How to declare a pointer to the element of structure, i.e. the table structures

Similar Questions

• How to store data points in the table

  I'm new to labview and I am trying to store the output of the frequency of 'measures pulsed VI' in a table, add everything together and divide by the length of the array. I don't want a table of numbers to be shown on the indicator. Just average 25 numbers.

  Basically, I want to do, but in labview.

  arrayIndex = 0;

  for (int i = 0; i)<=25;>

  {

  NewData = somedata;

  MyArray [arrayIndex] = newdata;

  dataAvg = dataAvg + myArray [arrayIndex];

  arrayIndex ++;

  }

  dataAvg = dataAvg / 25;

  I have attached my attempt, but its probably a very poor attempt. (The N on my first loop for was 25 when I tried to run the VI)

  Thanks in advance

  You need n number of bed DAQmx to take the average of the number n of steps of the pulse. Silly to take 500 what whatsoever when you have a single DAQmx reading which returns a single measure. As I said, you can use a registry to offset or point-by-point inside the loop. Or, run a number n of the acquisition of times with a loop and moves the pulse measurement in the table for automatic indexing and calculate an average, when all acquisitions are made.

• How to add 2 points on the Noel e? I don't have a 2nd series of digits to the right of the keyboard.

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  Wednesday, April 23, 2014 23:25:53 + 0000, RobertNortonWZ wrote:

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  You mean you want the e character? These two points are called a
  umlaut. You do not add points; the e with points is another
  a simple e character. There are several ways to get this
  character, but a simple is to hold the ALT key and type 137.

  As a point of information if you are interested, the subject of a
  umlaut is to indicate that the second of the two successive vowels is
  pronounced separately. So the word 'book' is pronounced buk, but the
  Book name is pronounced BO - ock.

• How triggers can be created in the table?

  Hi all
  How triggers can be created in the table?
  is 12 or as far as we can?

  There is no technical limit to the number of triggers you set (or, at least, not one that any rational person has never touched). He usually would not make sense to have more than one trigger of a given type on a particular table, even if you can come up with situations where you can have multiple triggers of the same type on a single table.

  Normally, when people ask this question, it is because someone (foolishly) he asked in an interview. Frequently, the interviewer is trying to determine if you know how many types of triggers there is no if you know if there are some esoteric limit on the number of triggers.

  Justin

• How to get a list of the tables more fragmented in Oracle?

  Is there a SQL on how to get a list of the tables more fragmented in the Oracle DBMS?

  Update the statistics on the table and try this, you should see very fragmented tables upstairs with high wasted_space.

  select table_name,round((blocks*8),2) "size (kb)" ,
                              round((num_rows*avg_row_len/1024),2) "actual_data (kb)",
                              (round((blocks*8),2) - round((num_rows*avg_row_len/1024),2)) "wasted_space (kb)"
  from dba_tables
  where (round((blocks*8),2) > round((num_rows*avg_row_len/1024),2))
  order by 4 desc
  

  I changed the query a little because the ORDER BY will not work if we concat | ' Ko ' with the column because this makes the output a character column data.
  And added a WHERE condition to see that these tables where the total size is greater than the actual size of data.

  Published by: zahid79 on July 23, 2010 13:40

• How to configure subdomains pointing to the folder of your site

  I am trying to determine if it is possible to implement a series of subdomains such as each points to the content in a folder in your site with the URL of the pages showing the sub-domain without the name of the subfolder.

  The case in question... If I have a Web site to say with subfolders mysite.com.au, dir01 and dir02 which contain each pages I have to show in what concerns subdomains. I created sub02 and subdomains sub01.

  Is it possible to have my work site of BC as I can reference a page, let's say page01, in the subfolder to be displayed with the name of subdomain as sub01.mysite.com.au/page01 rather than see it as mysite.com.au/dir01/page01

  I know I can do the homepage for the subdomain to a page in the folder, but it still shows the subfolder in the url - I want the pages in the subfolder to be associated with the subdomain and show/use url based on the subdomain without reference to the subfolder.

