How to: display a message while for loops, with no required user input
Hi everyone, I'm relatively new to LabView, using 8.5.
I want to display a message all in one for the loop runs, requiring no user input to delete the dialog box (that is to say, the box disappears after the end of the loop For).
Any ideas?
Thank you
Darren
Tags: NI Software
Similar Questions
-
How to move the Cursor parameter for loop with the type of table?
Hi friends,
I wonder how to pass a parameter into the second loop in the code example below. Please see the "BOLD" statements and to answer my questions.
Thank you very much. Here's the code.
declare
l_bom_header_tbl BOM_BO_PUB. BOM_HEADER_TBL_TYPE; -TABLE TYPE
V_bom_header_tbl Bom_Bo_Pub.Bom_Head_Rec_Type: = Bom_Bo_Pub.G_MISS_BOM_HEADER_REC; -Record type
v_bom_components_tbl Bom_Bo_Pub.Bom_Comps_Tbl_Type: = Bom_Bo_Pub.G_MISS_BOM_COMPONENT_TBL; - nested table type
c: number = 0;
k: = 1 number;
Start
BOMPXINQ. () Export_BOM
P_org_hierarchy_name = > l_org_hierarchy_name,
P_assembly_item_name = > l_assembly_item_name,
P_organization_code = > l_organization_code,
P_alternate_bm_designator = > '1Test. "
P_Costs = > l_costs,
P_Cost_type_id = > l_cost_type_id,
X_bom_header_tbl = > l_bom_header_tbl,
X_bom_revisions_tbl = > l_bom_revisions_tbl,
X_bom_components_tbl = > l_bom_components_tbl,
X_bom_ref_designators_tbl = > l_bom_ref_designators_tbl,
X_bom_sub_components_tbl = > l_bom_sub_components_tbl,
X_bom_comp_ops_tbl = > l_bom_comp_ops_tbl,
X_Err_Msg = > l_Err_Msg,
X_Error_Code = > l_Error_Code);
If l_Error_Code = 0 then
because me in 1... l_bom_header_tbl. COUNTING LOOP
V_bom_header_tbl.organization_code: = "DSC";
Can assign us a table type of guy like below the registration statement?
V_bom_header_tbl.assembly_item_name: is l_bom_header_tbl (i) .assembly_item_name;.
k: = 1;
I want to pass the l_bom_header_tbl (i) .assembly_item_name parameter in the declaration below: How do I do this?
for j from 1... l_bom_components_tbl. COUNTING LOOP
Can assign us a table type of type array as below the statement?
v_bom_components_tbl (k). Assembly_Item_name: is l_bom_header_tbl (i) .assembly_item_name;.
k: = k + 1;
end LOOP;
end loop;
end;
Published by: ILovePlSql on March 22, 2010 07:51
Published by: ILovePlSql on March 22, 2010 08:16ILovePlSql wrote:
V_bom_header_tbl emp % rowtype;If v_bom_header_tbl has just two fields as ename, sal then also the assignment of type table, record type work or if the record type and the array type have the same structure?
Yes:
SQL> declare 2 type Bom_Head_Rec_Type is record(ename emp.ename%type,sal emp.sal%type); 3 type BOM_HEADER_TBL_TYPE is table of Bom_Head_Rec_Type index by binary_integer; 4 l_bom_header_tbl BOM_HEADER_TBL_TYPE; 5 V_bom_header_tbl emp%rowtype; 6 begin 7 select ename,sal bulk collect into l_bom_header_tbl from emp; 8 for i in 1 .. l_bom_header_tbl.count loop 9 V_bom_header_tbl.ename := l_bom_header_tbl(i).ename; 10 V_bom_header_tbl.sal := l_bom_header_tbl(i).sal; 11 end loop; 12 end; 13 / PL/SQL procedure successfully completed. SQL>
SY.
-
How to display a message when the validation of several required fileds fails
Hello.
I use ColdFusion 9 and I have a question.
