How to determine the Version of the Oracle Identity Manager server?

Similar Questions

• To start the Oracle Identity Manager how much RAM is required?

  To start an Oracle Identity Manager and access, how much RAM is required? and with what amount of RAM required.
  
  Tell me any how to set JVM has increased.
  
  Using Oracle VM for Identity manager and the use of the RAM of 1300 provided to the virtual machine. Physical PC with 4 GB of RAM.
  
  My setup will be help to crushed the Oracle Identity Manager without fault?

  You must be at least 3.5 GB of RAM for IOM. Including SOA, it's going to be 6 to 8 GB. See the links in the configuration system supported here:
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html

  Kind regards
  GP

• How to determine the Oracle Max process on Windows Server settings

  Currently I have Oracle 11.2.0.1.0 running
  Windows 2003 EE R2 SP2 x 32
  
  The issue now is:
  
  How to determine what is the maximum value that I can set the process?
  
  I guess that's the operating system and hardware dependent, but I can't find documentation on this topic.
  
  Any help is appreciated.
  Jason Longenecker
  
  Published by: LONGENECKER on May 13, 2013 11:33
  
  Published by: LONGENECKER on May 13, 2013 11:36

  We shouldn't just work the PROCESS parameter for the maximum number of BONES.

  More processes that you have, more will consume PGA the oracle Instance, i.e. more memory will be used on your server.

  You should check v$ resource_limit see if it really reached setting TREATY limits, if yes increase the parameter appropriately so that the high tide of use remains about 80% of the value of the parameter. Check if the number of sessions dedicated process is really necessary, otherwise you can consider the use of database resident connection pooling or a shared server or tuning configuration opening less sessions on the database.

  Depending on how much you increase, take a look at the view of PGA advice after a workload of the cycle of V$ PGA_TARGET_ADVICE and V$ MEMORY_TARGET_ADVICE.

• SOA-INFRA is State FAILURE while improving the Oracle Identity Manager to 11.1.1.5

  This issue occurred when we tried to improve our IOM to version 11.1.1.5.

  All suites installation went well (Oracle IDAM 11.1.1.5) and SOA Suite 11.1.1.5. The field is also created, and schemas are also upgraded. But when we create a domain, the domain created, the SOA_INFRA application comes in the onset of failure, even if the soa server returns execution state.

  Please find the logs below (found when you start the server):

  < 31 July 2013 12:19:36 CEST > < error > < org.springframework.web.context.ContextLoader > < BEA-000000 > < failed to initialize context

  org.springframework.beans.factory.BeanCreationException: error creating bean with name "SensorManager" defined in ServletContext resource [/WEB-INF/fabric-config-core.xml]: cannot resolve a reference to 'FabricMesh' of the bean while setting the property "fabricMesh" bean nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMesh': FactoryBean threw the exception on the creation of the object; nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMeshTarget' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: cannot resolve a reference to 'SpringServiceEngine' bean when bean property setting "serviceEngines" with the button [6]; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: class loading error [oracle.integration.platform.blocks.java.SpringServiceEngine] to the beans with the name 'SpringServiceEngine' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: problem with the file class or dependent class; nested exception is java.lang.NoClassDefFoundError: weblogic/sca/api/ScaReferenceProcessor

  at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)

  at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)

  to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)

  at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)

  at org.springframework.context.support.AbstractApplicationContext.registerListeners (AbstractApplicationContext.jav

  The following link is as a result of the upgrade.

  http://docs.Oracle.com/CD/E23943_01/upgrade.1111/e10129/upgrade_oim.htm

  Any help will be much appreciated.

  Hello

  I found the solution to my problem in the following link:

  http://blog.Darwin-it.nl/2012/05/IM-helping-my-new-customer-in-migrating.html

  Kind regards

  Carole

• From the Cluster of Oracle Identity Manager 9.1.0.2 Application (UX)

  Hello friends,
  I have a question on how to start the Oracle Identity Manager 9.1.0.2 application that is deployed on Oracle WebLogic Server (OWS) 11g on 2 nodes (OIM_SERVER_01 and OIM_SERVER_02).
  What is the procedure to start the administration server, then the nodes where the application is deployed Oracle Identity Manager 9.1.0.2
  I left wondering orders:
  1 xlStartServer.sh
  2 xlStartWLS.sh
  3 xlStartManagedServer.sh
  4 startNodeManager.sh
  
  Thanks for the support...

  Hello

  If the node Manager is configured,

  1. start administration server
  2. Start Node manager
  3. run the two managed server admin server UI.

  Kind regards
  Raghav.

• Install the design of the Oraclar Identity Manager 9.1.0.2 on Linux console

  Hello friends,
  You can install the design of the Oracle Identity Manager 9.1.0.2 on Linux console
  
  Thank you

  Hello
  You can check the article: [ID 466390.1] in Metalink.

