How to display PC on TV via a wireless connection

Similar Questions

• Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

  I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

  Any other suggestions?   Thank you

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for vista, win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• PhotoSmart 6510: How to select printing double sided via a mail connection?

  Hello

  I can choose and print double-sided if I send my file to the printer via a usb connection, but via a mail connection, I can not choose doubleside. Is this a known issue?

  Hello

  The HP ePrint feature do not support two-sided printing.

  You can find that she ranked by the documentation in the section service "are there any limitations that I should be aware of when using ePrint?":

  http://support.HP.com/us-en/document/c03721293

  Kind regards

  Shlomi

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• OfficeJet HP 8600 N911a stopped printing via a wireless connection

  There are about 3-4 weeks our 8600 Pro Officejet stopped printing via wireless connection.  I tried to uninstall and reinstall the software on the site of andf also the HP CD.  I ran the software help HP and everytime it tells me to reinstall the software.

  The printer appears on the Wi - Fi and install it correctly every time.  I can print diagnostic pages, status reports to the printer from my computer without isse.

  Pages of test and all other documents will be not print.  He says that the printer is offline.

  I live in the country and there is no wireless connection close to home that he is recovering.

  Nothing has changed from what I can tell.  the unit is out of warranty now and to get help from HP, I would have to pay $40 to get telephone assistance.

  Is there someone out there who can help?

  Thank you.

  Try the steps in this post to restart the spooler: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-photosmart-premium-c310-printer-Windows-7-operating/m-p/1118873/highlight/true#M83583

• How to display a message to the customer that connects?

  Hello

  I am fairly new FMS and really trying to learn about it. My question is simple, as I hope;

  I want a message to appear to a client when they connect that the maximum number of users has been reached. I have it set for 5 users and so I would like that when the 6th user tries to sign in to see the video, a small box will be pop up and say "sorry, Max users has been reached. Please try again in a few minutes. »

  I could develop something and get it through orders of the trace output by following a tutorial online, I saw, but I never got any sort of message box, that I built to jump to the top.

  Please help someone?

  Your code was not OK try this one.

  var ns:NetStream;

  var nc:NetConnection = new NetConnection();

  nc.addEventListener (NetStatusEvent.NET_STATUS, onNetStatus);

  NC. Connect ("rtmp://fms");

  function onNetStatus(event:NetStatusEvent):void {}

  trace (Event.info.code);

  Switch (event.info.code)

  {

  case "NetConnection.Connect.Success":

  NS = new NetStream (nc);
  ns.setBufferTime (2);

  myVideo.attachVideo (ns);

  NS. Play("MP4:BYN_e06_1.F4V");

  status_txt. Text = "you're: connected."

  where_txt. Text = "from:"+ Num; '.

  break;

  by default:

  status_txt. Text = "sorry, maximum users has been reached. Please try again. « ;

  break;

  }

  I suggest you to go through the documentation that comes with the FMS, there are many examples on how to create netconnection and netstream and then stream video. It will really help you.

  Kind regards

  Amit

• How to display the list of never installed or connected storage devices

  Original title: list of installed storage devices

  Is there a way to get the list of already installed or connected storage devices?
  I know that I can use USB and USBSTOR branches registry for these purposes. Is there something like that for CD/DVD, HARD disk drives?

  I guess the device driver installation and connection events are recorded somewhere, but I don't know where to find this information.

  Sorry for my English.

  Hello

  You can check the link provided below for more information on what information appears in Event Viewer in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  To the event viewer Windows XP Click on the link below.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx

• I can not scan with my Photosmart 6510 via a wireless connection.

  I recently bought a 6510 Photosmart all-in-one.  I can print without problem.  I could not scan.  I get the message: "unsuccessful Scan, an error occurred during the scan.  Please make sure that your computer is connected to the printer and try again. "I use Windows 7 64-bit.  The printer indicates that it is connected to my home network.  This printer has replaced another HP printer.  I have disabled my firewall but still the error message.  I ran the HP diagnostics for printers and networking with no precise answer.  You can provide any help would be appreciated.

  Hello 30million

  Error 1068 when you try to start a Windows Service indicates a problem with dependencies. The instructions below will explain how to locate dependencies and make sure they are enabled. Depending on your version of windows, you may need less listed dependencies. Let me know if you have other problems.

  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake.
   