When we have a form with required fields coded like this:
< cfinput... required = "Yes" message = "Enter a value of 1" / >
< cfinput... required = "Yes" message = "Enter a value 2" / >
< cfinput... required = "Yes" message = "Enter a value of 3" / >
When the user sumbits the form Needless to say a warning window:
Enter a value of 1
Enter a value 2
Enter a value of 3
How do I do it so then only one message is issued as:
"Enter values for all required fields.
Not a single message for each required field.
Sorry for my imperfect English. Thank you.
I don't think that automatic, integrated to cfinput validation will allow you to do. You must create your own validation. Here's an example to help you get started:
function validate() {
// the values of the required fields
var a_val = document.getElementById("a_id").value;
var b_val = document.getElementById("b_id").value;
var c_val = document.getElementById("c_id").value;
// trim any leading and trailing spaces
a_val = a_val.replace(/^\s+|\s+$/g,'');
b_val = b_val.replace(/^\s+|\s+$/g,'');
c_val = c_val.replace(/^\s+|\s+$/g,'');
// validate
if(a_val=='' || b_val=='' || c_val=='') {
alert('You must enter values for the required fields a, b and c');
return false;
}
else
return true;
}
a:
b:
c:
It's just a basic validation script to illustrate the principle. You can of course do as sophisticated as you want, or even import specialized libraries of Javascript to do the posting for you.
-
In Windows 7, how to display window contents while dragging?
In Windows 7, how to display window contents while dragging?
It is correct. With so many required customizations, no two machines are identical :)
I give you another way for steps 1 and 2. I hope this helps.
- Press Windows Key + R.
- In the run window, type systempropertiesadvanced, and then click OK.
- In the performance section, click settings.
- In the box, check Show contents of window while dragging, and click OK.
Homepage: http://www.baxiabhishek.info | Blog of Windows 7: http://windows7blog.info
-
How to display the message no data found
My problem is that when my report generates no how to display a message "No Data found for search criteria" to data users? Here is an example of XML, when there is no data found.
Published by: tfa on May 1, 2009 10:30<?xml version="1.0" encoding="UTF-8"?> <DOCUMENT> <DATE>01-MAY-09</DATE> <USER_NAME>MYUSERNAME</USER_NAME> <APP_ID>750</APP_ID> <APP_NAME>APEX - Application Builder</APP_NAME> <TITLE>Averaging_Change_Letter</TITLE> <P7_MINIMUM_VARIANCE>0</P7_MINIMUM_VARIANCE> <P7_PROVIDER_ID>2033</P7_PROVIDER_ID> <P7_SIGNER>Someones Name</P7_SIGNER> <P7_SIGNER_PHONE>(801) 999-9999</P7_SIGNER_PHONE> <P7_CHANGE_DATE>11-JAN-09</P7_CHANGE_DATE> <P7_PAY_DATE>30-JAN-09</P7_PAY_DATE> <P7_PERIOD_NUMBER>3</P7_PERIOD_NUMBER> <REGION ID="0"> <ROWSET> <ROW> <PROVIDER_ID></PROVIDER_ID> <HR_EMPLOYEE_NUMBER></HR_EMPLOYEE_NUMBER> <PROVIDER_NAME></PROVIDER_NAME> <BIWEEKLY_PAY></BIWEEKLY_PAY> <CHANGE_DATE></CHANGE_DATE> <EFFECTIVE_TO_MONTH></EFFECTIVE_TO_MONTH> <LETTER_DATE></LETTER_DATE> <MONTH_FROM></MONTH_FROM> <MONTH_TO></MONTH_TO> <PERIOD_ABBREV></PERIOD_ABBREV> <PERIOD_FULL></PERIOD_FULL> <RVUS_IN_PERIOD></RVUS_IN_PERIOD> <DAYS_IN_PERIOD></DAYS_IN_PERIOD> <DAILY_RVU_PRODUCTION></DAILY_RVU_PRODUCTION> <RVU_PAY_RATE></RVU_PAY_RATE> <PROVIDER_EXPLANATION></PROVIDER_EXPLANATION> <PREV_PROVIDER_ID></PREV_PROVIDER_ID> <PREV_MONTH_FROM></PREV_MONTH_FROM> <PREV_MONTH_TO></PREV_MONTH_TO> <PREV_RVUS_IN_PERIOD></PREV_RVUS_IN_PERIOD> <PREV_DAYS_IN_PERIOD></PREV_DAYS_IN_PERIOD> <PREV_DAILY_RVU_PRODUCTION></PREV_DAILY_RVU_PRODUCTION> <PREV_RVU_PAY_RATE></PREV_RVU_PAY_RATE> <PREV_BIWEEKLY_PAY></PREV_BIWEEKLY_PAY> <PREV_PERIOD_ABBREV></PREV_PERIOD_ABBREV> <PREV_PERIOD_FULL></PREV_PERIOD_FULL> </ROW> </ROWSET> </REGION> </DOCUMENT>
I missed a POINT in front of! =, his. ! =
-
How do I access Amazon Prime for streaming with my Apple TV?
