How to determine which version of LR is running?

Similar Questions

• Determine which version of ESX4i is running

  I recently downloaded ESXi from the VMware Web site, however, after I built it out as a virtual machine in VMware Workstation I noticed that there is an iso available on the VMware Web site for each version of ESX for the essential to companies more.  I downloaded ESX from a Web page of VMware, who had all these options and I did not know that different ISOs exist.   When what happened?  It was there was only 1 download ESX and it has been licensing allowing features to activate.  So when my colleague asked me what version of ESX4i I ran, if it has been advanced or Enterprise plus, I can't even answer him intelligently.  The homepage of ESX4i shows that I have ESX 4.0.0 installed with build # 208167, but when I looked at the details of each of the ISOs of VMware for all versions licensed they say all the same build #, WTF?  Can someone help me sort out what it is.  Thank you!

  g

  Hello.

  These ISOs are all the same.  Look at the MD5 values for each version of ESXi listed.  They are all the same.  The best way to do this is to log the Licensing Portal and see which version you have purchased the figure. You can also watch your features under license and understand it, but it will be a lot more work.

  Good luck!

• How to find which version of Windows Live Mail I have?

  The death of my last computer, my beloved Outlook Express died with him.  I was shocked to know that I had to have Windows Live Mail and he did not support by e-mail.  I'm still scratching my head trying to understand why they would take it away from us when WLM is supposed to be better than OE but can't get a response from Microsoft on this one here.  Best buy got Thunderbird a stationery, but I couldn't use it with Windows 7.  So for two years, I didn't have a paper mill.  I recently discovered that I have Thunderbird on Windows 7, I installed it and have all the stationery that I could wish.  However, for ease of use and the folder options I prefer WLM.  Now, someone just told me that WLM 9 supports HTML for stationery.  By that, I mean like in Thunderbird, I can pull up a 'file', (an image or picture) to My Documents or my pictures in a new e-mail message and use it as stationery and can I download WLM 9 and remove WLM 11.

  
  

  Firstly, I bought my computer in 2012 so I guess I have WLM 11, but I can't find out how to know which version I.  Does anyone know how to find out who?

  In addition, WLM 11 doesn't have a lot of stuff that's not WLM 9?  I would make a big mistake by changing from 11 to 9?  How can ensure me that all my information is changed in the course of 9?

  Any advice would be appreciated.  I really, really enjoy my stationery in Thunderbird, but it save me a step if I could do it in WLM instead to run two programs of stationery.

  Thank you.

  On Sunday, April 27, 2014 18:59:39 + 0000, CarolHiggins6710 wrote:

  * In my last computer is dead, my Outlook Express beloved died with him.
  I was shocked to know that I had to have Windows Live Mail

  Certainly, you do not have Windows Live Mail. It is quite
  as an option.

  and he has not supported by email.

  He certainly fact e-mail support.

  You have the choice of many e-mail programs, some by Microsoft and some
  by others, some free and others for sale. As far as I am
  concerned, Windows Live Mail is not a very good choice and there is
  many of the better ones. I recommend that you try several and choose the
  the one that you prefer.

• How to determine my version of Internet Explorer. Desktop running Windows 7

  How to determine my version of Internet Explorer. Desktop running Windows 7

  Open IE... Look for the 'speed' at the top right, and click on it.

  Select "in regard to Internet Explorer"...

• How to determine the Version of the Oracle Identity Manager server?

  Friends,
  I have two questions about Identity Manager...?
  
  How to determine the Version of the OIM 11 g Server?
  How to determine the Version of the Server 9 IOM?
  
  
  
  Thank you

  The bundle of plates are observable by build number. If you go to metalink and check the patch bundle, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. What is written in XSD table during patching. Once installed, there is no identifier that says "applied BPXXX.

  -Kevin

• How to determine the version of HP CIM?

  I wonder if anyone knows the command to determine what version of HP CIM runs on our ESXi servers?

  I don't have access to a multitude of HP at the present time, but you should be able to determine if and what version of suppliers CIM HP is installed by running

  esxcli list of vib software | less

  instead of "|" less"you can also try"| grep-i HP'or'| grep-i Hewlett'to the output of the filter.

  André

• How to determine which service pack of Windows I have?

  I'm just curious as to how where to find service pack windows vista I use. In my hp laptop when I look in
  system in the Control Panel, he said the pack he uses. I did it in the dell desktop, but it doesn't have the information
  in the information window.

  Hello MonteQO,

  Please see the information from Microsoft on how to determine the operating system that you have installed.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  If the system page does not list a Service pack version number, you don't have a service pack installed on this computer.

