How to disable a previous installation when I don't have the computer?

Similar Questions

• How can I reinstall windows vista when I don't have the CD?

  I have a problem with my windows vista and I need a new facility, the problem is that I don't have the CD because it was installed when I bought the laptop.
  My windows is Vista Business, SP2, 32-bit, 2007!

  Thank you!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I reinstall windows vista, when I don't have the disc to ony my license on the side of the computer key

  I need to make an own reformatting and installing windows Vista on my Dell Inspiron C521 pc.  Restore dell to original factory option does not work.  Windows has no option to create a recovery disc - am unble to locate the recdisc.exe and possess no original discs as windows came pre-installed, when I brought the machine license key only 25 digits

  You call Dell Support and request a set of recovery disks. The cost is minmal and worth it.

  http://support.Dell.com/

  Also, ask to speak to a technician. See if the technology can teach you how to access the recovery Partition.

  Del has installed the partition, they know how to use it.

• How to disable a previous installation of Lightroom 6 on a computer that no longer works?

  I have an iMac with Lightroom installed 6. My old computer, also an iMac, had 6 installed Lightroom. The old computer has hard disk problems and won't open Lightroom 6 so I can't disable this facility. Now, I get a message that I need to disable the previous Lightroom 6 installations when I open the program on my new computer. How to disable a previous installation of Lightroom 6 so I have the computer on which it is installed is not functional? I'm only using Lightroom 6 on a computer, my new iMac. Please notify.

  Here is the registration information for my 6 Lightroom from Adobe's Web site:

  Name of the product Serial number Version Platform Registration date Adobe Photoshop Lightroom Never send a serial number on a public forum, mod 6.0 Several May 29, 2015

  [serial nr removed by mod]

  Contact Adobe Live Chat

• How I picked my email address when I don't have an alternative email to reset it and the mobile operator that I use is not there at all. Thank you

  How I picked my email address when I don't have an alternative email address to reset and also the mobile operator I'm using is not listed it at all.

  Hotmail gives me a few options, but non of them is useful to me...

  The problem is probably my junk e-mail generated from my e-mail address or something else, I don't know about you!

  Thank you

  Hi Beqiri2012,

  Just to clarify, please repost your question on the Hotmail Forums below to help with your Hotmail account number:

  http://windowslivehelp.com/forums.aspx?ForumID=d3fda415-1e53-4007-8e0c-2a77180ffb1d

  Thank you!

• How can I install my Epson Stylus Cx7400 printer copier when I don't have the cd 4 it?

  I have the Epson Stylus Cx7400 printer copier scanner and I don't have the cd 4 it I do not had a 2 when I moved and I got another computer, I was wondering if I can install some knowledge how to get the cd out?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=89902&prodoid=63069503&infoType=downloads&platform=Windows

  Above is the link to Epson for your printer model.

  Choose your operating system it > download/save the drivers on your desktop > follow the Epson printer Installation Instructions.

  See you soon. Mick Murphy - Microsoft partner

• How to re - install Windows 7, when I don't have an installation disc

  I have a netbook running Windows 7, Sony that gives warnings of imminent drive failure S.M.A.R.T.. My question is, if I replace the hard drive, how to re - install the OS that I only have a repair on the old disk partition? The drive is still readable, is there a way to copy it to the new drive (maybe by copying them to an external USB drive). I have the key to license available for re - activate.

  Thank you in advance.

  Yes, if the HD is still functional, capable of error free reads and writes, you can attach a new HD in a USB enclosure and clone the drive. Download the appropriate software on the web site of the manufacturer of the car inside. Otherwise, the software is available from 3 parties. E.g. Acronis True Image (not free).

  You describe the Sony as a netbook, so I guess it doesn't have a CD or DVD drive. To use suggestions from Andre Da Costa, you may have to use a plug-in DVD USB drive.  If you do, you can place the original HD in a USB enclosure to copy files from the user to the new drive. You will have to reinstall applications from whatever media you have.

  Tom Ferguson

• How to bind a previous installation on another HARD drive to the creative program cloud on new OS

  Hello
  So I installed a few clouds creative programs like after effects on my computer in a folder I made called E:\CreativeApps.

  I have reset my OS on my C:\ drive so there a new version of windows. (In other words: C:\ had CC Manager & E:\ had after effects install files, etc)

  I installed the program Creative cloud again (on the new OS) and I can't open after fine effest from the installation E:\CreativeApps directory.

  But CC program displays not "installed or day or trial" sayts It they aren't installed.

  I tried to move the path in the preferences on my old bones, but it does not analyze the directory to see if the programs are there.

  I have the feeling that maybe something with the registry or something similar because the prgram didn't really say its installed or what version it is.

  Is it possible to connect it back, so I don't know if there will be an update to it or what I have to spend another 2-10 GB to re-download the programs on top of eachother just to see if there is an update.

  Thank you

  You can not 'repeat' that kind of thing.  It is stored in various files *.db Adobe (OPM.db, caps.db) and only a correct installation put the correct information there. In any case, it's a moot point. As long as the apps work you do not miss anything. Major updates will be probably important enough to notice...

