How to disable WebVPN attributes in the configuration file

All the attributes of sudden webvpn (illustrated below) make their appearance in my config file? I disabled protocols tunnels webvpn in my default group policy, but that did not help. Anyone has an idea where completely disable it so it will not be displayed in my config file?

Thank you.

= part of config which shows webvpn =.

attributes of Group Policy DfltGrpPolicy

No banner

WINS server no

DNS server no

DHCP-network-scope no

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout no

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec

disable the password-storage

disable the IP-comp

Re-xauth disable

Group-lock no

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

by default no

Split-dns no

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout 30

disable the IP-phone-bypass

disable the leap-bypass

disable the NEM

Dungeon-client-config backup servers

the firewall client no

rule of access-client-none

WebVPN

None works

HTML-content-filter none

Home page no

4 Keep-alive-ignore

gzip http-comp

no filter

list of URLS no

value of customization DfltCustomization

port - forward, no

port-forward-name value access to applications

SSO-Server no

value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information

SVC no

SVC Dungeon-Installer installed

SVC keepalive no

generate a new key SVC time no

method to generate a new key of SVC no

client of dpd-interval SVC no

dpd-interval SVC bridge no

deflate compression of SVC

Hello

Try the below command. See that it works.

attributes of Group Policy DfltGrpPolicy

No webvpn

Thank you

Gilbert

Rate this post, if this can help!

Tags: Cisco Security

Similar Questions

  • change the value of the location attribute in db jca file with the configuration file

    Hello

    How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

    I have the database map file where the first two lines are:

    < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

    < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

    ...

    I need to replace the configuration file

    EIS/DB/CRP1

    with

    EIS/DB/DEV

    but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

    Please share the idea.

    Thank you

    Anatoliy

    Anatolly salvation,

    You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

    Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

    In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

    (edit)

    If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

    When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

    See you soon,.

    Robert van Molken

    Specialist of the integration of Oracle

    Post edited by: robertvm

  • How to disable "Search with" in the url bar in Firefox Developer?

    How to disable "Search with" in the url bar in Firefox Developer?
    Thank you

    Hi hamid, in order to change this enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.urlbar.unifiedcomplete. Double-click it and change its value to false.

  • Disabling update the configuration file without stopping the VI

    I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

    I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

    I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

    Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

    Thank you very much.

    There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  • How to disable a machine of the creative cloud?

    How to disable a machine of the creative cloud? I have 2 machines and you want to disable a. Thank you

    Hi Peter,.

    To disable creative cloud on any machine, simply log out of the desktop application creative Cloud.

    You can view the document to help with the steps below:

    Sign in, sign out | Creative office cloud app

    Kind regards

    Sheena

  • How to remove the value of the XML attribute in the Indesign file with javascript

    Hi all

    How to remove the value of the XML attribute in the Indesign file.

    1.jpg

    What error is this?

    in any case try this as well (one another),

    var myDoc = app.activeDocument;
    attrDelete(myDoc);
    function attrDelete(elm)
    {
        for (var i = 0; i < elm.xmlElements.length; i++)
        {
            try{
                for(j=0; j
    

    Vandy

  • How to disable certain fields in the form of a calculation with a checkbox for the fields.

    How to disable certain fields in the form of a calculation with a checkbox for the fields.

    In Canada, we have taxes

    I create a form that allows them to calculate a total

    Shema-pdf-form.gif

    I need to be able to turn off all of those taxes to participate in the calculation and to their field visible should be 0

    I was thinking about using a check box (when the checkbox is enabled (Yes) the tax is calculated, unchecked (Off) the tax is not calculated and visible field should show 0 or anything...)

    I really need help on this one, I am a complete newbie...

    Note that the second tax is calculated on the sum of what the first tax Add (tax first is pan-Canadian tax (all provinces).

    The second tax is never only use (Quebec only (in addition to one Canadian)

    Sometimes to sell outside Canada - no tax at all is calculated...

    What should I do?

    Yes, it's just the JS...

  • How to turn off AutoComplete, using the config files - NOT using the Options &gt; privacy...

    Hello
    I have about 300 computers across the country that needs to turn off the AutoComplete for forms feature.

    Of course, it wouldn't be possible remotely on each machine and change the setting in Options > confidentiality > Firefox Will... > use the custom settings for history > remember search and form of history - it is not practical to use the subject: config screen because the address and toolbars are disabled by default to prevent users from navigating to other pages they are not intended to.

    I was wondering if there was a configuration file or a registry setting where I can change this setting in the backgorund, we can push the configuration files or a registry in a manner change on all the machines that would change this setting.

    Any help would be greatly appreciated.

    Dan

    I realized that you can not hide the AutoFill menu drop-down CSS anyway so abandoned that idea.

    I think that what follows in the prefs.js file could work, however, I am yet to try it on a PC it will be pushed out to. It works on my machine that I can see if:

    user_pref ("browser.formfill.enable", false);
    user_pref ("signon.rememberSignons", false);
    user_pref ("access code. "prefillForms", false);

  • Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

    Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

    I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

    I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

    There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

    The only program I installed XP mode is this one.