  Check the dependencies or sous-dependances:
   
  Right-click WIA (Windows Image Acquisition) by selecting the first properties, and then click the Dependencies tab. It should list: remote procedure call and detection material core
   
  Under the CPP he then list Launcher process for the Service DCOM and RPC Endpoint Mapper to go back to the main list services.msc and then right click, will launch all the items listed as dependencies or void dependencies under WIA

• How to allow another computer to access my wireless connection

  I'm connectedo to router Wireless 'InfostradaWifi '. Please help to allow me to set up this computer to allow access wifi by any computer nearby. A nearby computer gives the message: "cannot connect to the hidden network"InfostradaWifi". Thanks in advance for your help.

  Isaac

  Hello

  Windows operating system you are using?

  Method 1:

  Configure the computer to start clean, temporarily disable the firewall and Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Wi - Fi and in Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.

• connect to the internet via a wireless connection

  I can't locate my internet connection through the network connection in Control Panel on my secondary computer.  I searched for the connection on my computer main & unable to locate?  How do I add my network & reconnect?

  Thxs
  Nicke

  Set up the connection again

• 1312 mfp: How can I make my mfp autonomous 1312 wireless connected to my home network

  I have mfp color laserjet 1312, I want to make it autonomous in the corner to connect to my home network, so we don't have to plug it into the usb every time the family wants to print their tablets of laptop or phone.

  All solutions?

  Hello

  The pritner does not provide wireless features.

  Only if you have the model of card/photo-fax you can connect to your network with an ethernet cable instead:

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3558902&docid=emr_na-c01466662&docLocale=en_US

  If you have the model of USB you can connect with a USB to one of your PC and share the pritner with your other computers.

  Shlomi

• Problem connecting to the network via a wireless connection

  Original title: why my knees is not connecting to the internet that she used to...?

  "My automatic connection to my net service simply does not work, when I put the appp problem solving through net wireless configuration, I can see it check adapter, services and ultimately he connects to the internet, but I didn't do it before, it was automatic, another affected is the lower display side right hand that appears when you click on the" internet access "icon". If do you it while he's looking my net service name, it seems empty that a connection broadband which I didn't use before I use the modem provided by INFINITUM... YOU HAVE AND IDEA WHAT UNDERWAY? At the moment I'm connected like I got the app work and conect problems problem but it says that there is the problem; "THE DIGNOSTICS GUIDELINES SERVICE DOES NOT WORK.

  Hello

  1 did you do changes on the computer before the show?

  2. who is the application that you are talking about?

  3. What is brand and model computer?

  Method 1: Update the wireless network drivers

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Reinstall the application

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3: Disable security software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a system restore

   

  See the site:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

• NB100 - new user. Unable to connect to the internet via a wireless connection

  * What can someone help please.*

  I bought a NB100 (Ubuntu) yesterday.
  He walks and he finds our Wi - Fi connection and got to the web. Large.

  I then ran "Update Manager" and since then I can not get internet connection.
  In 'Network settings' it shows only "Wired" & "Point to point" as the connection types.

  Also when I now click on 'Firefox Web Browser', 'Update Manager', 'Pilot' or 'Add Remove Programs' the equivalent circular hourglass appears for a few seconds, then disappears. The application does not start.

  Any guidance would be appreciated.
  Thank you.

  Post edited by: ikelsey

  That's exactly what happened here. See my post very recent inquiry about obtaining later to work. Which might be of interest, you can try the latest version to see what you think without having to install.

  With personal advice of an expert, we got the original Toshiba up-to-date and very well with the internet installation, but he still had "problems" with the sharing of files on my Windows network.

• Unable to connect to the network via a wireless connection.

  cannot connect to a wireless network adapter not connected

  can get Wi - Fi adapters

  Hello

  Do you have any software installed on your computer network monitoring?

  Monitor mode, or RFMON (Radio frequency monitor), allows a computer with a NIC (NIC) to monitor all traffic received from the wireless network. Unlike promiscuous mode, which is also used for packet sniffing, monitor mode allows packets to capture without having to associate with a network access point or ad - hoc first. Surveillance mode applies only to wireless networks, while "Promiscuous" mode can be used on cable networks and wireless. Surveillance mode is one of the six modes of 802.11 wireless cards can function in: Master (acting as an access point), Managed (client, also known as station), Ad - hoc mode, mesh, Repeater, and monitor.

  Limits

  Usually, the wireless adapter is unable to transmit in monitor mode and is limited to a single wireless channel, if it depends on the driver of the wireless card, its firmware and features of all of his chip. In addition, in monitor mode, the adapter does not check to see if the control of cyclic redundancy check (CRC) are correct for packets captured, then some captured packets is maybe damaged.

  If a network monitoring program is running on your computer, the wireless network adapter will be set to follow the fashion, which prevents Windows to connect to wireless networks.

  To connect to a wireless network, close the network monitoring program, or follow the instructions in the program to exit the monitor mode.

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Concerning
  Anthony