  Mylenium

• How to disable a photoshop license if I don't have access to my old computer

  I have a license of photoshop CS5, but when I install it it shows that this serial number is already activated

  I don't have access to my old computer more, how to disable and re-enable on my current computer.

  Contact Support by chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• How to access a laptop that is linked to a Microsoft Account when I don't have the password?

  My brother died recently and his his bound to its microsoft computer email account. How can access us his computer? Microsoft won't release the password for us. Without the password, we cannot enter his computer.  Thank you very much for your help.

  Hello

  First of all, sorry to hear about your loss.

  Microsoft will not do what you want them to do.

  They just got emails, but no password, which is what you need for data on the computer.

  It's all explained here.

  http://answers.Microsoft.com/en-us/outlook_com/Forum/oaccount-omyinfo/my-family-member-died-recently-is-in-coma-what-do/308cedce-5444-4185-82e8-0623ecc1d3d6

  And no one in this community is authorized to provide information on how to "crack" passwords, or they are banned.

  It's the Microsoft Policy.

  All we can suggest is that you contact your local computer repair store, taking with you ALL the information about proof of ownership, death certificate, etc., and they may or may not help you.

  Good luck.

• How can I reinstall Windows 8 on an OEM laptop when I don't have the product key?

  I bought an Asus x401a laptop for my daughter as a Christmas gift. It comes preinstalled with Windows 8. Yesterday, the unit closed at key and we had to make a hard stop. On reboot, Windows will not start and instead came up with a screen that informed it was an automatic repair. This obviously didn't want to; the unit restarted and launched the auto repair, which once again. The third box... I had a few options: I could update the installation or reset it. There were several recorded files (we only had a few weeks), so I chose Reset, which if I understand correctly, it would clear everything and start over. After a while, another screen informed me that Windows could not reset the computer, who took over the entire process to the wire.

  I ran across this process several times, each time with the same result. I do not think that anything is actually wrong with the material (such as menus and other seem to work correctly; I think it's maybe just a corrupted file system) and I'd like to do a reinstall of the operating system, as it came from the factory. This is where I ran into my problem:

  • I can't download the Microsoft operating system legitimately, without providing the product key in the download tool
  • The product key is apparently built into the BIOS and not print anywhere, so I can't find my existing key without some sort of tool
  • Various tools are available to 'sniff' the product key from the BIOS, but because Windows is not running, I can't use them

  So my question is: exactly what should be my next step? ASUS would have a copy of the key related to my serial number, etc.. ? Should I install an old copy of Windows 7 just so that I can run a utility to get the key from the BIOS, or who will replace the number by something else? Or is there perhaps some way I can get the key of product directly from you?

  I like to keep Windows 8, as my daughter has already learned the interface, but at this point, it looks like this may be impossible by design.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I understand that you reinstall Windows 8 in the OEM specifications.

  As it is the OEM of Windows 8 version, the system manufacturer will have more details in this regard. I suggest you contact the manufacturer of the system.

  http://support.ASUS.com/contactus.aspx?SLanguage=en

  Hope the helps of information. If you have questions about Windows, feel free to post. We are here to help.

• I bought this computer and there windowvista how to change password of ADM when I don't know the old one

  I bought this pc on ebay it has windows vista I dony are called admimistratorpasswor or user now, I have a pc I can not use and I don't know what to do about this

  Hello

  If you have a Windows Vista disk installation, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

  You can contact the resolution Ebay seller.

  Concerning

• How can I start private browsing when I don't have a "Firefox" button click?

  "Open a new window empty private."

     At the top of the Firefox window, click the Firefox button and select New Private Window. A new Private Window will open.
  

  "

  That's what he said! But where is this Firefox button at the top of my window of Firefox (v 20.0.1)? What I have at the top of the window is:

  (1) a bar of blue background with the Firefox icon and the title of the current page

  (2) 2 bars gray background with buttons and menus (file, editing,...)

  (3) 1 bar background gray with the bookmarks bar

  (4) the tab bar

                                   But no Firefox button, and none available in the customise dialog. Have I suppressed it somehow?
  

  Hello, the private browsing window is accessible via the file menu that you referenced too - or you can use keyboard shortcut ctrl + shift + p.

  If you want to get the interface by default with the firefox button well, go to view > toolbars and disable the menu bar...

• How can I download previously purchased physical Internet LR?  Have the new computer laptop thin wo CD slot.

  How to download LR program I bought on the internet via amazon who has the box and the cd, but my new thin laptop has no CD slot?

  You can also buy an external cd/dvd drive unit. They are not expensive.

  And here's one for £14.00 ($20 EA.) ...

  http://www.Amazon.co.UK/DP/B0045CWOBC

  Anthony.

• How to by pass windows password when you're stuck on the computer, I can verify my identity

  I tried to install a new driver and suddenly I locked, I tried various methods to correct my mistake, including mode safe mode with internet connection no chance!

  I tried to install a new driver and suddenly I locked, I tried various methods to correct my mistake, including mode safe mode with internet connection no chance!

  You the problem is that you are unable to "verify your identity" to the computer.

  This MS Answers forum does not allow anyone help users to bypass the password protection.
  Here is the link to the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  The only suggestion that I am authorized to offer you is to reinstall Vista.
  Other that that, I can't help you.

  I'm sorry.