How to disable the driver during the boot process?

Similar Questions

• How to disable the export process

  Hi guru
  
  We have an FDM application that requires some places only proceed in what concerns the stage post. We want a simple method to disable the export process.
  
  Sites meet this criterion place within specific control groups and have specifically formatted place names which makes it very easy to registering via the script. For example, all this fine location with '_PADJ '. A preliminary event to the export script can test and trap this condition but I can't find any mention as to how the export process that was started can be terminated through the API.
  
  Any advice greatly appreciated

  Create a second target adapter and assign it to those places. Under the integration of this adapter settings, uncheck the option 'enable the load '.

  Please remember answers correct & useful flag as well as others may benefit

• How to disable the boot into single user mode SIP?

  Hi all

  My MacBook Pro (bought in May 2011, out of warranty at this stage) is not able to start. I think that the graphics card is dead, I can boot into single user mode and run the Apple Hardware Test (no problem found). I found this acticle (https://people.cam.cornell.edu/~zc227/extras/early2011mbp_graphics.html), but I can't follow the steps to start the Mac to avoid the AMD card, such as the SIP is activated (cannot move road file extensions).

  I can't boot into recovery mode, due to the inability to start the graphical mode. Any other way to disable SIP?

  Thanks in advance.

  Ana

  In the developers page: security configuration is stored in NVRAM, rather than in the file system itself. As a result, this configuration applies to all Mac OS X installations across the entire machine and persists through installations of OS X than Protection of the integrity of support system.

  To enable or disable the Protection of the integrity of the system, you must start on recovery OS and run the csrutil(1) command from the Terminal.

  Integrity https://support.apple.com/en-us/HT204899 Protection System

  This command can be run without root privileges and will tell you whether or not the SIP is enabled.

  to find out whether the SIP is enabled or disabled, run

  status of csrutil

  to disable SIP:

  copy & paste the following and then press ENTER:

  csrutil disable

  To activate the SIP

  csrutil enable

  After activation or deactivation of the Protection of the integrity of the system on a machine, a reboot is required.

  There are some options here:

  NetBoot and NetInstall NetRestore requirements in OS X El Capitan - Apple Support

• How to disable the boot on Satellite L305D-S5893 Toshiba start screen

  Is it possible to turn off or disable the startup splash screen? Not that I mind the Toshiba brand but the screen is simply ugly and I'm starting to find it boring.

  Current product: L305D-S5893

  Thanks in advance,

  Hello

  If the BIOS doesn't contain options to activate the plash screen Toshiba ON / OFF then it is not possible to disable the Toshiba start screen.

  I put t know what you mean by + screen is simply ugly + but my Toshiba home screen appears for a sec and its ok.
  It s definitely not boring

• How to disable the boot Maintainersvc service?

  Trying to help a friend with WIN7 system which is slow. I see that, according to start services that it ia a program Maintainersvc 1.92.5302915 listed an unknown manufacturer.  I can disable it but it should be here and should he be removed somewhere else?

  Thank you

  Ron

  This was written for Windows 8, but much of it can still apply: difficulty of slow, slow PC

  Also on the service: unchecking it there on the MSCONFIG tab should be sufficient, as long as this isn't a malicious service that reactivates itself. You can also run services.msc in the box run to open service managers and completely disable the service. Or, view the properties for the file name, the service runs to leave and even take the step of deleting this file (I recommend only put in the trash until you are sure it is safe to delete completely - better safe than sorry).

• How to disable the icon "power optical drive?

  Hello world
  Anyone know how to disable the taskbar icon "player optical power" or how to disable the service? I don't find in Services, msconfig, not even in parts 3 publishers register Jv16 PowerTools as Cc Cleaner...

  Thank you very much
  Walter

  Hello

  I have the same icon, you can right click on this icon and choose:
  Disable automatic locking optical drive->

  But I don t think it will disappear the taskbar icon.

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

  Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

  When you click on "Contact us" on this page: Activation & deactivation help

  You will see the chat option listed.

• How to disable the close button during execution

  Hello world.
  
  Please help me how to disable the close button at the top of the window during execution. I don't want the user to use this button to close. I used the button called out in this form but sometimes users of closing by clicking this button.
  
  I use the formula of Oracle 10 g R1.
  
  Thanks in advance,

  Or if you want to stop the closing by button close the main WINDOW. Then create a trigger on called KEY-OUTPUT at the FORM LEVEL and just write the value NULL ex.

  Trigger = KEY-EXIT (FORM-LEVEL)
  NULL;
  

  -Clément

• How to disable the shortcut of Windows 8 F1

  Whenever I click on F1 he opens Windows Help and Support. I read on the forums about how to to disable it but none for Windows 8. I need the F1 key for games.

  KleinC,

  If you press the ESC key when you turn on the computer, it should give you a start menu.

  Select Configuration of the BIOS (F10). This will take you to a configuration utility. Arrow during setup of the system.

  You should now have the option to disable the action keys.

  Here is a link that will show you how to disable the action keys.

  I would like to know how everything goes.

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• How to disable the Touchpad in windows XP...

  so, anyone know how to disable the touchpad mouse in notebook Lenovo G410? Is there software available for this?

  I use windows xp. I downloaded ALPS touchpad drivers and support from lenovo, but I does not work there is no functionality in the software. pls help...

  Thank you

  The f

  Hi Jeff,

  I also confronted the irritating touchpad on lenovo.

  Go to synaptics.com, download pointer driver for your operating system and install.

  You have the choice to disable the pointer of the ps2 that is touchpad.

  Disable the ps2 pointer indicated as mouse.

  Girish

• How to disable the start on Satelite P200-1E9 menu?

  Satellite P200-1E9... every time I turn on the phone it displays "enter the bootmenu" and I have to select a boot device. There is no way to disable the boot menu.
  BIOS is 2.70. I can t find an option to turn off the bootmenu.

  How can I solve this?

  Greetings

  Volker

  You put the BIOS to the default settings already?
  What did you do in reality? I mean since when it starts to appear on startup?

• How to disable the touchpad?

  HP Compacq Presario CQ60-615DX laptop Windows 7 32 bit - home -

  1. I would like to know how to disable the touchpad.

  2. my cursor has developed a mind of your own. I start typing and it hops at all where he wants when he wants. Needless to say, I am constantly fix and fix.  For example, while I was typing this--the cursor went as far as the subject line and typing continues between words turn off and touch; This happens online or in Word for example. Other times the movement of the screen where she wants when I type, even if it is not as common. Need help please it makes me crazy! PS - I'm not a sophisticated computer user. Thank you. Ldyjane

  Click on start

  Select, control panel

  Click on hardware and sound

  under devices and printers, you will see the link 'mouse' click on this will open up the mouse properties

  (according to the touchpad on your laptop you can have an exter tab after the Hardware tab click on it and you can disable from there if it isn't...)

  then...)

  Click on the material"tab

  Search, select your mouse (which will be a touchpad etc etc)

  then click on properties

  Click on change settings

  Click on tab "driver".

  Click on disable

  you will receive a message (read it if you want) click Yes

  Click ok

  another message will be apper asking to restart click Yes

• How to disable the PING response to 8132F

  Hello

  As the title, how to disable the PING response to 8132F to protect some guys ping the switch during its use as a gateway.

  Thank you!

  Use the ip to answering icmp echo command to enable or disable the generation of

  Response to ICMP echo messages. No form of this command to prevent the

  generation of ICMP echo responses.

  Console (config) # no ip icmp echo-reply

  Page 1512 cli Guide.

  http://bit.LY/1LxWT9o

  See you soon