    Thank you.

    Hugh Humphreys

    Hi Hugh Humphreys,

    Leave the password empty section and see if the XPMUSER can be accessed.

    Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

    (a) Firstly, disable the integration features.

    (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

    (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

    (d) log in Windows by using the administrator account and the password.

    Note: The password is empty by default unless you already set a password.

    (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

    (f) choose the user you want to change and click 'reset password'. Set a new password.

    (g) click on "Advanced" tab, click on the button "Advanced".

    (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

    (i) check the "password never expires". Click on 'OK'.

    (j) then exit the settings and restart Windows XP Mode to normal mode.

    Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

    (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

    (b) set a password for your current user.

    (c) click on tools on Windows Virtual PC, choose enable integration features.

    i. type the password, check the box "Remember my credentials" and click OK to open a session.

    II. after joining the domain, logon in XP mode with the local administrator account.

    Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

    If this does not work, post your request in the TechNet forums to get help.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  • Check the size of the configuration file

    Hello all,.

    I'm about to pass a PIX 525 of 5.3 to 6.3 software and I'm working my way through the release notes.

    I would check and see the size of my config file on a slice of PIX 525 in failover mode.

    We have a little more than 1500 lines in the configuration file, and I'm curious to know how this configuration is.

    Does anyone know how to do this?

    Thanks in advance.

    concerning

    Amanda

    Is the command that you want to take a look at 'sh flashfs' and here is what the output you get:

    For a file system of version 2 (6.0 and 6.2)

    folder 0: pix image

    file 1: config

    file 2: certificate information

    file 3: image of pdm

    folder 4: file system folder

    For a file system of version 3 (6.3)

    folder 0: pix image

    file 1: config

    file 2: certificate information

    file 3: image of pdm

    folder 4: crashdump

    folder 5: recording of file system

    Let me know if you have any other questions.

    Scott

  • CMDTUX_CAT:754: ERROR: error parsing of the configuration files

    Hi Tuxedo Experts,
    I have compiled and related sample code Tuxedo client and server (simpapp). According to the README, the next steps is running y tmboot command. It starts smoking simpserv Server? If this is not the case, how can I start that?

    In addition, when I ran this 'tmboot-y' command, I get the error:
    ===========================================
    $ tmboot y

    tmboot: internal error: CMDTUX_CAT:754: ERROR: error parsing of the configuration files



    tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
    ===========================================

    Could you please help me with that.

    Thank you and best regards,
    Ahsan Asghar

    Hey Ahsan,

    Well, the error message says tmboot cannot find TUXCONFIG. If the TUXCONFIG environment variable has not been set or the tmloadcf command has not completed successfully to create TUXCONFIG. Whenever you login, you will need to run the tux.env file to set all necessary environment variables. If tmloadcf finishes successfully, it should have printed one or more of the error messages.

    Kind regards
    Todd little
    Chief Architect of Oracle Tuxedo

  • The configuration files are used to create this cache server?

    I start a cache server by running the $COHERENCE_HOME/bin/cache-server.sh file. But I don't how it is configured.
    The configuration files are used to create this cache server? How do I know?
    I check the contents of the cache-.sh file.
    In my view, the config.xml file - cache-coherence, consistency-pof - config.xml file and leader tangosol-coherence are used, no?

    After the start of a cache server, view the output carefully and you will find the configuration files are used. For example, the configuration files are displayed in bold background in the following text:

    F:\coherence\coherence\bin>cache-server.cmd
    java version "1.6.0_16"
    Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
    Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
    
    2009-11-30 22:46:06.468/1.547 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
    ational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-co*
    *herence.xml"*
    2009-11-30 22:46:06.484/1.563 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
    ational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-cohere*
    *nce-override-dev.xml"*
    2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
    iguration override "/tangosol-coherence-override.xml" is not specified
    2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
    iguration override "/custom-mbeans.xml" is not specified
    
    Oracle Coherence Version 3.5/459
     Grid Edition: Development mode
    Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
    
    2009-11-30 22:46:07.468/2.547 Oracle Coherence GE 3.5/459  (thread=main, member=n/a): Loaded c
    ache configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *coherence-cach*
    *e-config.xml"*
    2009-11-30 22:46:08.515/3.594 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Service
     Cluster joined the cluster with senior service member n/a
    2009-11-30 22:46:11.765/6.844 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Creat
    ed a new cluster "cluster:0xD7DB" with Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.1
    68.0.8:8088, MachineId=26632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceSe
    rver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A800080000012548585
    C6D68081F98
    2009-11-30 22:46:11.796/6.875 Oracle Coherence GE 3.5/459  (thread=Invocation:Management, member
    =1): Service Management joined the cluster with senior service member 1
    2009-11-30 22:46:12.515/7.594 Oracle Coherence GE 3.5/459  (thread=DistributedCache, member=1):
    Service DistributedCache joined the cluster with senior service member 1
    2009-11-30 22:46:12.593/7.672 Oracle Coherence GE 3.5/459  (thread=ReplicatedCache, member=1): S
    ervice ReplicatedCache joined the cluster with senior service member 1
    2009-11-30 22:46:12.609/7.688 Oracle Coherence GE 3.5/459  (thread=OptimisticCache, member=1): S
    ervice OptimisticCache joined the cluster with senior service member 1
    2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=Invocation:InvocationService,
     member=1): Service InvocationService joined the cluster with senior service member 1
    2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=main, member=1): Started De
    faultCacheServer...
    
