp.png

    Michelle,

    What happens if you go back to the objects in the first picture with the direct Type and:

    (1) select all instances of three Type and group them.

    (2) select the Group Type and group in the flyout palette (Panel) transparency and Clip click the opacity mask making with Clip and mask Invert unchecked (if this sounds wrong to change these options, it should work with those when you have black Type)?

Maybe you are looking for