How to determine the instance for a given entity vSphere vCenter

Similar Questions

• How to determine the threshold for an LED voltage

  A density of current over voltage that is generated by one of my Labview OLED measurement systems is attached.  I'm trying to programmatically determine the threshold voltage.  When the data is displayed in the logarithmic scale it is possible to observe a charge injection clear (0.8, 0.000203).  The problem is that I can visually observe this value, but I'm not able to solve by program for her.  I tried to take the derivative to observe the changes of slope, but only to determine the operating voltage.  Any ideas how I could solve this value?

  Thank you

  E

  You are on the right track, you just have to do deeper. Try to take the 2nd derivative and find the points where it is larger. This will show you where the log graph is concave upward and where is your ve. I've included a plot of Log (data), D (Log (data) and D (Log (Data), 2).) I also have zoomed in on the area of interest, then pay attention to the balance.

  You may need to make some good assumptions. For example, with exactly what I posted above, you get Vth = - 0.4 or so. If you assume Ve > 0, then you get Vth = 0.8.

  In addition, you probably want to do other fancy stuff such as: interpolate the data to get more points, smooth interpolation, trim the ends of the derived data (they want 0 according to your derived method).

  

  

• How to determine the number of highlight ' to write ' for DAQmx generate analog output?

  On the configuration of the stage for DAQmx generate analog output, there is a field "value to write.  I can't find any explanation for what it is, how it determines the value to enter, nor what he writes.  I am trying to go through the tutorials and it cling.

  Someone would give an explanation?

  Hello

  To write value specifies the value to write in the channels, lines or ports selected in string parameters. In other words, this value will be the value of your DC output (for example if you enter 5, your output will be 5V). To get information on different fields in SignalExpress, access help"context-sensitive help. A pane will appear in your work environment that displays the coordinates of the field when you place your pointer over them.

  For new users of SignalExpress:

  Generation of DC signals with NI DAQmx devices: step in the DAQmx build, select 1 sample (on request) in the generation Mode dropdown. You can select a programmatic input to generate, or you can remove the check mark from the check box use programmatic input and specify a value for generating in the field of value to write . NOR-DAQmx help also provides additional information about the data generation.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  After two execution plans that have the same sql_id, so we can see what you're talking about.

  See "Oracle Explain Explain Plan optimizer" by Maria Colgan of the Oracle optimizer group

  http://www.Oracle.com/technetwork/database/bi-Datawarehousing/TWP-explain-the-explain-plan-052011-393674.PDF

  Examine the various aspects of a selectivity to parallel execution plan

  performance and understand what information you should be brilliant

  the plan can be overwhelming even for the most experienced DBA. This document

  offers a detailed explanation on each of the aspects of the execution plan and a

  Overview of what caused the CBO to make the decision, he did.

• How to determine the amount of memory shipped on the PXI-5114

  How to determine the amount of memory onboard, I have on my PXI-5114?

  Thanks in advance.

  Hello

  I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

  

  This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

  Kind regards

  Kyle S

• How to determine the amount of memory was my pci-6115?

  How to determine the amount of memory was my pci-6115?

  I see two beaches of memory OR max.

  My PCI-6115 there 32 or 64 MB memory?

  Range of memory between 1: FE9F7000-FE9F7FFF

  Range of memory between 2: FE9F7800-FE9F8FFF

  It's an old part number for the Board 32 MB.

  -Christina

• How to determine the index of an item in a cluster?

  I have a small program that I put in place, as I'm just trying to get up to speed on Labview.  I have a boolean cluster buttons and for some reason the top button of the page is coming through as Index 3.  There are four buttons in the cluster, but for some reason, there has been a change.  The top must be Index 0.  How to do the things fixed?  I do not see how to determine the index of each button through properties.

  Thank you

  The order of items in a cluster is the same as the order that you added them. To change the order, just right click and select "rearrange controls in the group. If you use Unbundle by name, you don't care the order.

• How to determine the location of a Windows 7?

  I want to know how Windows 7 to locate a comphuter.

  Thank you

  There are two ways that windows can determine the location of the computer.  The most common is through the ip address.  The Ip address is assigned to the netwrok by the ISP.  You can determine the location of his similiarly IP network how to determine the place of a phone number of his area code.

  Also what you do online can casue of many sites infer you the location.  For example, if you use goolge to search a lot of things in Minneapolis, they deduce that you live in this area will serve as announcements concerning this area.

• How to determine the ROWNUM in a Master detail form

  Hello
  
  I work in a master detail form with controls and information in order of points; I have created a process that allows users to select a product on a tabular presentation ID and the next column is filled automatically with the Product Description.
  
  To achieve this, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
  
  < ul > I use a form tabular-created by Wizard, instead of manual tabular form; and < /ul >
  < ul > instead of using another page as a Popup to pass the parameter of the ROWNUM, I use a plugin called "tabular form Super LOV" which is a modified version of Super LOV the SkillBuilders who works on tabular forms. < /ul >
  
  The product ID is returned in the line by the plug-in; but in the case of the Description of the product, it is always returned in the first row; and my problem is that I don't know how to determine the line where the user clicked to call the plugin.
  
  I created an example in apex.oracle.com in case someone wants to look at:
  Workspace: ediazjorge
  User name: test
  Password: test
  App name: Sample App
  The app number: 1550
  
  BTW, I use Apex 4.1.1.00.23 and Oracle DB 10.3.2.
  
  Thanks in advance,
  
  Erick

  See what {message identifier: = 10436048}

  OR

  {message: id = 10458307}

  You must use something like below

  //in your case currIndex means the ROWNUM value you have
  $('input[name="f03"]')[currIndex].val('some thing')
  

  And for the jquery selector try this

  $('img[alt="Popup Lov"]')
  

• Installation on RHEL 5.4 11.2.0.1.0 (64-bit) &gt; how to determine the shmmax

  Hi, everyone-
  
  I try to install on RHEL 5.4 11.2.0.1.0 (64-bit). I have a total of 46G of memory.
  
  It is said that in the Oracle documentation:
  "The minimum required value for shmmax is 0.5 GB. However, Oracle recommends to set the value of shmmax 2.0 GB for optimal performance of the system. ».
  
  In the other docs it says it should be 50% of the total memory.
  
  Please advise!

  If you have access to the Support of Oracle, see notes

  Semaphores and shared memory - an overview [ID 153961.1]
  How to determine the size of the SGA (7.x, 8.x, 9.x, 10g) [ID 1008866.6]

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• How to disable the option for children to receive messages from my iPhone on their iPhones?

  How to disable the option for my children to receive my iPhone imesages on their iPhones?

  Do not share account iCloud with them. iCloud accounts are not meant to be shared.

• How to get the manual for Satellite Pro 4200?

  How to get the manual for Pro 4200. I have download olm_up and setup.exe (72 kt) of http://eu.computers-toshiba-europe.com?.

  Hello

  Please visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp

  I m you will find a good manual of your device.

  Good bye

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported