How to determine if my PC has a Bluetooth function
Past review windows help.
Original title - how to determine if my PC has a Bluetooth facility? __Si a, is possible to download the software to connect to my laptop? *
Bluetooth is more than simple software - it is a hardware device that communicates with bluetooth devices. Software alone won't do the trick.
Go to start / Control Panel / Device Manager and see if there is no list for a bluetooth device driver. If this isn't the case, you probably have no bluetooth. The best way to check is to contact the manufacturer of the computer and provide them with your serial number and have them check your system to see if bluetooth is installed. Also, if you have there is probably an icon of Bluetooth configuration in the Control Panel-, but it can be a separate program or included in other categories. Otherwise, you need both a bluetooth compatible device with your computer and your version of Vista (and appropriate software, firmware or drivers) - more you need set up and configure - and all that is required by the mobile to establish a bluetooth connection. Here is an article that covers in detail: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-Bluetooth-enabled-device.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
How to determine if an exe has been installed?
Gurus:
I have Windows 7 and Norton-Anti-anti-virus/firewall.
I came across a strange pop-up message when I logged in to my computer today. A pop-up window, said that "do you want to install
\SYSWOW\MAClean.exe (not sure the path or the name of the exe)? While I was doing research on it using another computer, he disappeared. What is one-sided, I don't think any exe with MA*.exe in the computer. My computer also seems to be suspended during indexing - it connects normally - no delay - if I remove the wireless connection. other times, he connects very well, even with the wireless connection is ON. My questions are:-
(1) how to determine if an exe has been installed ("I see not all facilities in uninstall it or change of program" window in the control panel)?
(2) is it possible to list out all messages 'Alerts' or 'Popup' that appears on the screen?
Best regards
San
HI San,
Thanks for posting your question on the Forum of the Microsoft community.
This can happen if the corresponding .exe file is associated with a program that is installed on your computer. To check the instance of the file, you can check in the list of programs and features in Control Panel. Apart from this, it can be due to an infection by the virus.
To know different alerts and notifications, you can open the Action Center in Windows and check important notifications or the needs of Windows to accomplish tasks. To do this, please refer to the following location: Start > Control Panel (see: large icons) > Action Center.
Also, you can also check error messages in the event viewer for more information.
(Click Start, type Event Viewer in the Start Search and press ENTER.)
To check the program third party or service by giving pop-ups/alerts, you can start the computer in a selective startup with no third-party software in operation. This process is known as a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.
In addition, if your computer hangs or crashes often, I suggest you to try the steps from the following link.
8.1 Windows, Windows 8 or Windows 7 hangs or freezes
http://support.Microsoft.com/kb/2681286/en-us
Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this information is useful. Please post for any further assistance.
-
How to determine that the user has purchased an article or not?
Hello
Can someone tell me how can I determine if the user has purchased an article or not?
Until now, I add to the cart and then allow user to pay for this item through Paypal. But now, my goal is to show all these items that the user has already added, but not bought yet.so, whenever user logs in a/c, he can see the item in my cart.
Please... help me
This sounds like a question of PayPal, then you will want to check these forums. If you were using in-app purchases of BB, so yes, it has an API to check the previous in-app purchases.
-
How to determine if a table has reached the end
I use a recursive list of files with a loop for. This in the end is a table, and I want to lnow when the files table has reached the last file if I read them one by one, without deleting them.
Maybe I don't understand, but if you connect to a loop and indexing is enabled, the loop stops when the last element indexed, just wire the number of loops.
-
How to determine if a path has been created with a brush?
How do you do that?
Hi Minimum99
(1) select the path and open the Document Information Panel in the window menu, select the "Brushes" in the menu drop-down Document Information Panel
> The Panel displays the name of the brush used on the chosen path.
(2) select the path and open the Panle to look in the window menu
> The race will take the name of brush that is used on the chosen path.
Hope this helps
~ MBMSumraat
-
Envy touch: how to determine whether or not Windows 10 is an upgrade on an HP laptop?
I need help on how to determine if the 10 Windows on the laptop is an upgrade to say Windows 8 or is not an upgrade.
I had some problems with the audio drivers on an upgrade at the beginning to 10 Windows on another laptop HP and I understand that this issue has been resolved with HP laptops with Windows 10 which are not upgraded.
Thank you
Hello
Can't get HP Envy 17 - So13ca (oh) but HP Envy 17 - S013ca (zero). The following link shows its specifications:
http://support.HP.com/in-en/document/c05187473
She has 10 Home 64-bit Windows pre-installed.
Kind regards.
-
A 8 GB of RAM. I think the upgrade to 16 GB of RAM. (1) what is a compatible RAM and (2) how to determine exact manufacturer details RAM installed? I would like to correspond with just over 8 GB of RAM the same, but what I can determine information system is that it has 8 GB of RAM.
Here's what the service manual says about it:
2 customer accessible/upgradable module slots supports supports up to 8 GB of system RAM PC2-6400, 800 MHz, DDR2 dual channel memory
If you have 2 slots. Max memory is 8 GB of DDR2 - 800 SO - DIMM. The major modules of DDR2 were 4 gigs and a pair of them now at the retail price is about $200 if you have a few precious memory in your laptop and you have the more memory, this laptop can use. When this laptop is out, 8 GB of RAM was a fantastic thing.
Post back with more questions.
If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.
-
How to determine the index of an item in a cluster?
I have a small program that I put in place, as I'm just trying to get up to speed on Labview. I have a boolean cluster buttons and for some reason the top button of the page is coming through as Index 3. There are four buttons in the cluster, but for some reason, there has been a change. The top must be Index 0. How to do the things fixed? I do not see how to determine the index of each button through properties.
