How to deploy eggs which is having vService dependence using PowerCLI

Hello

I'm deployment VIO OVA VMware OpenStack - 1.0.0.0 - 2567172_OVF10.ova using power cli

The only problem I have is that, after that deployment does not start because of this (vCenter Extension Service).
Is it possible to define the type of PowerCLI (or any other CLI?).

Then that same manual deployment of vspehre (web client /desktop client) deployment succeeded without providing any additional setting/configuration...

Feed the CLI Version: 6.0, ESXi and vSpehere 5.5

Tools of the FVO has worked to solve the problem of dependence vservice.

Tags: VMware

Similar Questions

  • How to read the content .vmtx of the file using PowerCLI

    Hi all

    I have a virtual computer model in one of the NFS attached to my ESX host data stores.
    I need to get the display name and some other details of the vmtx this model file.
    Any method to get values from vmtx file using PowerCLI... ?

    Thank you in advace for all help.

    Hello, MattGeorgey-

    One way you could do this would be to use the Copy-DatastoreItem cmdlet to retrieve the .vmtx file, and then you can read it, Get-Content on it, etc., as you please.  Something like:

    ## copy the VMTX file from the datastore to a local spotCopy-DatastoreItem vmstore:\MyDatacenterName\my_datastore_name\myTemplate\myTemplate.vmtx C:\temp\.
    
    ## get the contents of the VMTX file$colVMTXContents = gc C:\Temp\myTemplate.vmtx## get the line that contains the "displayName" value$colVMTXContents | Select-String displayName
    

    And, you can access some of the elements that are specified in the file .vmtx using the property Config.ExtraConfig of the display of the model as object:

    ## get the template object$tmplMyTemplate = Get-Template myTemplate## get a particular value for an ExtraConfig item$tmplMyTemplate.ExtensionData.Config.ExtraConfig | ?{$_.Key -eq "nvram"}
    

    How do I?

  • I need to free up space, how do I know which programs I don't use

    How can I find out what programs I don't use as I free up space

    Hello

    you are the only person that knows programs that you use and that you do not use

    be very careful what you delete or uninstall

    read this to free up disk space

    see if this program helps you to determine what is take up space

    http://www.Jam-software.com/treesize_personal/

    by default system restore will have up to 15% of the capacity of the hard disk

    you would like to reduce this amount

    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

    http://www.vista4beginners.com/system-restore-space-used

    also use disk cleanup

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    also scan for malware

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    and read these information from microsoft on windows optimization

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  • If I have DirectX 9.0 c installed next to directx11, how would I know which one of them is used by my games

    and why older games cannot run on dx11?

    Still, this depends on the game. There are games available on the market supporting the two DX9 or higher. If your card does not support DX11, then the game will run in DX9 mode. The game will run in mode if DX11 video card (which is obvious), and if the game supports.

    Most games newly released these days have graphics options that can be modified to execute to the highest possible setting and at this point in time if the game is DX11 compatible, it would be in the same mode.

    I guess that should completely answering your query?

  • How do I know which elements have not been used

    Hello

    I'm a noob, but get the hand of it. Here's my question: I started with about 20 video files (2 h of images). All the files, I created about 60 "subitems" carefully conducted in a bin. Then I doubled all the 60 clips one by one. However, I accidentally deleted one of these clips in the middle (and cannot cancel because it was some time ago) and I don't know which clip is has.

    What I want to do is to select the tray with the subitems to 60 and identify the one that (perhaps more than one actually) have NOT been inserted in my sequence. Is it possible to do? Similar to Excel when you select a formula and it indicates what cells was in charge, could I select my sequence and it tells me that the clips are 'in charge '? Any other suggestions?

    Thank you

    There is a "Use of video" column in the project window.  This should show you that it isn't currently in your sequence as well.

  • How do I change the option of guest OS using PowerCLI

    Hello

    I want to be able to change the PowerCLI guest operating system setting for a virtual machine.

    I'm sure that there is a way to do it, but I him have not found easily in the API.

    Thank you

    Ionut

    You should be able to do the Set-VM cmdlet with the ID parameter.

    Something like that

    Get - VM MyVM | Set-VM - ID 'windows7_64Guest '.

    You can find the valid values in the VirtualMachineGuestOsIdentifier enumeration.

  • How can I tell what version of Actionscript I use?

    I really apologize in advance for this question, but as someone new to Flash how can I know which version of Actionscript is using my .fla file?  1.0, 2.0, or 3.0?  I'm using Flash CS4.

    Go to the file menu-> publication settings... and click the Flash tab, there you will see what script version that you are using

  • Is there a way to specify the static IP address for deployment EGGS in the ovftool command?

    Hello

    I'm trying to deploy EGGS using ovftool. I see the option - network and - net available for the selection of the network by name, although I wasn't able to find a way to assign a static IP address in the ovftool command itself. Something like - ip0 = 10.10.10.10. Is there a way we can do that? User interface when we deploy an OVA, we have available to provide IP address, gateway, DNS and network mask.

    Thank you

    Hello, vPupil-

    If the ovf/eggs is created to have definable properties, as an IP of the machine, you can use the "-prop ' parameter to ovftool.exe.

    By literature ( http://www.vmware.com/support/developer/ovf/ovf20/ovftool_201_userguide.pdf), is the syntax to set a property:

    --prop:

    It is near the bottom of page 24, as well as an example.

    To see if the ovf/eggs that you are using has configurable options, you can use ovftool.exe in mode "probe" (page 25).  Just issue the command with only one source, no target, as such:

    > ovftool.exe myAppliance.ovf
    

    This should generate the results of the probe, which should list all configurable properties, including their 'key '.  This key is what you use with the "-prop" parameter.  In the example of probe on pages 25-26, the FVO has two properties, 'db - ip' and 'ws - ip ".  Then you should be able to specify values for these properties by adding the following to your ovftool order:

    ... --prop:db-ip=10.10.10.10 --prop:ws-ip=10.10.10.11 ...
    

    How does do for you?

  • P3K49EA: How do you know which wireless adapter you have?

    Hey,.

    I was looking at the Wi - Fi drivers for this specific unit but for many other portable, I can find the drivers for the network for a series of adapters Wi - Fi, like Intel, Realtek, and Qualcomm.

    Many times, a way to solve the problem of falling of the internet is now by installing the last Intel Wi - Fi and Bluetooth card, but there are other drivers for the cards made by other manufacturers, how do I know for sure that my device has a processor intel Wi Fi adapter?

    I don't know that, in some cases, you can check back and see exactly which wireless adapter you have, but who are these dependent region?

    For example. each laptop, Pavilion, envy and water courses that are sold to the United Kingdom, all have an Intel wireless adapter? and if it was a laptop computer with an AMD processor and chipset?

    Really looking forward to hearing from you guys.

    Thank you

    Steven

    I suspect that you have installed the Realtek wired ethernet driver and Intel wifi driver. Only the driver for the hardware you have installed. In fact, the tag on the laptop won't tell you much. If you look to the top of the support page for your specific model, it will show the drivers for all the optional features available in this series of models. And Yes, the wireless cards can be region-specific. The regulation on radio communication varies around the world. That's why several wireless drivers are listed, some of which you can't use. Unless you are having problems just use office supplies Windows driver. If there is a problem, it may be necessary to know your specific hardware so that you can find a more specific driver from the manufacturer's Web site, or you can search the Internet for other people having a problem with this specific device and use other suggest drivers. I hope that this is a logic.

  • How to deploy target (Crio) shared variable configured RT chassis, NOT of LIBRARIES

    I have a PC, connected to a switch RT target (Crio) THROUGH 5 port host.

    I want to be able to run a program on the host computer, that will load and run a RTexe on the target of RT.

    However, I want to be able to load and run different RT exe, which have different chassis configuration variable. Scaling, PWM DIO, ect... may be different from one program to a program for different channels.

    I know how to deploy libraries, but how do I Deploy/undeploy the chassis configured static variable?

    Hi teslaaaa,

    The attached photo, it seems you're looking for your e/s Scan Mode programmatically. We have a white paper section that deals here. The first section of the article discusses discovered by program your I/o modules, which you will get a reference to your modules. Then you will be able to configure the modules with nodes of this reference property.