How do I access Amazon Prime for streaming with my Apple TV?
Amazon has not yet released a native application for the ATV. You will need to AirPlay since another device until the development is completed.
http://www.MacRumors.com/2015/11/28/Apple-TV-Amazon-Prime-video-TVos-app/
-
How to decompress the files downloaded for use with Windows 7?
How to decompress the files downloaded for use with Windows 7. Specifically, zip files are a Magellan GPS unit.
There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files
-
How to display the path of a contact with a program?
How to display the path of a contact with a program?
Hey,.
Follow the mentioned below as follows:
- Go to Contacts > Contacts.
- Highlight the contact to which you want to see the way through the program.
- Click on the newspaper story > program activity.
Thank you...
-
Hello
We have a requirement of click to call in installing 10.5 UCCX with customer website (user input) for our client, anyone who tested it in the laboratory/prod settings?
Thank you!!
MagaliHello magali.
It is possible to deploy with UCCX HTTP trigger type. To get the number of customer via the HTTP trigger to the script. Then we can place the outgoing number of customer to campaign or appeal directly to the customer and place this call to the QSC.
There are two scripts for web reminder in Cisco repository of scripts, see this http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/cont...
-
How to display warning messages in the OPS
Hi all
I have a page where in I have a poplist. When the user changes the value of that poplist I want to display a message window that the "the user must either save the modifications or changes will be ignored. And I want to have two buttons to save or cancel the changes.
How to achieve this in the OPS as I read that popups are not supported in the OPS.
And the Confirmation message boxes at the top of a page does not stop the users to perform further processing.
Can someone please shed some light on it.
Thanks in advance.Ginette
You can join firePartialAction with poplist and make use of the dialog page. For an example of a page of dialog with two buttons you can see the example of Toolbox page remove tutorial.
Thank you
AJ -
Hello. I enclose my Vi. I have a question about stopping a loop For I have 2 loops for the case "Test underway". I have a termial conditional that will stop my Vi but only after you have completed all the iterations of the loop For I have need of this Vi to stop immediately, when you press the stop button. I realize that it will take probably still finish an iteration, however, at the present time it waits until all iterations are performed, before coming to rest. I'm doing it with the same front button that stops the while loop. I tried a local variable, but to change a mechanical action and I prefer not to do, if this is possible. There was a lot of posts related to this topic here on the forum but I couldn't find the one suited to my needs. Thank you for your time.
Your While loop waiting loops to stop, so you can use local variables of your stop button to stop the for loops right now.
See you soon,.
Jimmy
-
How to display a message when users open the form
Hello
l want to display a message when a user opens a form.
The message will explain the shape and if the clik user NOT close the form
Thank you
Stone
You can use this script in the docReady event.
if (xfa.host.messageBox("A message goes here to explain the form","Title for the Message Box", 1, 2) != 4) event.target.closeDoc();
Just be careful, that I was unable to "test" it in LC, I had to save the file and open it in the drive to verify that it worked.
