How to divide 3 signals which are produced by a data acquisition Wizard?

I've only been using LabVIEW for a few months without any type of training, so I don't know what's ridiculous or wrong. I checked the forum and LabVIEW help for something similar to what I want to accomplish, but I use the wrong words, questions or methods in general. No matter what help options or directions.

I expect 3 incoming signals that will be accessible by a DAQ Assistant. A signal is the complete signal, the other two are part of the complete signal. Partial signals each separately multiplied by the full signal. How to separate the signals that are in dynamic data produced by the wizard DAQ in a way that I can apply these processes?

Or, as I have already said, use the Signal from Split.

Tags: NI Software

Similar Questions

  • In Firefox, how can I create folders which are reducible?

    I use Firefox for years. In the past, the files I created were folding; now, they are not.

    Ah, now I see it, its not reducible not, its just all these bookmarks do not sit in the folder, on the contrary, they are now at the same level as the folder.

    Try this,

    1. Open the Bookmarks Manager, ctrl + shift + B
    2. Click on the menu "bookmark" on the left column to display all bookmarks in the sidebar right.
    3. Select the bookmark which supposed to be reduced, but anyway do not, for example, to clothing, try selecting all the way between 'andy fashion forum' and 'virtual clothes horse '. To make a multiple selection, click on 'andy fashion forum', then defiler scroll down, press and hold down the SHIFT key, click on 'virtual clothes horse '.
    4. with all the bookmark highlighted, click on, and then drag it to the icon of the folder for "CLOTHES".

    If this resolve your issue, do the same for all the others. Finally, you may want to edit your post to remove the image, the sound a little private and should not be displayed to everyone.

  • How to remove unwanted updates which are options without updating

    There are several optional updates (languages, etc.) I would like to delete.  How is that possible?  Using Windows 7 Ultimate. Thank you, crpet1

    HOW to hide an update or restore a hidden update (good for Win8/Win8.1, too!)
    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  • How to recover my apps which are lacking in the start screen and access?

    Original title: Apps

    IN the start screen several pre-installed applications are missing, for example maps, news, weather, etc. When I want to re install through the store, I get the message that they are already installed. How do retrieve my apps and access?

    Thanks for your help

    Buri Ram, Hi

    Thanks for posting your question in the Microsoft Community.

    I understand you want to know how to get Windows apps like Maps, Weather, News etc on Start menu are missing. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. did you uninstall applications?

    2. don't remove you applications on the start menu?

    Follow the steps below to get the missing apps in the start screen and check the issue:

    a. press the Symbol of Windows and type one of the missing apps Ex name: cards.

    b. you might see maps in the top left corner, right-click on it and click PIN to start from the bottom task bar.

    c. check the missing applications in the home screen to see the Maps application; Get all missing apps in the same way.

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

    In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

  • How can I add fonts, which are not in the Adobe Typekit?

    I want to add (for example TheSans) fonts in InDesign - but they are not in the Adobe Typekit.

    How can I add them?

    I tried to add them to my pc and tried to add them directly into the folder "fonts" in my adobe InDesign folder. But they are not yet available in InDesign.

    Help, please!

    Policies are managed by your operating system. Use the control panel of the system on Windows or the Fontbook on Mac utility.

    Mylenium

  • How to install a program which also shows up-to-date?

    I installed originally creative cloud and 3 programs to try.  I let the trial expire so I uninstalled ALL the programs.  Now, months later, I bought the creative cloud, but I don't have the ability to install programs I had on the trial.  They show as "up-to-date" but in fact, are not installed on my computer.  When I try to download directly from the site, it will immediately to the Manager of clouds, who watch programs just as up-to-date.  Don't know how to get around this problem.  Any suggestions?

    Hi cmf62,

    Please try the steps in the following article.

    http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.h tml

  • producer-consumer: optimize data acquisition rates

    I have a type of producer-consumer of application in which a single loop continuous waiting there and reads data from the card and another loop readings/backups of data. But besides a loop more trace data. The number of channels and real-time scanning is set by the user, the time it would take to save, view, and analyze each data block (an iteration of analog-to-digital reading) may vary according to different parameters.

    I'm putting 'number of samples to get' big enough on analog/digital playback to the beginning so I don't get the overflow of queue. Now I would like to adjust automatically when the program is running so I understand any overflow from the queue and at the same time the data are not exposed in the huge chunks at a time. Someone did he do this kind of thing before? For now, the only idea I have is to read the number of items in the queue at all times and use a mathematical formula to increase or decrease the number of samples.

