How to disable the default ISAKMP on Cisco 2800 router policy

Similar Questions

• How to remove the default isakmp on a ciso router strategy (3845)

  Hi all. My company recently failed a PCI scanning as our router returned the 56-bit encryption for negotiation isakmp on an existing default isakmp policy. How can I remove this default isakmp policy. I'm not under 12.4 (15) T1 so no crypto isakmp default policy does not work. Is there one way other than the upgrade of the IOS? Any suggestions?

  Is it possible to configure a maximum number of isakmp policy authenticating a router checks? I have 2 strategies more priority configured ISAKMP. Perhaps if there is an order to limit the number of policies isakmp router checks, it would eliminate this default policy with?

  Thank you.

  Disabling the default isakmp policy is only supported since IOS version 12.4 (20) T leave. Earlier version does not support turn them off by default

  ISAKMP policy.

  Here is the command for your reference on when it was released:

  http://www.Cisco.com/en/us/docs/iOS/Security/command/reference/sec_c4.html#wp1051491

• Disable the default ISAKMP policy?

  Y at - there no way to disable or change the default ISAKMP policy?  I created the number 20 of the police, which is used in a VPN site-to site in vain for a quarterly PCI analysis the results come back in due to stage successful 1 authentication with encryption DES/DH768.  I reproduce these results with the help of ike-scan with explicit parameters OF/DH768.

  This is a 2600 router and I just upgraded to 12.4 IOS (23) because I came across (http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html) Cisco documentation which says that 12.4 (20) introduced the "no crypto isakmp default policy" - but I do not see this command still available to me.  Here are the results of sh crypto isakmp policy:

  Priority protection suite 20

  encryption algorithm: three key triple a

  hash algorithm: Secure Hash Standard

  authentication method: pre-shared Key

  Diffie-Hellman group: #2 (1024 bits)

  lifetime: 86400 seconds, no volume limit

  Default protection suite

  encryption algorithm: - Data Encryption STANDARD (56-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: Rivest-Shamir-Adleman Signature

  Diffie-Hellman group: #1 (768 bits)

  lifetime: 86400 seconds, no volume limit

  Any help would be greatly appreciated!

  Hello Anthony,.

  I saw the link you provided.  It seems that this command was introduced in12.4 (20), T... note the T.  This indicates that it is only in the T-train train or technology and only seen in some other 12.4 T code or the train from 15.x newert.

  You say that your router is runnign 12.4 (23) implicitly code Mainline (M).

  The last T code for 2600 seems to be a 12.4 (15) T, so it does seem that you can enable this feature in order to disable the default policies.  It also seems that the 2600 series retired as no new code is released March 27, 2010.

  http://www.Cisco.com/en/us/products/HW/routers/ps259/prod_eol_notices_list.html

  Looks like you can be out of luck and may need to look for in buying a newer model router to get the newest software support and the ability to disable the default isakmp suite.

  Of course, it is noted that while they can establish a session ISKMP, however, they will really be authenticated by the router in message MM 5 as most people use internal cases for certificates on the VPN.

  I hope this helps.

  Kind regards

  Craig

• How to disable the default e-mail account?

  Hello all, thanks to you I downloaded K9 & it works fine - TY much. The only problem I have is that I get now 2 sets of emails, 1 of K9 & one of the default email application. I know it should be easy to do, but I do not know how to turn it off.

  Help, please.

  Ty

  Kind regards

  JIm

  JIm

  You cannot disable the default Gmail account.  It is obligatory on the phone.  However, you can turn off notifications in the Gmail app.  That should eliminate the second notification.  Open the Gmail app and press Menu-> settings and uncheck the box to mail notifications.  This should take care of your problem.  I hope this helps.

• How to disable the default action with ButtonField

  Hello

  Here's what I get "my custom action" when you click on a button:

  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  my custom action
  };
  };
  ButtonField myButtonField = new ButtonField ("Test button");
  Add (myButtonField);
  myButtonField.setChangeListener (listener);

  But when I click on the button shows a list of 3-point default choice. How can I disbale this list?

  Thank you.

  Something like that...