    SafeCluster: Name=cluster:0xD7DB
    
    Group{Address=224.3.5.0, Port=35459, TTL=4}
    
    MasterMemberSet
      (
      ThisMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=266
    32, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      OldestMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=2
    6632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      ActualMemberSet=MemberSet(Size=1, BitSetCount=2
        Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=26632, Locat
    ion=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
        )
      RecycleMillis=120000
      RecycleSet=MemberSet(Size=0, BitSetCount=0
        )
      )
    
    Services
      (
      TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.8:8088}, Connections=[]}
      ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMembe
    rId=1}
      InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
      DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCo
    unt=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
      ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1
    }
      Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
      InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMember
    Id=1}
      )
    
  • Cannot find the configuration file in the classpath

    Cannot find the configuration file /oracle/apps/prc/po/...applicationModule/common/bc4j.xcfg in the classpath.

    Hello!

    I try to run the following code:
    String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
    String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
    ApplicationModule applicationModule = (ApplicationModule) Configuration.createRootApplicationModule (appModule, cfg);

    I get this error message:
    Exception in thread "main" oracle.jbo.ConfigException: Houston-33001: could not find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
    at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
    at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
    at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
    at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
    at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
    at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
    at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)

    I checked and the configuration file is in the correct directory, and I can see it in my Application Module - Configurations. No idea why this is happening? I need to configure something specially for it, or add it in my classpath? If so, how am I supposed to do?

    Thank you

    Mansi

    Published by: Mansi G on October 6, 2008 11:56

    Where is the code you posted? Running in a separate project, I guess? This project has a dependency on the project that contains the specified app package?

    And just to check (although by default, JDev should do it for you) - the project of app module has been compiled since adding the configuration, right? You should check that the config is not only the title of the project/src, but the title of the project/classes.

    Published by: Avrom Roy-Faderman on October 6, 2008 14:02

    Oh and BTW - I guess it's not an application typical of ADF, right? In a standard application of the ADF, you would very rarely need to instantiate one module application in code like this. You can only let the function of data binding for you. The technique that you use is the most appropriate for purely programmatic cases, no - UI. (for example, once I tried to put in place an SMTP server, supported by the business components. It was a case of ditching databindings and do the kind of thing that you do, because he had no layer view (because there is no user interface for rendering).

  • Failed to read the configuration file. New installation on windows 7

    I just downloaded and installed firefox on my windows 7. No error on installation. When I try to launch Firefox I get this dialog box. Configuration - the configuration file cannot be read. Please contact your system

    administrator.

    Note that you must delete the Firefox program folder to do a clean reinstall to remove the file that is trying to access the mozilla.cfg file which probably does not exist.

  • How to create a '. '. The URL file"of a Web page I visit

    How to create a '. '. The URL file"of a Web page I visit

    Check these

    deskCut {web link}
    This extension adds desktop shortcut creation for the
    context menu for Windows, Linux and Mac.

    My CopyFixer {web link}
    Use Ctrl + C when nothing selected to copy the page title and the url in
    various (base model) format.

    Send the URL of the tab {web link}
    Send a list of URLS tab browser to email, webmail or the Clipboard

Maybe you are looking for

  • Apple Watch astronomy in wrong place

    Recently my Apple Watch "became black." Still, he had the battery power but was totally insensitive and did not show a black screen. Restart the watch solved this issue. I don't know if it's related, but the face of Apple Watch astronomy used to have

  • Initialize sound on Y-series

    Curious to know if anyone has any prior knowledge on noise start on lenovo y-series (perhaps of other models as well) computers laptops it is not pregnant associated... it's like some futuristic tron-like super robot who awakens from sleep of its typ

  • Record video clips in Windows Movie Maker 2.6 using EasyCap DC60 +.

    Original title: Easycap how-to Record on Windows Movie Maker 2.6 HELP Well I have everyone agree, I was in need of great help I have windows Vista Ulitmate and I discovered this filmmaker windows 2.1 only works for XP but Windows Movie Maker 2.1 has

  • Flash Drive causes Windows Mail Crash when send link by E-mail is selected in Internet Explorer

    I am running Vista Home Premium 64-bit on an HP Pavilion laptop and a curious problem. When I have a flash drive into a usb port and when using Internet Explorer 8, click "send link by e-mail", I crash Windows Mail... the usual error message "stopped

  • Apex popup download

    Hi allWhen download us the Apex, the cells 'Null' data are exported as "-" ((tiret) dash) instead of blanks, can we override this property?Please let me know where I can find it?