How to detect the backlight is on?

Similar Questions

• How to disable the backlight on the keypad for the Qosmio X 70-A-120

  Please, do you know how to disable the backlight on the keypad for the QOSMIO X 70-A-120?

  Concerning

  Open "assist Office > function key" and you will find the option of keyboard backlight. Change in status OFF and t should be disabled.

  Check it out.

• How to detect the window closing event and to do some tasks before leaving

  Hello

  Someone knows how to detect the window closing event and to do some tasks before leaving?

  Sridhar

  Structure of the event allows to detect the window closing event. In the structure of the event,.

  Select this VI-> close round table for this task. See attached picture.

• How to detect the sign of a number?

  I output which gives the number of negative or positive. My problem is how to detect the sign of the Boolean number and output? For example if the input number is negative as - 23.11 I want to output the value false and if the number is positive as 17.99 I want to output true.

  T H A N K S!

  Test if the number is greater than or equal zero.

• How to detect the key ALT pressed in os7

  Hai,

  How to detect the key ALT pressed in Os7...

  Can I use the source for os 7 as below? ,

  protected boolean keyStatus (int keycode final, time final int) {}

  If (Keypad.key (keycode) == Keypad.KEY_ALT) {}

  ...

  Returns true;

  } else

  Return super.keyStatus (keycode, time);

  }

  and also I want to know which is the return of this method? In detail
  How to detect the other touches also?
  What are the updations or changes in the code, on os6 os7?

  KeyCode is a bit model, if you use "is" to compare you won't get accurate results, you should use the operator '& '.

  See
  http://supportforums.BlackBerry.com/T5/Java-development/detect-ALT-and-shift-key-clicks/Ta-p/444976

• How to detect the number of created quickobjects

  How to detect the number of quickobjects created? quickobject are quickbox2d.

  Basically, I have a timer that will countdown to 4 seconds and it will create a falling ball, it will get removed when she falls down. However, I want only there so that if more than 5 bullets are in step, it will cease to create until it is less than 5 to start creating some balls again. Is there a way I can do?

  It's the timer to create the ball

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (TimerEvent.TIMER, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

  check the length of _balls_array.  If it is greater than 5, do not create another bullet:

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (IMER TimerEvent.T, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  If (_balls_array.length<>

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

• How to detect the color pages in a PDF file?

  I use a plug-in of Acrobat C++ read/modify a PDF file.

  I need to get the total number of pages in the PDF file and the page numbers of the pages in color.

  So far, I was able to get the total number of pages using PDDocGetNumPages() with no problems.

  However, I can't find an API that lets me know if a particular page is color or not. Is there a way to do this?

  Thanks in advance!

  But what happens if there are RGB data which means black or grey (R == G == B), that means black or RGB?

  There is a code sample in the SDK to browse content in the PDF file, and then you can get the color space and color of each object.

  But you really need to do background research on the colors & spaces to achieve this properly.

  From: Sachintha81 [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Wednesday, February 8, 2012 16:57:10-0800

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Topic: How to detect the color pages in a PDF file?

  Re: How to detect the color pages in a PDF file?

  created by Sachintha81http://forums.adobe.com/people/Sachintha81> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/4194889#4194889

• How to detect the operating system to PDF using javascript

  Hello

  How to detect the operating system to PDF using javascript. (Javascript console)

  Thanks in advance.

  App.Platform will return "WIN", "MAC" or "UNIX".

• Satellite C660d-A2k - how to increase the backlight of the screen using battery operation

  I bought a new computer laptop, installed all the drivers and it works.
  How to turn on the backlight?

  It works only when I charge the laptop. Turn off when it turns off.
  If add to the brightness of the screen up and turn the screen gets brighter the load.

  How to make led lights fixed, I put it in the market only when the load.

  Hello

  The brightness of the display can be changed using the key combination FN + F6 (increase) and FN + F7 (decrease).
  Have you read the user manual? This is mentioned in the manual that is preinstalled on your laptop.

  In addition, you should also check power Win 7 Options.
  You can find it in the control panel-> power options.

  I guess that switches from laptop to another optimized battery Central while you disconnect the adapter. In this case the brightness of the screen falls down to ensure longest battery working time. You can change the level of brightness for this plant too.

• How to detect the resource (find) information?

  Hi all

  I'm trying to detect programmatically information resource name for devices HSDIO PXI and PXI-4130.   How can I do?    System DAQmx property does not include these devices, and I can't find a way to convert a resource VISA name in name of resource HSDIO or NI DC PS formats.  I enclose a code snippet that detects resource VISA for a device 6552 name, but I can't seem to figure out how to get the name of MAX the device resource.   Both the niHsdio and the properties of 'name of the resource' OR DcPS requires that you spend a session valid in them need valid resource name andI to make...

