How to disassemble the Qosmio F50?

Similar Questions

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• How to upgrade the Qosmio F50 with SSD

  I want to improve my Toshiba 50 F with a disc SSD 80 GB (Intel).

  Can anyone recommend an SSD, I would use Intel 80 GB.

  Do I need a Firmware Upgrade or update for VISTA?

  Thanks for help

  Hello

  Qosmio F50 taking care of a SATA HDD controller, you must use a SSD drive that supports a SATA interface

  But the SSD is not much different from a common HARD disk and so it should not be necessary to update any firmware.
  Usually, you need to install just a SATA driver to recognize the SSD drive.

  Welcome them

• How to use the Qosmio F50 Quad core HD processor in other software

  I would like learn how to use the image processor in other programs in addition to Toshiba Upconvert, transcoding, face Navigation and gesture of the functionality of the control. Someone has an idea? Thank you!

  I doubt that there are software available because the Cell processor is only a hand full of PC.

  If you have applications for creation of media professionals, you can get the plug-in to activate the cell processing.

• How to connect the Qosmio F50 to TV

  Hello!

  I would like to know what to do to connect my Qosmio TV ba.

  Basically, I want to be able to watch movies and videos that I create on my house. I can't find the usual cable output... Maybe there is a kind new cable for this. (I'm not an expert as you can see...)

  Thanks for your help!

  Nuno

  And what cable you want tuse?
  With other words, video output port that you want to use on your Qosmio laptop?

• How to configure the buttons on the Qosmio F50 - 12J LED?

  I've recently upgraded to Vista with Windows 7 Ultimate edition. I downloaded the drivers of value added package and it seems to work, but I can not configure some of the buttons because when I press the LED button and the support of key Toshiba starts there is not some options for the buttons that were there in Windows Vista...

  Is there a way I could add the same button options I had with Windows Vista?
  My laptop is the Qosmio F50 - 12J and I use Windows 7 Ultimate 64 bit.

  You installed a driver of Flashcard support? You can download it from:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• How to disassemble the Satellite Pro A60

  I need to open my Pro A60.

  I tried to delete all the marked screws B14 B8, B20 and F3, but there is still something preventing a complete separation around the area of the CD tray.

  Any help would be appreciated.

  Hello

  The Satellite Pro A60 is very similar to the Satellite A60.
  I found a very useful website that explains how to disassemble the A60.

  [How to disassemble the laptop Toshiba Satellite A60/A65 and replace the system board | http://www.irisvista.com/tech/laptops/ToshibaA65/satA65_1.htm]

  But note; everything you do are ALWAYS at your own RISK!

  Good bye

• Webcam on the Qosmio F50-126 error

  Hey... I'll try to keep this as short as possible:

  I used to use my webcam on the Qosmio F50-126 regularly. Until a few days ago the media key won t open camera assistant software Toshiba.
  Weird - I decided to go in the program file and open it from there. When I got tired running the application, an error message appears, said, I don't remember the exact words, but it was something like: "could not create the main/c, please reinstall the software I thought OK, I uninstalled all apps, rebooted, downloaded the installer and ran again the application.»

  I still get the same error... Help, please

  Nice! Great that you share it with us!
  Thank you!

• When the Qosmio F50 come out?

  I waited for the new Qosmio F50 for ages - all Toshiba information seemed to indicate he should be out, but it is impossible to find anywhere - and cannot all other info!

  The X 300 (who appeared in all the ads to launch the F50 and G50) now seems to be available.
  But there is now news, no reviews or anything on the F50.

  Everyone has heard about why it was delayed, or when it may be available (I'm in England)?

  Thanks in advance!

  Hello

  Already, the Qosmio F50 turned out!
  For example, the Qosmio F50 - 10 M was released on the German market.

  The Qosmio, Qosmio F50 - 10Z PQF55E-01J026EN there are already on the British market.

  Maybe you should Xbox a bit.

  See you soon

• How to disassemble the Camileo S10?

  I would like to hack the S10 to solve 2 problems:

  (1) put an adapter wide angle
  In fact, it is almost impossible, but to remove the plastic part in front of the goal allows access to the cylindrical part of it and to set an adapter wide angle

  (2) I need hold the S10 on a RC model to keep the device horizontal rather than vertical.

  With success, I start to disassemble the unit, remove the black plastic middle where the battery.
  I stop because I have no ideas how to disassemble the video screen

  Any person a link to Toshiba Service manual of the Camileo S10 or have an idea how to prove it?

  Hello

  I think is not so easy to disassemble a TV and must be carried out by an expert.

  If something is wrong with your camera, you should go to the authorized service provider nearest. Technicians can disassemble for you and they have these service manuals I think.

• Need some guide to the Qosmio F50-108

  Hello

  I was wondering if I can get a guide how on my qosmio F50-108... my fan makes a big noise really.
  I want to check what is going on... my warranty has expired 4 months ago... So can I get a guide please?

  Problem is that the "Maintenance manuals" are not a public document and cannot be downloaded.
  You want to disassemble your laptop and clen it upward?

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Re: Recovery disc creator does not work on the Qosmio F50

  Hello

  I recently got my new laptop Qosmio F50. I decided to burn the recovery disk and so I did. But during the burning process, I got an error that is:

  "Diference were detected between different folders:

  Source path: (origin)
  F:\HDDRecovery\SWImg\06907XPS.swm

  Target path: (I would translate as destination)
  G:\06907XPS.swm
  (error code: 02016F-3 c-00000000)

  Well, I've been through the posts from diferent on this forum and I didn't know of any help on this matter. Of course, I bought new DVD-R TDK and I also tried with verbatim DVD-R but it does not work.

  Anyone have any idea how to deal with this issue, because for example I have still no recovery disc and if something would have happened, I wouldn't be able to configure back my OS.

  Thanks in advance for your help

  Best regards

  Hello

  To me it sounds like the final burning self-check failed and the application couldn't t properly compare two files on the HARD drive and DVD.

  Why? It's not easy to say maybe the problem is with the DVD disc not fully supported, but I saw that you used the TDK DVD-R it are really good media and should run.

  Maybe you should try to update the firmware