    Abdel2,

    The number of items in the queue of streaming and using a mathematical formula to increase or decrease the number of samples is a good method. You can also use the decimate 1 D table function to display a smaller grouping your data if your problem is that you do not want to display huge chunks of data at the time.

  • How do I get the multi-function of labview for data acquisition on my toolbar function for lv2011? It is a reload of your laptop has crashed.

    I had to reload our installation of LV and have lv2011 and NOR-DAQMX 9.9.    I can't get the range of DAQ function to display the toolbar funtioon.   I tried to fix the OR-DAQMX driver.   It showed message "installation lv2012 support" and "facility charge SP1 lv2012".  I have not seen a message of support from lv2011.

    There was a problem downloading of configuration and 2012SP1 was wrong as my group of licenses for the account representative.  This has since been uninstalled before installing 2011 (without SP1).

    Thanks in advance,

    Bill

    Updated the installation of the driver NOR-DAQMx vs repair.    Apparently, he saw the LV2011 and installed support files.   Everything works now.

  • Split signals you are ordering

    I understand that you can use the module to SPLIT signals to divide multiple signals to a DAQ Assistant of multiple channels. My question is, what is the order of the split signals? If a DAQ Assistant has 4 signals which are then separated by then, the signal coming into the position the highest output is order 0 DAQ signals (and so forth: then above stopped 1... the lowest is of order 3)? If not, what is the command?

    ce_2015 wrote:

    If a DAQ Assistant has 4 signals which are then separated by then, the signal coming into the position the highest output is order 0 DAQ signals (and so forth: then above stopped 1... the lowest is of order 3)?

    Fix.  Regardless of the channel is the first in the list in the DAQ Assistant will be the first signal to divide and down the line.

  • I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?

    I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?

    When I wire any type of indicator, it is show that a release of a single channel.

    I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?

    I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.

    Thanks in advance.

    Yes you are right. I tried, but I don't have the result.

    I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.

    Thank you

  • When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work?

    When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work? The rest of the functions in this section seems to work. And I can get MY addons, but not the available modules.

    On the left side, click Extensions.

  • How can I find out what files on my drive D: (recovery) are those who are critical and which are not?

    I have a desktop computer with the Windows Vista operating system a1720n Pavilion. PC health tells me he is too little space left on my D: drive for optimal operation. He tells me to remove non-critical files; But how do I know what files are critical and which ones can I delete or move to the bigger drive C:. Or can I somehow expand the D: drive without messing things upwards? Norman

    Hi Norman,

    Please see the document on this subject at the link below.

    http://support.HP.com/us-en/document/c01508532

    Kind regards

    DP - K

  • How can I view or print my "about parameters" which are not truncated?

    How can I view or print my "about parameters" which are not truncated?

    Disable the large text. Settings > general > accessibility > great text > off

  • How do I password protect the document HTML library or individual files which are: IE: pictures etc?

    How do I password protect the document HTML library or individual files which are: IE: pictures etc?

    In Windows there is no password protection.

  • I was looking in my information system; software environment; system drivers and I noticed that many have stopped status. How can I determine which are to be started? How can I start them?

    I was looking in my information system; software environment; system drivers and I noticed that many have stopped status.  How can I determine which are to be started?  How can I start them?

    Hello

    · Do you see a problem with your computer?

    You can check the links which has more information on the information system: Description of Windows XP system information (Msinfo32.exe) tool: http://support.microsoft.com/kb/308549

Maybe you are looking for

  • Skype can't find a built-in Webcam

    Updated my Skype today, but now it does not find my webcam. I don't know how to solve this problem, it's urgent I need my camera to work for Skype: I didn't know you can return to the old version of Skype you just updated since then, but I don't know

  • Album art with WMP 12

    Hi - I'm new and really confused! Is it possible for someone to explain VERY SIMPLY how to get album art of WMP12 in "rocket"? She shows in WMP, but does not appear automatically when you synchronize on. A simple step by step guide would be great! Th

  • vista backup cannot save System Image on a network, when I can back up my files

    I have Vista Business and I can't save System Image on a network, when I can back up my files. Why? It is not the same on Windows seven, where he proposed to save it on the network. I can record image system by "WBADmin. What is the problem? Thank yo

  • Why have I not question marks on my folders in the navigation pane?

    Many of my folders have blue circles with a white question marks.  First of all, what does this mean? Second, how to fix?

  • Cannot reserve port 5060

    Hi guys! Try to set up static NAT to port 5060 and get an error "Unable to book port 5060" sip off inspection Cisco asa 5505