  Good luck.

• Oracle Identity Manager notification e-mail

  Friends
  Can someone help me how configure the Oracle Identity Manager, email notifications, for example when a user is configured in the Oracle Identity Manager, and then launch an email to notify the user that their account has been put in service.
  Where should I enter for this procedure mail server settings.
  Thank you

  Hi JKL.

  Here are some metalink useful in helping to understand the mechanism of notification of IOM.

  Configuring Email Notification for users Oracle Identity Manager created through reconciliation Doc ID: 560808.1
  https://MetaLink.Oracle.com/MetaLink/PLSQL/showdoc?DB=not&ID=560808.1&BlackFrame=1

  An example of e-mail notifications and configure it with a resource object Provisioning Doc ID: 457836.1
  https://MetaLink.Oracle.com/MetaLink/PLSQL/showdoc?DB=not&ID=457836.1&BlackFrame=1

  How to send an email Notification when the user was created through the Administrative Console Doc ID: 780394.1
  https://MetaLink.Oracle.com/CSP/main/article?cmd=show&type=not&ID=780394.1

  Renato.

• Error during installation of Oracle Identity Manager

  Hello
  I'm having a problem when trying to install Oracle Identity Manager. I'm trying it now for two days and it's always the same problem.
  
  I have read this thread:
  Oracle Identity Manager Server installation problem (but still have no idea what to do).
  
  I'm installing in a virtual lab environment (Windows Server 2008 on VMware).
  This is a new installation.
  
  Installation scenario:_
  * 1.* Oracle Database 10g (10.2.0.3)
  * 2 Suite DBA of Toad for Oracle
  * 3.* Oracle Weblogic Server 11g R1
  * 4 Oracle Identity Manager v9.1.0.1
  
  * 5.*
  Then I create a new instance of database Oracle for Oracle Identity Manager as described here:
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 6.*
  Then I prepare the DB for Oracle Identity Manager by running:
  prepare_xl_db.bat C:\Oracle\product\10.2.0\db_1 xelsysadm xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123 password123 XAVIER
  
  as described here (preparation of the database under Windows):
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 7.*
  I get no error after you run the script is finished
  
  * 8.*
  Then I run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
  
  * 9.*
  I'll take the steps and after the installation of the error pop ups next:
  
  Following error occurred during the creation of connected scheme*.
  Error occurred while loading database script*.
  +...\Oracle identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
  Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM. PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: statement ignored [07/10/09 12:18]*.
  
  * 10.*
  Then I click Next and this message pop ups:
  
  Install oracle Identity Manager found that SetDBKey.bat failed. *
  
  * 11
  Then the installation ends / dropouts
  
  
  Does anyone have an idea what is talking about this error and how to get around?
  I would be really appreciated. I'm getting desperate, because I don't know what I'm doing wrong. I thank very you much in advance!

  Make sure that the IOM database schema is created.

  This error is usually tied when the user 'SYSTEM' is used as a schema of the IOM. IOM does not account for database support as its schema SYSTEM.

  After executing the prepare_db.sh, connect to the database using schema IOM to itself, if you have connectivity.

• Block users in Oracle Identity Manager 9.1.0.2

  Hello
  I have a status (locked user) query of the user in Oracle Identity Manager 9.1.0.2.
  The possibility for users to block, seen in the Oracle Identity Manager web administration console appears in the disabled state. As I can enable this feature in Oracle Identity Manager 9. ?
  
  Thanks for the support

  Have not exactly your question.

  Whenever someone tries to login with password wrong, then he gets locked in the IOM. You will need to go to the administration Console and unlock it. You can also do this in DB as well.

  To lock the user to the administration console, you must create a custom button and extend the class action to block this user in IOM.

  Workaround

  Create a UDF called LOCK.
  Create a trigger on this UDF, i.e. whenever changes of true LOCK, then lock the user using query DB or API (UPDATEUSER - user Users.Lock)

• Oracle Identity Manager Upgrade 9.1.0.2 BP15

  Hi friends,
  I have a question about the upgrade of Oracle Identity Manager 9.1.0.1:
  1. What is the file that allows me to perform the migration of Oracle Identity Manager 9.1.0.2.
  2. What is the patch that allows me to level to BP15 9.1.0.2
  
  Grateful for their support.

  A.1st you need to upgrade to 9102
  1. set at the database level
  2. turn to level the Oracle Identity Manager
  3. put the Oracle Identity Manager Console level

  See the below document for upgrading 9101 to 9102
  http://download.Oracle.com/docs/CD/E14899_01/doc.9102e14764.pdf

  B.Upgrage 9102 to 9102BP15
  1. set at the database level
  2. turn to level the Oracle Identity Manager
  3. put the Oracle Identity Manager Console level

  Famous article of Installer readme document

• How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  After two execution plans that have the same sql_id, so we can see what you're talking about.