    Let me know if it helps!

  • How to remove system tool without having to pay for anything anyone to remove it?

    original title: remover tool system

    How to remove system tool without having to pay for anything anyone to remove it?

    The first three ways I listed:

    • Do a web search for the name of the program, which should be implemented in sites that show how to remove.  For example, there are many guides of withdrawal to BleepingComputer.com
    • Update and run your antivirus program.
    • Download and run Malwarebytes' Anti-Malware , a malware removal program specialist who is particularly good to remove rogue security programs .

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • If I get a data execution prevention message, how can I find which program has been interrupted?

    If I get a data execution prevention message, how can I find which program has been interrupted?

    Hi Robhofm,

    Usually the Data Execution Prevention (DEP) automatically monitors Windows programs and services. You can increase your protection by having DEP monitor all programs.

    For the program being stopped by DEP, you will receive an error message indicating the cause of the stop and the name of the program.

    For more information you can consult.

    Data Execution Prevention: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

    See also:

    What is Data Execution Prevention?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-prevention

    This refer below link provided to change the DEP settings.

    Change Data Execution Prevention settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have the FBI Cyber Virus on my administrator account my pc & need to know how to remove it immediately without having to pay to do so?

    I have the FBI Cyber Virus locked on my administrator account my pc & need to know how to remove it immediately without having to pay to do.  I already know that he is infected with this virus, even if Microsoft Securities said that the pc is in green.  When I log on my administrator account, it stops at my opening page & load the page of the virus, which claims to be the FBI Cyber Division, & demanding pay me $300.00 to unlock my ACCT.

    I need help right away, because I don't know how to remove this virus, without getting ripped off for pay records, etc. to remove.

    Hello

    Please go to the Microsoft Community Forums.
    From the description of the question, we understand that you want to remove the virus from the computer.
    We can imagine the inconvenience you encountered.
    Let me go ahead and help you with the issue.
     
    You did changes to the computer before the show?
     
    I suggest for the link and follow the steps in the article:
    How to remove a computer virus?
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    How to back up and restore the registry in Windows
    http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • How to deploy the project to my weblogic Server Application?

    How to deploy the project in my weblogic Server Application? Wouldn't be great if I copy the folder of the project to the root of the ACE?

    Also, how should I call Javascript context help assuming the project deployed to Weblogic As.

    I use Robohelp 10.

    Thanks in advance.

    Hello

    You generate to help and then you copy the output generated on the server.

    For sensitivity to context, which is output are you using? Try the following

    pages for more information:

    Take a bow

    Willam

  • How to deploy the business on Oracle Application Server rule

    OPA dear team,


    We have a requirement in which we integrate the OPA with BPEL. We must define the rules of modeling tool Oracle policy and deploy it in Oracle Application Server.We will then that wsdl and call the rule of BPEL partner links engine. By default the Oracle Policy modeling tool deploys for tomcat. Ask your input about how we can deploy on oracle application server.

    Thank you
    Anand

    bwolff wrote:

    So my question is how to deploy a rulebase.zip a determination server that runs on Oracle Weblogic Server 11g?

    Thank you
    Brian

    Normally, an application server will expand the war for the web application file works from the expanded location. When this is the case, you can deploy a new one simply by copying the module zip file in the directory WEB-INF/classes/rulebases .

    However, Weblogic is not extend the web application, there is no directory to copy the file zip of modules on.

    It is possible to run the determinations under weblogic server so that you can deploy a new modules without restarting the server of determinations. There are two technqiues to achieve this.

    1. you can manually unzip the .war file somewhere that the weblogic server can see locally and then deploy the .war file expanded as the determinations server web app. If you do that you can deploy a new modules by copying the zip file in the directory WEB-INF/classes/rulebases to this place.

    2. it is possible to specify a rulebases directory that is not in the web application. In this case, it should be a place the web application can be done locally. You can deploy a new modules by copying the rulebase.zip file to the location specified modules.

    You specify a different directory to search rulebases by setting a java system property: determinations.server.rulebase.dir.

    Example of

    -Ddeterminations.server.rulebase.dir=/some/other/dir/rulebases
    

Maybe you are looking for