  ButtonField myButtonField = new ButtonField (button "Test", ButtonField.CONSUME_CLICK);

• HP Pavilion Notebook Gaming -: how to disable the default f key functions

  Hello, I'm a gamer so I need to use the f keys in some games, BUT I can't use the f in game because it reduce my mess of brightness with my sound and much more.

  so, how can I change the f keys, reach the deafult option, I have to press the fn key AND the f key?

  Thank you very much!

  Hello

  It can start pretty quickly

  Try the next method.

  Hold the left SHIFT key you click Shutdown to temporarily prevent hybrid boot.

  Let off the laptop computer for 10 seconds.

  Start by typing esc button permanently as soon as you press the power button (do not wait for the prompt) and see if it will access the start menu - if that is the case, select f10 to open the Bios Menu.

  Kind regards

  DP - K

• How to set the default value of the FF browser offline mode? I WANT IT IN OFFLINE MODE *.

  I wish that my FF browser opens in offline mode. There is a ton of help topics on how to disable the default offline, but none on how to activate it. I tried to do the opposite of what people suggested to turn off offline mode, but nothing seems to work.

  Thanks adavance for any help!

  The only way to start Firefox in offline mode is through the start of the Profile Manager window.
  
  This window contains a checkbox to start in offline mode.

  • https://support.Mozilla.org/KB/managing+profiles

  All other methods via prefs may or may not work reliable and extensions usually do the opposite and are trying to force a boot online.

• 11g: how to disable the ToolTip for gauge?

  Hello
  
  DVT:graph and dvt: gauge (type = LED) displays a ToolTip by default when you move the mouse over the series or leads.
  
  With dvt:graph you can set the property markertooltiptype to "MTT_NONE" in order to avoid this default ToolTip.
  For dvt: gauge, I can't find such a possibility.
  
  How to disable the default ToolTip for dvt: gauge too?
  
  Jdev 11.1.1.0.2
  
  concerning
  Peter

  Hi Peter,.

  For a gauge, the best way to turn off the ToolTips is to use the attribute renderImagemap with imageFormat = "PNG". For example:

  If instead, you decide to customize the ToolTips of the gauge, you can use the alt attribute to shapeAttributes (without the renderImagemap = 'false'):

  
  
  
  
  

  Hope this helps,
  Hugh

• How to disable the screen saver

  Hello world

  Does anyone know how to disable the screensaver for Winodws 7 via Group Policy or regisity.

  Thank you

  Ivan

  Hello

  Thanks for your posting in Microsoft Community

  Open the Start Menu and type gpedit.msc into the search box and press ENTER.
  When the local Group Policy Editor opens, navigate to User Configuration-Administrative Templates-Control Panel-personalization. Then in the right column, double-click on prevent the background screen change.
  Now, check the radio button next to Enabled, and then click OK.
  Back on the screen of group policy, double-click on prevent changing the screen saver.
  In the next screen select the next radio button to activate it, click OK, and then close the Group Policy Editor.
  If you click on to change the screen saver, an error message appears to let them know that the function is disabled.

• How to disable the mac os 10.11.5 user comments?

  Hello world

  I managed to hide from the guest user at startup on my Macbook Pro. But with the last update came back again. Can anyone such me how to disable the guest on mac os 10.11.5 user?

  It is a part of the default value of the OS X system. It lets you allow guest access to the computer that is very limited, thus protecting your data. It is not supposed to be deleted.

  Tip for the disabled guest user appears at startup

  Disable the guest user on Mac OS X Lion login screen 10.7.2 account

  How to disable the guest user | Apple support communities

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js

• Satellite Pro P - how to disable the hot keys for camera assistant?

  Is it possible, and how, to disable the shortcut keys for the camera wizard?

  The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

  I find this very frustrating.

  Hello

  Of course you can turn it off.
  You must remove the software from the camera in msconfig start up.

  So go to start-run-msconfig online online
  Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

  Good bye

• How to disable the Apple Photos

  How to disable the Apple Photos when importing photos (ambient light).

  There are two ways:

  1. When you connect your camera or your iPhone to your Mac and your Photos opens go to the import window and uncheck this box:

  

  However, if you use a device with a memory card and reformat card Photos will think it's another camera and Photos will be open again.

  2. to disable form opening automatically when any camera is attached permanently to Photos, iPhoto or Image Capture paste the command following in the Terminal window, followed by the return key or enter:

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  Change Yes to no reverse the order