  Is it possible and if yes what is a simple process or complex to implement?

  Hi Ricardo,

  In addition you don't no need to do it at all, especially with the liquid to get what you say... This isn't what Greg asks however. He doesn't want the subfolders.

  Hi Greg, because it's not true accommodation separated, you can't configure it in British Colombia as your request, such that a page will always sit in a folder. The only way to achieve this is to make sure that all of your pages to sit in a root and named differently.

• How to dynamically add columns to the table

  Hi all

  I'm new to ADF and need help on sub condition.

  We have created a ViewObject on the EMPLOYEE table that has under columns:

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER,

  BUSINESS_UNIT

  COUNTRY

  GCODE

  We need to create a page in the ADF with employee table to show only below the columns

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER

  Later, if necessary user should be able to add other columns to the page dynamically.

  Can you please advice on how to implement this feature.

  Thank you.

  Kind regards

  Vidya

  Hello.

  There could be a simple solution, which is to use the component PanelCollection.

  Drag ' drop your VO to a page and create a Table with all the attributes.

  For columns that emp_id, emp_name, cost_center, set the Visible property to false.

  Put the PanelCollection component on your page and drag your table inside.

  When you run the page you will see the view menu in the upper left corner of the table above. You can show/hide columns in this menu.

• How to create faster index in the table of 500 GB

  Dear Experts,

  I have to create 20 index on table data-ware house. This table is of size 500 GB.

  freshen up this weekly chart using the external table.

  creating 20 indexes on this table consumes a lot of time.

  I have 40 GB of ram on 2012 box windows with 8 processors.

  I installed 11 GR 2.

  I have 4 drives C D E F

  for AN index, it takes 4 hours

  
  

  I added enough space to the tablespace

  I put the tablespace in a drive D:\
  

  
  

  I'm under control to create indexes below

  create index  X_3_INVEN_ITEM_ID_IDX  on   X_3_PV_TD_2 (INVENTORY_ITEM_ID)  parallel 32 nologging;
  
  

  output long ops

  SID, SERIAL # CONTEXT SOFAR TOTALWORK LESS TARGET % _COMPLETE TIME_REMAINING

  ---------- ---------- ---------- ---------- ---------- ---------------------------------------------------------------- ---------------------------------------------------------------- ---------- --------------

  108 10 0 3758 140973 Rowid Scan AD range. X_3_PV_TD_2                                    2.67            256

  173 23 0 5279 141470 Rowid Scan AD range. X_3_PV_TD_2                                    3.73            258

  114 6 0 10092 141786 Rowid Scan AD range. X_3_PV_TD_2                                    7.12            261

  99         59          0      46283     325908 Sort Output                                                                                                                     14.2          15207

  68        214          0      46763     323623 Sort Output                                                                                                                    14.45          14973

  35         93          0      47531     318364 Sort Output                                                                                                                    14.93          14570

  164         70          0      45058     288506 Sort Output                                                                                                                    15.62          12886

  227         31          0      44130     282285 Sort Output                                                                                                                    15.63          13011

  13          3          0      51890     309515 Sort Output                                                                                                                    16.76          12874

  222 67 0 28837 141380 Rowid Scan AD range. X_3_PV_TD_2                                    20.4            343