-
How to display a message after inserting line in the table...
Hello
I want to display a message after inserting rows in the table as *' you have inserted a new line with success *'.
I use the ADF button createinsert to insert the rows in table.after that I am stolen it.
After commit I want to display message for the user.for what I need to do.
Please help me.
Sanchez.
Double-click the validation button, to link Action property dialog will appear and then create a method of bean managed for the validation button.
Then, add the following code to the method:public String saveButton_action() {}
BindingContainer links = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
Object result = operationBinding.execute ();
Note "!" operator has been removed from the default code.
{if (OperationBinding.GetErrors (). IsEmpty())}
FacesContext ctx = FacesContext.getCurrentInstance ();
FacesMessage saveMsg is new FacesMessage ("saved successfully");.
ctx.addMessage (null, saveMsg);
}
Returns a null value.
}Then, restore the ActionListener value.
I hope this helps.
-
How to display a message on the second tab when an option is selected in a drop-down
Hello
I use a combo of my title bar, to within my application to display a list of options that will trigger different URL webViews.
On my first tab I have a Web of a page view and when the option is selected the webView will change and the second tab will load the same webView but with /deals at the end of the url.
The problem I have is that one of the options does not have a page of /deals on their site so I was wondering if it would be possible to hide the second tab or display a message on the second tab, when this specific option is selected?
Thanks in advance
If your problem is what method to use to hide the tabs or what...
You can use these functions... It will remove the tab but will not destroy the content, it's like hiding and showing a tab
REMOVE / HIDE
tabbedPane.remove (theTab);
ADD / VIEW
var index = 2; the tab index
tabbedPane.insert (index, theTab);
-
How to display an object mesh continually update with the Labview 3D photo object
I have a stream of update permanently of 3D images that can be represented in a mesh (a film in 3D if you want). I want to display in the 3D image object so that whenever I acquire a new 3D image that it is displayed. Examples are rare, and I couldn't find anything that dealt with this particular issue.
Currently (in a FOR/loop WHILE) for each iteration I create an object of the scene, set the geometry as an object mesh newly created, set the texture and it wire eventually to the 3D image. This implementation seems a memory leak (Task Manager shows permanently increases the used memory and processing speed will eventually drop). I guess that's because I recreate the object for each iteration. Problem is, I can't find something that would let me release/delete the object once I'm done with the framework. All the examples I found only deal with the creation of the 3D object once and manipulating.
What is the appropriate way to code this?
You just need to use the "narrow" VI on reference photo 3D like this code below. It runs inside the loop.
Now, if you're dealing with the mesh, then you should use the set the mesh to change the points inside the loop and then just close the reference after the code is done. Look at this code below. The trick is to recover the object using Typecast (to more specific reference VI) reference.
Also, look at examples of shipping to:
C:\nivs_dev\2013\InstallTo\ProgramFiles\National Instruments\LabVIEW\examples\picture\3D Picture Control
and especially the with Meshes.vi.
Maybe you are looking for
-
I can't post a reply to a reply to a reply.
Hi all, I tried to post a reply to an answer to my question: the Mac Pro has a future? I can't find how to do. I'm sorry, but according to me, this is a horrible interface. Now I can post this. What gives? melbournesteve
-
Hello I am owner of a m6-k025dx TS Sleekbook desire (product number: E0K45UA #ABA). Can someone walk me through how to perform a new installation of Windows 8.1 as all the drivers I need, or even if it can be done on this pc.
-
How to install a Codec I get this message when I try to add pictures
I downloaded the photos from my camera or facebook and I received the meesage to install a codec when I went on the site it says the link is broken help me please old age pensioner
-
power on password for hp pavillion g7 error code 62951015
I have a Hp pavillion g7 I gave to my niece, but she put a power on password on it to keep me and my sister the error code is 62951015 thanks
-
HP Notebook 15 15-r209ni: BIOS password
Hello Need to change boot to the DVD player and in need of BIOS password. Please can someone help