  See "Oracle Explain Explain Plan optimizer" by Maria Colgan of the Oracle optimizer group

  http://www.Oracle.com/technetwork/database/bi-Datawarehousing/TWP-explain-the-explain-plan-052011-393674.PDF

  Examine the various aspects of a selectivity to parallel execution plan

  performance and understand what information you should be brilliant

  the plan can be overwhelming even for the most experienced DBA. This document

  offers a detailed explanation on each of the aspects of the execution plan and a

  Overview of what caused the CBO to make the decision, he did.

• How to determine the ROWNUM in a Master detail form

  Hello
  
  I work in a master detail form with controls and information in order of points; I have created a process that allows users to select a product on a tabular presentation ID and the next column is filled automatically with the Product Description.
  
  To achieve this, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
  
  < ul > I use a form tabular-created by Wizard, instead of manual tabular form; and < /ul >
  < ul > instead of using another page as a Popup to pass the parameter of the ROWNUM, I use a plugin called "tabular form Super LOV" which is a modified version of Super LOV the SkillBuilders who works on tabular forms. < /ul >
  
  The product ID is returned in the line by the plug-in; but in the case of the Description of the product, it is always returned in the first row; and my problem is that I don't know how to determine the line where the user clicked to call the plugin.
  
  I created an example in apex.oracle.com in case someone wants to look at:
  Workspace: ediazjorge
  User name: test
  Password: test
  App name: Sample App
  The app number: 1550
  
  BTW, I use Apex 4.1.1.00.23 and Oracle DB 10.3.2.
  
  Thanks in advance,
  
  Erick

  See what {message identifier: = 10436048}

  OR

  {message: id = 10458307}

  You must use something like below

  //in your case currIndex means the ROWNUM value you have
  $('input[name="f03"]')[currIndex].val('some thing')
  

  And for the jquery selector try this

  $('img[alt="Popup Lov"]')
  

• How to determine the amount of memory shipped on the PXI-5114

  How to determine the amount of memory onboard, I have on my PXI-5114?

  Thanks in advance.

  Hello

  I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

  

  This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

  Kind regards

  Kyle S

• Installation on RHEL 5.4 11.2.0.1.0 (64-bit) &gt; how to determine the shmmax

  Hi, everyone-
  
  I try to install on RHEL 5.4 11.2.0.1.0 (64-bit). I have a total of 46G of memory.
  
  It is said that in the Oracle documentation:
  "The minimum required value for shmmax is 0.5 GB. However, Oracle recommends to set the value of shmmax 2.0 GB for optimal performance of the system. ».
  
  In the other docs it says it should be 50% of the total memory.
  
  Please advise!

  If you have access to the Support of Oracle, see notes

  Semaphores and shared memory - an overview [ID 153961.1]
  How to determine the size of the SGA (7.x, 8.x, 9.x, 10g) [ID 1008866.6]

• How to exclude the Oracle Workflow installation CD companion server?

  We are modernizing our E-Business suite 11i database to 10.2.0.3.
  
  The E-Business suite upgrade request notice to install "Oracle Database 10 g products" Companion CD on 10g of the House. Oracle default workflow server is included in the guide installation with a CD Type 'Install a database Oracle 10 g products'. However the installation document CD companion says that don't install Server workflow on the database of trade electronics uite, as indicated below.
  
  Now how can I exclude the Oracle workflow installation CD companion server?
  
  ================================
  Note: Do not install Oracle Workflow Server in Oracle E-Business
  Office database. If you want to use the version of Oracle Workflow
  available with Oracle Database 10g, or any Oracle database
  components that depend on the version of Oracle Workflow, then you
  need to install the Oracle of Workflow Server in a database that is not used
  Properties of an instance of Oracle E-Business Suite.
  For an Oracle E-Business Suite database, you can continue to use the
  version of the Oracle Workflow Server integrated in Oracle E-Business
  Suite.
  ================================

  John,

  You should ignore the steps under "Preparing Oracle Workflow Server for the Oracle Workflow Middle Tier Installation", but the workflow will be installed as part of the accompanying CD (select option 2 - products of Oracle database)

  Upgrade of Oracle Applications 11i database 10g R2 (10.2.0.3)
  http://Oracle-Apps-DBA.blogspot.com/2007/09/upgrade-Oracle-Applications-11i.html

  Here is the link for the steps you need to jump:

  Prepare mid-level Workflow Oracle Oracle Workflow Server Installation
  http://download.Oracle.com/docs/CD/B19306_01/install.102/B15664/install_sw.htm#BABHHHCC