  I hope this helps answer your question.

• How to know which version of DirectX is installed in Windows 7

  HOW CAN I FINDOUT WHICH IS the TYPE OF VERSION of DirectX

  INSTALLED ON MY PC

  Took me some time to find the answer on the microsoft site, but here it is.

  To use the DirectX Diagnostic tool to determine the version of DirectX installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Type dxdiag, and then click OK.
  3. On the System tab, note the version of DirectX displayed on the DirectX Version line.
  4. On the DirectX files tab, check the version information for each DirectX file.
  5. When you are finished checking file versions, click exit.

  If Windows cannot find the dxdiag, version 5.0 program or an earlier version of DirectX is installed on your computer. If this is the case, download and install the latest version of DirectX.

• How to determine which program to use to open files and programs?

  Help!

  How can I determine which program opens a file or another program?

  I constantly get the message that xxxxx will not open this file. / Select a program to open this file/etc.

  Hi marco47,

  You want to get this prompt either if there is no program installed on the computer that opens the file type or you have not associated any program to open this type of file.

  See the link below to find out how to associate any type of file or Protocol with a program to open the file.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See the Microsoft article below and run the fixit tool to reset the associations of files on the computer.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to determine which files can be repaired by the System File Checker tool

  Original title: results of scan now

  I have scan now it says I have corrupted files, how to know what they are

  Hi Honey bunch,

  To determine which files can be repaired by the System File Checker tool, analyze the file journal program SFC.exe (System File Checker) generates. Follow the steps mentioned in the article below

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to determine which hard drive makes the rattling?

  Sometimes I hear the hard drive makes clicking, get 4 hard drives and would like to know how to determine who makes clicking sounds.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Sunday, September 16, 2012 12:58:32 + 0000, oem7110 wrote:

  Sometimes I hear the hard drive makes the rattling

  Almost certainly an indication that a disc is a failure and should be
  replaced as soon as POSSIBLE.

  I get 4 hard drives and would like to know how to determine who makes clicking sounds.

  Does anyone have any suggestions?

  1. open the case and disconnect the power cables of all readers but
  C:, then run the computer for awhile. If we click, it is C: this is
  dying.

  2. then plug the power cable into a different drive and run it
  computer for a while. If you click on, it's that you reconnected
  who is dying.

  3, number 2 twice more if necessary to repeat.

  Ken Blake, Microsoft MVP

• How to find which version of Win 7 Home Premium?

  I am helping a friend with a new computer running Windows 7 Home Premium SP2 and want to know which version of the operating system.  Info panel Ctrl Systen does not show the version.

  Click Start, type: winver

  Click on winver

  The dialog box will describe in detail the version installed.

• any ideas how to know which version of windows 8 is running on my laptop

  I have a hp Pavilion running windows 8, but the version that I use cannot update 8.1 download store. is there a way to know which version I have?

  Hello

  Type 'Information system' in the search...

  The update appears in the store?

  Do you have any kind of error messages?

• How Firefox decides which device to use (when run by mutt mailto links)?

  In Edit > Preferences, Applications, content type "mailto", I chose "Use mutt." When I click on mailto: links, mutt opens in a gnome-terminal. I want the terminal either through the alternatives system using x-terminal-emulator. How Firefox chooses which device to use here?

  You can set via favorite Applications (GNOME > system > personal > preferred Applications > system)

• How do you use the config.xml file to determine which version of an application, a user will download?

  I have two APKs for the same application and I implemented the config.XML of lower version number working for all screen sizes.  The config.XML for the higher version number is set up for only the scresns large and extra-large.  Here's the code from the config.xml file.

  Version 1

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "true".
  	Android: normalScreens = 'true '.
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  Version 2

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "false".
  	Android: normalScreens = "false".
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  When I try to download the app on Google game, only the top version is available, regardless of the size of the unit.  When I asked Google game why this was not behave as expected, they said that the file manifest for both applications is the same.  Here is the code, they shot in the manifest after having used PhoneGap Build.

  < media screens android: anyDensity = "true" android: smallScreens = "true" android: normalScreens = "true" android: largeScreens = "true" android: Center = "true" android: xlargeScreens = "true" / >

  Can someone explain why PhoneGap Build is not using the settings I set in the config.xml file?  And how to fix this?

  The tag is not a valid tag in the config.xml file. This is probably why you see the same tag in two, as the build service is ignorant.

  As to how solve you this problem. Currently, you can not, but the next version of android-cordova will include the ability to add a tag which you will be able to use like this: