How to disable ipv6 on last Time Capsule?

I have Cox internet and they tell me that I have to disable IPv6 on my Time Capsule for my internet service to resume properly.  Anyone done this before?  The only options seem to be disable sharing of ipv6, but I need to disable ipv6 on the networking of the device as it connects to my cable modem...

Anyone done this before?

Not on a Cox connection, but this should work until Cox fully implements IPv6.  The number of positions that we have seen... they have yet to do.

On your Mac...

Open Finder > Applications > utilities > AirPort Utility

Click on the image of the time Capsule

Click on edit in the window that appears

Click on the network at the top of the next window tab

Click the Network Options button near the bottom of the window

Make sure that the IPv6 configuration is set to Local link only

Click Save

Click Update at the bottom right and give the time Capsule a minute full to restart

At this point, it would be wise to turn off the modem and the Time Capsule.

Wait a minute

The modem only... lights and let it run a few minutes

Turn on the time Capsule and let it run for a minute

Check the network

Tags: Wireless

Similar Questions

  • How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

    Hello

    How can implement you not with Time Capsule and AirPort their simulation on the iMac?

    I don't know what you're asking.

    AirPort Extreme is a wireless router.

    A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

    An iMac is a Mac computer.

    An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

  • How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

    How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

    There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

    I don't understand what you're asking...

    If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

  • How to read the files on time capsule

    How to read the files on time capsule from iPad?

    Thank you

    Using an application like navigation on the iPad. More info here:

    Stratospherix - FileBrowser - overview

  • How do you find the last time that an address older Windows Live Hotmail has been used if you don't remember the password?

    How do you find the last time an old hotmail address was used... especially if you can't remember the exact password?

    original title: old hotmail address

    How do you find the last time an old hotmail address was used... especially if you can't remember the exact password?

    Good enough if you can't on the account and you can't prove it is yours in order to regain access (via password self-service reset, etc)-then you won't know anything about the account.

  • How to disable IPV6 for the LOOPBACK address in windows vista

    Hi all

    I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

    So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

    Help, please

    http://www.lboro.AC.UK/it/Vista/IPv6.html

    There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

  • How can I connect my Airport time capsule to the nbn optus

    I just got the NBN Optus connected and time capsule doesn't seem to work, can anyone advice on how to connect. I connected to a modem (Sagem Fast 38640op) with cable but the mac does not expect a return to the top

    You should do a full factory reset on the TC...

    Repeat the installation... and it should work correctly in bridge and create a wireless network.

    The Sagemcom really poor wireless but you can leave it on... use it for your network wireless of comments.

    This is my normal configuration guide... but there are a few specific pieces to network problems with the operating system later as Yosemite or El Capo.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually.

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

    Let us know how you go.

  • How to change network name on Time Capsule

    Hello

    I want to change the name of the network on my Time Capsule, to match that of my home, all other routers network so I can use it as an access point more easily.

    How should I do it under OSX?

    Thank you.

    Open Airport utility, click on the Time Capsule icon, then click on modify in the window pop up.  Then go to the wireless tab, network name can be changed here.

  • How can I find missing backups time capsule?

    Installation of El Capitan in September caused my incoming mail to stop after a certain point, although he showed millions of so-called items waiting to be downloaded. After many attempts of troubleshooting, I went with my last resort for fitness and do a clean install of El Capitan.

    When I went to my Time Capsule to restore my documents and applications showed none of my previous backups using the Star Wars. There are available dates in the timeline view, and the time Capsule shows my oldest as backup being December 1, 2015 after I ran the backup check, but I don't see anything beyond yesterday.

    Backups must be present on the Time Capsule, because it shows "tuberculosis 1.14 2 TB available." My sparsebundle (only 13.2 MB) indicated no mountable file system when I double click on it. It also has . tmp.sparsebundle as the extension. There is no other sparsebundle showing.

    I was looking for answers online and this forum and have yet to find a resolution. My first care in disk utility failed after a few hours, then immediately when I tried again. Any suggestions? Is it useful to fitness again? I did not choose the time Capsule to restore initially. I wanted to see if the mail would work before putting the time restore everything.

    Thank you

    Linda

    MacBook Pro (early 2011) El Capitan 10.11.3

    Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

    If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.

    The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.

    The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.

    Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.

    The next part is 'Users', followed by a slash.

    Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.

    Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.

  • How long backups stay them airport time capsule if I make my computers of restoration

    I want to completely wipe my MacBook Pro and set it up as if new to it clear of files that I don't use often, but I want to keep these files on my Time Capsule airport.

    Ive seen a lot of posts about how after a random time ATC (airport Time Capsule) automatically deletes files that are no longer on this computer that you backed up previously.

    QUICK SUMMARY OF THE ISSUE: can I have factory restore my computer and leave my old files to my Time Capsule airport or do I have to connect an external drive to ATC?

    Thank you

    Firefox

    Connect an external hard drive to your computer and put the files it contains. The files you want to keep should be at least two disks; You can fail at any time.

    This can be done when the drive is connected to the time Capsule, but supported formats are more limited, and the process will be slower.

    (13169)

  • How can I move pictures to time capsule

    I use a retina Macbook Pro with 256 KB of flash memory.  I approach a Time Capsule purchased and total storage capacity to increase storage.  How can I move photos of the capsule, or in the cloud?

    Do not move a library of photos to the TC... photos is designed to operate from a local disk or iCloud.

    Move the library to icloud, you should ask in the photos section.

    There is a lot of help documents to find out how.

    iCloud Photo library FAQ - Apple Support

    You can also move the library on a USB drive that you plug into the Mac.

    Still, there are a lot of instructions on it.

    How can I move my library of photos on an external drive?

    http://Apple.StackExchange.com/questions/183318/how-to-put-photos-app-main-Libra ry-on-an-external-disc

    If you move the photo library to the TC... it might work for a while, but because of the way the library is open when you change directly a file inside the library... If wireless fails, it can let the corrupt library... Some people ignore the problem... some people take care to use it for storage and run a small library for current materials on the Mac... and Exchange libraries... which is fine... as long as you don't change on the source of the network.

    Be warned... the photos are perhaps the most valuable items on your computer, once moved to the TC you have no backup and no way Time Machine can do backups of disks of backup network... so, if you're moving not the CT library... Please make continuous backups either manually... or knowing human frailty to buy a tool like carbon copy clone which is not limited like Time Machine for disks of local backup only. You will need to know where you're going for the backup of... but if it's a USB on your computer then you are simply running it the wrong way. The library must be on the local drive and backup on the TC as it was always intended to work.

  • How to quickly delete files from Time Capsule?

    I need to delete some files from a Time Capsule, but it takes a long time.

    I expect files to be deleted immediately as they do through Finder on my MacBook Pro.

    They are not backups Time Machine - just different files.

    Probably, somewhere I have an incorrect setting.

    How can I delete the files quickly?

    Thank you

    I expect files to be deleted immediately as they do through Finder on my MacBook Pro.

    Your computer has a 6GByte/s hard disk interface.

    If you use wireless to the TC your computer has a 30MByte/s interface hard disk... According to real connection speeds...

    Mac OS is extremely inefficient handling of deleting the file... What questions not at all on the interface internal very quickly... but a lot slower wireless links issues...

    Use ethernet on your computer... If you do not have ethernet buy love at first sight for ethernet card... It is the best and the best lightning shot that you can buy.

    El Capitan can have made improvements in this area... But apple needs to improve how basic disks are formatted on the Mac that is ineffective. It will not happen soon.

  • How can we get the last time of reboot of the device in bb10

    Hello

    can we get last time when starting the device developing native blackberry 10.

    Yes you can.  This message has the answer: Re: 'Boot Time' BlackBerry 10

  • How to disable alerts from travel time calendar

    From iOS 10, I get calendar alerts, not 5 minutes before my meeting (which is what I said), but rather these travel alerts in time talk about traffic conditions and if I leave now, I'll make my meeting... or something to that effect.  Is it possible to disable these and have just alerts timed static normal that I specify.

    And besides, all my calendar events have time to travel the value 'None '.

    Thank you.

    Hello JupiterOne,

    Thanks for this info and choosing the communities Support from Apple. I know how to turn off this alert leave time is important to you! The good news is that these steps will be useful in solving your problem with this alert calendar events, you can go to settings > calendar > default alert time and disable the time alert off. This will transform this AutoFix to this alert feature.

    Calendar at a glance

    See you soon!

  • How can I move my old TIme Capsule at the new Time Capsule backup files?

    For five years, I use a 2 TB TC. It is also the main router wired into my local network.

    Have the new TC even router feautures?

    If I buy the new TC I would like to transfer the backup files stored in the current TC. Is this possible? How?

    Thank you very much for your support.

    Beppe53

    1. Yes.

    2. click here and follow the instructions.

    (144542)

Maybe you are looking for