Thank you
The order of items in a cluster is the same as the order that you added them. To change the order, just right click and select "rearrange controls in the group. If you use Unbundle by name, you don't care the order.
-
How to determine the amount of ink in the cartridge of 920 ink
I'm operating a HP OfficeJet 6500 has more with HP 920 cartridges. The operating system is Windows XP. How to determine the amount of ink in the cartridges. I get a "low ink" memo of the printer, even if it's too late.
Hello
In the menu, press the right arrow once, then you should see an icon 'meter ink' it will show you an estimated ink level.
-
How to check if a key has been used
Hi all
Is there a way to determine whether a key has been used in a SQL statement?
Example of
I received a call from a developer said that their request was going very slowI checked what oracle was doing
He was using an index with 5 distinct values on a table with a number of lines of 9.2 million
Selectivity is very bad.
Then I discovered after talking to the Director it was a hint to use the (silly) hints
Once we had the suspicion that he did a scan of Table full and actually ran much faster.
However, when I was watching the SQL text in v$ sql and v$ sqlarea he had no way of knowing if we used a hint
IE, I saw: / * + RULE * / in the code.
Does anyone know how to check (from the DB), if an indication is used in a sql statement?
And if the indication is used, what is the indicator.
Thank you
G.
You can use the following to see the execution plan with the outline and see advice
Select * from table (dbms_xplan.display_cursor (null, null, 'schema'));
select /*+ rule */ sum(id) from t1 where flag = 0 Plan hash value: 2170464548 ------------------------------------------------ | Id | Operation | Name | ------------------------------------------------ | 0 | SELECT STATEMENT | | | 1 | SORT AGGREGATE | | | 2 | TABLE ACCESS BY INDEX ROWID| T1 | |* 3 | INDEX RANGE SCAN | T1_FLAG | ------------------------------------------------ Outline Data ------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('10.2.0.1') RBO_OUTLINE OUTLINE_LEAF(@"SEL$1") INDEX(@"SEL$1" "T1"@"SEL$1" ("T1"."FLAG")) END_OUTLINE_DATA */ Predicate Information (identified by operation id): --------------------------------------------------- 3 - access("FLAG"=0) Note ----- - rule based optimizer used (consider using cbo)
HTH
Kind regards
Jagdeep Seven
-
System tablespace allocation how oracle determines the size of the measure
Hello
It may be a silly question, but the I must request and obtain a few knowdge
Assume that the allocation_type tablespace is system so how oracle determines the initial measurement and size max measure?Osama has provided useful links to the information you need. I'll just add with locally managed tablespace that the maximum number of spans is always unlimited even if you specify a value in the storage of declaration of establishment clause. Oracle does not take into account the value you provide and will with unlimited. I consider this unfortunate since in most cases, I know how large tables can reach and if the table extends beyond that point a developer made a mistake.
HTH - Mark D Powell.
-
How to determine if it is free!
I've been solving the problems with Dell Openmanage SNMP and they asked if the version of 3.5i that I installed the free one or the company. I don't know how to determine that. Can someone let me know?
Sign in using the VI Client and click on your host, right, there should be tabs that say abstract, Virtual Machines and there should be on this Configurationsays, click that and basically he is has the license, if it's free you would have registered online with VMware and received a key and it should look like this :
If you see more features than that OR he says EVAL, then no, you do not use the liensed free "version of ESXi
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
How Oracle determines an as key preserved table or not?
I tried to join employees and departments in the HR schema. Normally, the departments is not preserved key in the join operation. But I fixed in the view so that each service has exactly one employee, dept_no to become the key for the join. But still, he said, "cannot change the table not preserved key." Any tips? the type of join (left or right or inside or outside) does affect the mechanism on how Oracle determine which are preserved to key and which are not? Thank you.Hello
I would say yes, maybe can depend on join to condition paritially between tables 99% of the time. Because if you see the documentation it says
"It is not necessary the keys of a table to be selected to be key preserved. It is sufficient if the keys have been selected, then they would also be key (s) of the result of the join. "
'A table is kept if all keys in the table can also be a key to the result of the join key' - to turn the key role of role by providing the unique character.
-Pavan Kumar N
-
How to determine if DBMS_STATS or ANALYZE TABLE used
Dear all,
Please please describe how to determine if DBMS_STATS or ANALYZE TABLE has been used on an Oracle 10 g 2 server.
Thank you!Try looking at GLOBAL_STATS in user/all/dba_tables.
When I ANALYSIS it shows up under the No.
When I dbms_stats.gather_table_stats, it appears that YES.
You could probably invoke dbms_stats.gather_table_stats with good arguments to get a number in the overall stats, but this technique can be good enough for you. -
How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?
Hello
Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.
Maybe you are looking for
-
My touchpad is holing of batteries every week. I use my computer in less than 12 hours per week. This seems odd. Y at - it a sleep track pad option that I don't know?
-
Looking for keyboard shortcut to focus on the tab to the left or to the right of current
Often, I want to be able to move my goal to left following the power or right of the current tab. I had rather not use my mouse. I searched a little jump lists, but can't find what does either makes precisely this. It's a bit like the Ctrl + Tab or C
-
iPhone 6 s Plus 9.3.2 problem Bluetooth
Hello Apple personal support, I just upgraded my iPhone 6 more than 64 GB of iOS version 9.3.1 the newly released 9.3.2 thanks to the embedded wireless iPhone general Software updated successfully. Today, I began my journey to work as usual by car (A
-
Xperia Z5 without notes and problem of rotating House.
Xperia Z5 have no application notes and also rotation of the home screen does not work even after changing the setting to the screen
-
I have no sound on the computer after you have reinstalled Windows.
Hello I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :( So the most common answer seems to be getting the correct driver. I have a motherboard ASUS P7-P55-M, I went to