  73 37 0 32472 141488 Rowid Scan AD range. X_3_PV_TD_2 22.95 212

  47 8 0 34332 141154 Rowid Scan AD range. X_3_PV_TD_2 24,32 202

  176 20 0 35197 141161 Rowid Scan AD range. X_3_PV_TD_2 24.93 205

  19 7 0 35239 141325 Rowid Scan AD range. X_3_PV_TD_2 24.93 205

  80 4 0 40399 141611 Rowid Scan AD range. X_3_PV_TD_2 28,53 193

  144 20 0 44960 141481 Rowid Scan AD range. X_3_PV_TD_2 31,78 182

  233 101 0 74086 169228 Rowid Scan AD range. X_3_PV_TD_2 43,78 176

  128 165 0 78765 141436 Rowid Scan AD range. X_3_PV_TD_2 55.69 173

  235 1 0 41199796 70035728 table Scan AD. X_3_PV_TD_2 58,83 19804

  199 6 0 52748651 70035728 table Scan AD. X_3_PV_TD_2 75,32-9709

  44 2 0 53686039 70035728 table Scan AD. X_3_PV_TD_2 76,66 9022

  204 26 0 119969 141464 Rowid Scan AD range. X_3_PV_TD_2                                   84.81             40

  202 48 0 138880 162276 Rowid Scan AD range. X_3_PV_TD_2                                   85.58             43

  17 33 0 126506 141778 Rowid Scan AD range. X_3_PV_TD_2                                   89.23             28

  48 7 0 137772 141360 Rowid Scan AD range. X_3_PV_TD_2                                   97.46             15

  Temp tablespace

  
  

  USED_MB USED TOT_MB % NOM_TABLESPACE

  ------------------------------ ---------- ---------- ----------
TEMP 11533 286719 4.02

  temporary tables

  OWNER SEGMENT_NAME SEGMENT_TY TABLESPACE_NAME EXTENTS BYTES_
---------- ------------------------------ ---------- -------------------- ---------- ---------------
AD 156.1601650 TEMPORARY USERS 96 209,715,200

  Question:

  How to fix this?

  (a) run several parallel create sqlplus statement index different sessions

  (b) create a tablespace to put data files in different hard drives like D: E: F: C:

  (c) create the separate tablespace for each hard drive and map it to a single disk IO benefit

  (d) I have 8 processors but parallel 32 is not speed

  (e) how these clues I can run in parallel. Is it OK to run 20 parallel index 32 sqlplus sessions

  All that I have to create 20 index on the table of 500 GB

  target memory = 30GB

  index of names to create 20, each index is 10 GB

  his is of 80 hours (4 hours per index)

  This machine is waiting, I just used all the resources of the machine to accelerate.

  Thanks for reading this

  Thanks for the help in advance

  I was talking about your end of issue speed up construction of index, where I proposed

  orclz >

  orclz > alter session set workarea_size_policy = manual;

  Modified session.

  orclz > alter session set sort_area_size = 2147483647;

  Modified session.

  orclz > create index

  Post edited by: JohnWatson

  Sorry, I misread it: this question was not from you. My apologies. My solution should work for you, however: give yourself a big PGA, manually. Automatic PGA management using not will never give you enough.

• ADF: How to get all rowKeys for the table displayed in the page

  Hello

  I have table "COMPANY" where the 'COMPANY_ID' column is the primary key. I created a page simple jspx with:

  (1) a text entry to accept new IDs of company

  (2) Insert button.

  (3) af:table which displays all available in "SOCIETY" company ID

  When the user tries to enter a company code that is already present in the table I want to compare with the keys of the row of the table displayed below and if it's an already existing, I would like to send a friendly message for the user and put an end to the movement.

  So, how to extract all line keys to compare?

  Thanks in advance.

  Here's a way to check if you use the OperationBinding exception class:

  operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ()) {}

  There is an error

  List errors = operationBinding.getErrors ();

  Browse the list of hollow and see if there is an exception of your restrictions

  }

• How to import a legacy in the tables of the apex data

  Hi all

  Please tell me how to import data inherited in tables of the apex.

  Thank you and best regards,

  Rambeau

  SQL workshop Utilities Data workshop...

  You can import data from previously exported in the form of data (text, csv, xml)

  Note: the table name and the column name should be equal if the already existing table table.

