How to disassemble the Satellite L40-139?

Similar Questions

• How to disassemble the Satellite Pro A60

  I need to open my Pro A60.

  I tried to delete all the marked screws B14 B8, B20 and F3, but there is still something preventing a complete separation around the area of the CD tray.

  Any help would be appreciated.

  Hello

  The Satellite Pro A60 is very similar to the Satellite A60.
  I found a very useful website that explains how to disassemble the A60.

  [How to disassemble the laptop Toshiba Satellite A60/A65 and replace the system board | http://www.irisvista.com/tech/laptops/ToshibaA65/satA65_1.htm]

  But note; everything you do are ALWAYS at your own RISK!

  Good bye

• Question about the battery life of the Satellite L40-139

  It's maybe a stupid question, but I have a portable Satellite L40-139 and the battery lasts less time, is this correct.
  In the power management, I chose energy-saving. I used to be a mobile system and it could take 2-3 hours. The answers would be great.

  The laptop uses Vista. Am I wrong?
  Well, I don't wonder that you can run Notepad only for an hour approximately.
  Vista needs for more resources as a BONE at the beginning. In addition, there are a few bugs in Vista, who have a bad influence on the performance of the battery!
  You can perform a search in internet for Vista and the problem of battery on laptops and you will find a lot of information.
  The same laptop with XP runs twice as long on battery as with Vista.

• How to disassemble the Satellite L550 - 11?

  Hello

  As the title suggests, I would like to know how to disassemble my laptop.
  I tried to remove all the screws, but the plastic bottom darn it didn't separate yourself dessu plastic.
  Anyone had this problem before?

  Hello

  The question is why you want to disassemble the laptop?
  I think this laptop is not very old, and I think that the guarantee must be valid
  Disassemble the laptop would negate the warranty.
  Are you aware of that?

  Disassembly laptop procedure, I really complicated and you should not try if you n t know what you are doing

  However, maybe you can find some information in the web, as page Toshiba does not provide any instructions on how.
  Search for irisvista.com/tech/

  Good luck

• A Wi - Fi connection does not detect the Satellite L40-139

  Hello!

  I have a problem with the WiFi connection on Toshiba L40-139 Windows XP Professional
  I have all the drivers for this model of the site.

  Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter has been installed.
  But during the installation there was an error "could not install the driver.

  If it detects a Wi - fi card by Device Manager
  When I try to connect to the Wi - Fi network, I got a message that it's not all Wi - Fi devices on my laptop.

  Help, please!

  Hello

  As I m wrong not the L40-139 PSL40E does support Atheros 802.11 wireless network card g.
  And that's why you should use and install the Atheros Wlan card driver!

  In addition, you must perform a BIOS update.
  According to some feedback here in the forum, the BIOS update to solve some problems of WLan.

  Check it out & good luck

  Good bye

• How to disassemble the Satellite Pro U200

  Hello

  Lately, I have come to the need of the back opening of Toshiba Satellite Pro U200, you know the place where RAM and all the other stuff is stored.

  I have my tired to do it, but I could not open, so I was afraid to break something.

  Any of you know if it is possible to open the back of the laptop?

  If possible, it would be possible to close it later? :]]

  What you want to change on the laptop? The RAM?

  As far as I know the locations of memory are placed under the keyboard. Therefore, you must remove the keyboard stand and keyboard.
  It's a little tricky and if you n t have experience with this that you should ask a technician for laptop help.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

  Hello

  I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing.

  I often watch videos online mode full screen (like on YouTube), but when I leave full-screen mode, I noticed that virtual scrolling stops working on the touchpad. This occurs in the latest versions of Internet Explorer and Firefox. I can still move the pointer, but cannot scroll. I also note that the icon in the taskbar freezes, because it does not meet all the movements on the touchpad. I have the latest version of the driver installed (10.0.3.0).

  Is it possible for Toshiba to issue an updated driver for the Synaptics pointing device which solves this problem?

  Thank you

  Hello

  It's the first time that someone has posted this question
  I checked this on my Satellite U400 and quest that; the touchpad works ok
  There may be a registry problem with your operating system who knows
  It would be interesting to know how the touchpad scroll function works by using the new OS installed

• Satellite L40-139 - possible to disable the low battery alarm?

  I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

  Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

  I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

  I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

  Any ideas?

  Hello

  Please check the BIOS settings.
  To access the BIOS F2 press Mobile start upward.
  There should be an option called something like low battery alarm
  Remember to save the changes before exiting the BIOS.

• Satellite L40 - 139 with the combination FN + volume problem

  Hello
  at first, I want to say sorry for may English. It's so good, but I'll try to explain my probblem.
  Yesterday I installed the XP system and everything works fine. After installation I can't press FN with the volume I want to say, some with works of function FN buttons, but some of them don't work. Only those function don't switch (FN + volume) volume of work and increase the volume level up/down(FN+ up/down arrow)

  Someone know how to fix/repair it?

  Marcin

  Satellite L40-139 belongs to the * PSL40E * series.
  Where did you find the Toshiba XP drivers for this laptop series?

  To my knowledge at THIS time the XP drivers are not released on the Toshiba driver page and so I guess that a driver missing XP or is not compatible BIOS might be the reason for you question.

  I think you have to wait until all drivers XP and BIOS XP will be available for you series!

  Greetings

• Cannot run the CHKDSK - Satellite L40-139 process

  When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
  He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

  I was wondering if someone can help me correct what I want to start the whole process.

  Thanks in advance.

  Hello

  You can run chkdsk after Windows has started.
  Type in the CMD COMMAND.
  The console should open and there you can use the command * chkdsk *.

  That's all.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Satellite L40 - 139 - I want to upgrade the RAM

  Hello
  My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).

  I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).

  Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
  Someone has the manual for this laptop motheboard, or may indicate the site for download?

  Apologies for my bad English.
  Thank you.

  Hello!

  Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
  If you use two modules, they run in dual channel mode.

  The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.

  Good bye

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Satellite L40-139 - how to get WLAN to work?

  I installed XP on my Satellite L40-139 of a disc that was my companion. Now I am unable to get my wireless to work.

  Is it possible that I can get it work?

  Hello

  What else have you got? Have you installed the driver WLAN? You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also, make sure that your device is turned on. Therefore, to use the material and the FN + F9 key combination switch.