  And no, asking the operator to launch of MAX and find the name of the resource is not an option

  Thank you

  Hello

  Modular instruments and devices devices use their own set of screws to find devices in the system. The lybrary called NOR-ModInst and i's includedin the palette of the utility with the MID drivers.

  Here is a small example that demonstrates the use of their base.

  Let me know there are questions of the amy

  Kind regards

  JC

• How to detect the number of channels on an oscilloscope?

  I have various models sitting around the laboratory, some two-channel, a few four-channel oscilloscope.  I would like for my program to be able to detect the number of channels is available.

  I can just tell my program how much string is available based on the model number, but is there a VISA command to request scope directly what channels he has?  I would also be able to ask what, if any, ability to function math there.

  "all drivers of the oscilloscope must return the instrumentID after initialization, and that should be enough to know the number of channels.

  What Albert was referring to is that all compatible drivers IVI in their base class interface have an attribute/property that indicates how many channels has the scope.

  If you don't want to use the driver of the IVI for the scope then maybe download some of the drivers and check the source code to see how they calculate this dynamic repeated capablity.

• HP pavilion 15 p100 laptop: hp 15 P100 pavilion how to activate the backlight of the keyboard

  How can I swith on the backlight on my hp pavilion 15 p100 keypad?

  If your laptop has a backlit keyboard, then press the backlight key. Only some models of mobile phones 15 series come with keyboard backlit or touch screens in standard. I did the button backlit in the following image. You may need to press the Fn button to make it work, if the action keys is disabled in the BIOS.

  

• How to detect the cFP-1804

  Hello

  I have a cFP1804 connected to a cFP2120 via EThernet.  The cFP1804 has a thermocouple installed package that is read once per second the 2120 by using the 'FP Read.vi"(see file attachment). When systems are interconnected, the correct values of returns «FP read» When disconnecting from the cFP1804, "PS read" still will continue to serve the received values but triggers error 33800 until the connection has been restored. So far so good.

  The problem I have happens when you reset the cFP2120 while the cFP1804 is offline. At that time a single "FP read.vi' will cause the program running on the cFP2120 to stall completely.

  No idea how to get around this problem?

  I'm using Labview 8.2.1 with RT version 5.0.1

  Thank you

  V

  Hi Volker,

  You can detect the RT and network objectives using the replication VI system. An explanation can be found in NI Developer Zone tutorial: replication of system of target in real time at http://zone.ni.com/devzone/cda/tut/p/id/3937. The download link is at the bottom of the page. Be sure to read the included Readme for installation instructions. If you run the VI find all targets, you will be able to test if the cFP-1804 is on the network.

• How to test the backlight of the Simulator

  Hello Guyz

  Im kind again in the development of blackberry so its more than a new hobby as I recently an interest in java.  So my first app is an attempt to make an application which the camera back given the fon. so I would like to know how to test, without the need to put it on my son, how do I know if d backlight is turned on or off, is the way to display the interface back to the Simulator or something. I'm using eclipse and the blackberry 9800 torch Simulator. How to test the light from my pc?

  Thanks for your time, im hoping a response. Take advantage of the UL

  You can't test the flash of the camera in the BlackBerry smartphone Simulator.  You will need to test this on a real Smartphone BlackBerry.

• How to detect the movement of components in PaneView event?

  Hi, there! ~

  At first please let me explain what is my development environment, I am develping apps based on BlackBerry JRE 6.0.0 by Eclipse and I'm debugging my apps on Simulator (BlackBerry 9800, 6.0.0.706) and peripheral (BlackBerry 9900, 7.1.0.912)

  I'm starting a new application which is a multifunction, during the wake I want to use a new layout UI for me, I've already imported from the code named "PaneManagerDemo" example and I built a framework in my application, I initialized TitleView as HorizontalScrollableTitleView and add titles and content.

  I also used a UI component custom named "ListStyleButtonField" come from the official web site of blackberry, once all the ListStyleButtonField of accumulated height exceeds the height of the content field, which cause the ListStyleButtonField lost her concentration and I do not know the focus was left to the last content topic whose screen slipped to finally make the time.

  My question is is it possible to detect the components slide event, I'll focus on the ListStyleButtonField what is the top of the content if I can control this event, please help me to solve this problem, thank you! ~

  I already find the method to detect the movement of the pane in PaneViewManager event, by according to this thread How to handle events of TouchGesture