• How to find null values in the table

  Hi experts,
  
  my version is oracledb10g:
  
  I am doubted simple.
  
  for example:
  
  create table ex1 (e varchar2 (20));
  
  Insert ex1 (null).
  
  insert into ex1 (e)
  
  number of will be: 2
  
  I can easily find the value "e".
  
  so my question is:
  
  How can I find null values in the table and I want to remove the null values from the table.

  ADF 7 wrote:
  Hi experts,

  my version is oracledb10g:

  I am doubted simple.

  for example:

  create table ex1 (e varchar2 (20));

  Insert ex1 (null).

  insert into ex1 (e)

  number of will be: 2

  It depends on what you expect. If you issue count (*) you ask Oracle "how many lines there. If you issue a County () you ask Oracle 'how non null values for are there. "

  ADF 7 wrote:

  I can easily find the value "e".

  so my question is:

  How can I find null values in the table and I want to remove the null values from the table.

  delete from 
  where  is null;
  

  Ideally you would simply place a NOT NULL constraint on the column in question, thus prohibiting NULL values into the system (assuming that your business needs, it is that the column MUST always have a value).

• How to set current row in the table after use the button tab on inputText

  Hi all
  My first post.., I am beginner in ADF and I'll try to explain my problem.
  
  For now we use ADF 11 g (11.1.1.4), in a jsff page I have a table with a column of inputText.
  On the the inputText valueChangeListener, I invoke a method in a bean viewScope that call an EJB method, make some services to the EJB on the modified line. After that, I update the VO and the table (because other values in the row have been changed) and reset the focus on the inputText even modified by the user with javaScript, because the focus was lost after updating.
  So far, everything works fine.
  
  When I use the arrow keys to change the selected line in the table, this is excellent work (focus is always in the inputText next or previous), but if the user tries the key tab allows you to change the current line, the inputText on the line that has the focus, but the current row in the table is not changed (I think that is normal).
  
  My question: How can I change the current line after the tab key in this case?
  
  I don't know if it is really clear, not easy to explain, do not hesitate to ask for more details.
  Thanks in advance.

  Hello

  My question: How can I change the current line after the tab key in this case?

  Use a client event to listen to the keyboard entry and intercept the tab. Use af:serverListener to call the server to set the rowKey on the table and deliver a PPR for the table to repaint

  See example 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples

  to learn more on how to use the client listener and the receiving server

  Frank

• How do find no data in the table

  Hi all
  
  I have 250 table in my diagram and when I query like this
  
  Select * from object where type_objet = 'TABLE' and owner = 'MATTELLI.
  order by object_name CSA
  
  
  Some tables have no data in it. How to find the tables that not have data or records
  
  Thanks and greetings
  Srikkanth.M

  Hi Srikkanth,

  First of all, if you are only interested in object TABLE type, so you should better use dba_tables instead of dba_objects.
  Then, assuming that your statistics are up to date, it would look like:

  SELECT *
    FROM all_tables
   WHERE owner = 'MATTELLI'
    AND num_rows > 0
   ORDER BY table_name ASC
  

  Otherwise, you can go with a subquery and a 'select count.

  HTH,
  Thierry

• How to get multiple rows in the table is displayed on the form

  I am looking for a way to get more table rows that appear on the form.  I created a table with a header and a line with the add-in and remove button option.  I like how the sample purchase order form has it setup in the designer it shows one line and it appears on the form so the table has three rows to start with.  How do I do that?  I looked at the code on the sample and I couldn't find it anywhere.  Please help, thanks.

  Hello

  I have an example here in the construction of a dynamic array markets.

  http://www.assuredynamics.com/index.php/category/portfolio/building-dynamic-tables/

  You must select the line and then go to object > Binding palette and set it to repeat. You can set the minimum and initial number to what you want.

  The form should be saved in a dynamic form of XML in the Save as dialog box.

  Also the page must be set to Flowed, so that as the table grows, push another object down. In addition, you need to configure the paging settings so that the flow of the page as the number of lines is superior to a single page.

  Give a start and if you need more help,

  Niall

  Ensure the dynamics

• How to publish a data in the table from another table

  Oracle forms6i
  
  Hai All
  
  I created a form in order to generate traffic. I had a problem that I can post that two data
  
  I have two tables, a table is created dynamically the data in the tables are extracted from the text file, and they are divided and stored fields are
  
  Bartime Bardate barcode
  
  000011 0815 01/08/2010 - it came
  
  000012 0816 01/08/2010
  
  000013 0815 01/08/2010
  
  000011 1130 08/01/2010 - he goes for a break
  
  000011 1145 01/08/2010 - it comes once again in
  
  000011 1650 01/08/2010
  
  000012 1655 01/08/2010
  
  000013 1645 08/01/2010 - it home
  
  That I need to transfer this data to the database table, the table name is dail_att and the fields are
  Code bars, timein, timeout, breakin, escape, day like I need like this
  
  Barcode Timein Breakin Breakout Timeout Attend_date
  
  000011 0815 1130 1145 1650 01/08/2010
  
  I tried to use some service number and rank of count, but it does not work Pls I give good solutions
  
  The encoding is
  
  
  declare
  The CNT number;
  bar_code varchar2 (25);
  date of bar_date;
  in_time varchar2 (25);
  out_time varchar2 (25);
  intr_intime varchar2 (25);
  intr_outtime varchar2 (25);
  
  Cursor c1 is
  SELECT count (*), barcode, bardate, bartime
  -ROW_NUMBER() over (order by bartime) RN
  of temp_attendance
  Group of barcodes, bardate, bartime
  
  order by bardate;
  Start
  To r1 c1 loop
  -Select the barcode, bardate, bartime
  -ROW_NUMBER() on the partition by barcodeorder by bartime: nurse
  -of temp_attendance
  -the Group of barcodes, bardate, bartime
  -order by bardate;
  
  If (cnt < = 1) then
  Select the code bar, intimate, intrtimein, introuttime, outtime, attend_date in bar_code, in_time, intr_intime, intr_outtime, out_time, bar_date from dail_att where attend_date = r1.bardate - 1;
  
  Update dail_att set outtime = r1.bartime where attend_date = r1.bardate and barcode is r1.barcode.;
  elsif (cnt < = 2) then
  insert into dail_att(barcode,attend_date,intime,outtime)
  values (R1. Barcode, R1.bardate, min (R1. Bartime), Max (R1. Bartime));
  -other
  -update dail_att set outtime = r1.bartime where attend_date = r1.bardate and barcode is r1.barcode.;
  end if;
  
  End loop;
  forms_ddl ('commit');
  exception
  while others then
  forms_ddl ('rollback');
  message(SQLERRM|| dbms_error_Text);
  message(SQLERRM|| dbms_error_Text);
  End;
  
  
  
  
  Thanks and greetings
  
  Srikkanth.M

  You seem to always have the same problem, but give it different titles. It would be much easier that you would hold a thread open until its resolved. The last time you had this problem that I posted the following code, it didn't help you? (Replace x and y in each if or ELSIF with the calendar you want to watch)

  CURSOR cr IS
    SELECT CODE,
           DATE,
           TIME
      FROM FROM TEMP_ATTENDANCE
     ORDER BY CODE, DATE, TIME;
  BEGIN
    FOR rec IN cr LOOP
      IF rec.TIME BETWEEN x AND Y THEN
        -- Update record for last day
        ..
      ELSIF rec.TIME BETWEEN x AND Y THEN
        -- Update record
       ..
      ELSIF rec.TIME BETWEEN x AND Y THEN
        -- Update record
       ..
      ELSIF rec.TIME BETWEEN x AND Y THEN
        -- Update record
       ..
      ELSIF rec.TIME BETWEEN x AND Y THEN
        -- Update record
       ..
      ELSIF rec.TIME BETWEEN x AND Y THEN
        -- Update record
       ..
      END IF;
    END LOOP;
  END;