How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

Similar Questions

• How to divide the Source file into smaller files without export?

  Hi all

  I am a beginner with PPro CS4 and video editing in general. I did a lot of research on Google and the search of these forums for an answer to this question, but I have not found a clear answer. Here's my problem:

  I have many hours of HDV video in recent years with a Canon HV30. This sequence is on dozens of DV tape cassettes. I want to capture most of it on the disk.

  When I capture a band on the disc, I get a single large mpeg4 file. (Body captures all HDV films in mpeg4). "select Scene" does not work with the HV30, so my only way to make a small capture files would be set In/Out points with batch capture. But that would mean hours of fast forward and back with VCR type controls on the camera for the revision of all bands and points. I thought it might be more QUICK to capture everything simply a whole band at once, and THEN examine the band captured the Organization (he is much faster using the Purifier), and by dividing the file into smaller files within the Organization, thus avoiding mechanical advance and rewind on the camera itself.

  But the only way I can find for it seems to imply EXPORT clips. Am I wrong to think that the export of a clip to a new file involves a degradation of the original mpeg4 source file? Or there will be no loss of quality if I simply export to mpeg4 format?

  It seems that there should be an easy way to simply divide the initial capture in small source files for editing later, without putting the images through a new generation of (exporting) treatment, which could result in a loss of quality. Or I'm wrong about this?

  (CS4 Master Suite, i7 3630 k, 16 GB RAM, C: 256 GB SSD, 1 t D:, E: 1 t F3 setpoint setpoint F3)

  HDV film is mpeg2 (which is a number). CS4 is not scene detect you will need to use HDV split for this.

  http://strony.aster.pl/paviko/hdvsplit.htm.

  You can run your files already captured by hdv split and it will cut the file into clips and you leave.

• How to divide the source file without losing labels

  Hello

  I wonder how I could split my file source into two (or more) without losing the tags...

  Hello again, Wolfgang!

  OK, now I understand! However, I fear that there is no import in CVI mechanism, so that you can move the tags to another folder, other than doing this manually.

  However, it would be possible to realize a work around. Since you already have this information in your file of CFS (line Tags field), you can manually copy - paste on the line numbers the new file containing the source code you cut in half of the old file. A few steps:

  1. Either your source code file containing a.c source tags.
  2. Make a copy of a.c (e.g., British Colombia) and add b.c to the project.
  3. In your CFS file, copy - paste the field line Tags of a.c to the wire to the corresponding entry of the BC.
  4. Return to CVI, ensuring that the source code and the source of British Colombia tags are a perfect clone of a.c.
  5. Make the required changes to the a.c and b.c, such as the final result is the logical split of the original file. When you change a source file lines, source tags are also moved to the source editor.
  6. The end result is the code split between a.c and British Colombia, while keeping the corresponding position of the source tags.

  I am aware that there is work involved in the execution of these operations, but the result should be your result.

  I hope this helps, Wolfgang!

• How I've spread my video into several parts and save each file under different names?

  How I've spread my video into several parts and save each file under different names?

  You are going to need a video editing package to do this, you can not cut just to the top of the video into segments at the file level.

  With an editor, you can then crop the video into segments

• How to save the. File of ATN in Photoshop CS5 screen area

  How to save the. File of ATN in Photoshop CS5 screen area

  Hello

  Greetings!

  Open Photoshop.

  Open the Actions panel and select the action that you want to save to the desktop.

  Click the option panel (arrow pointing down with 4 rectangles)

  

  Choose Save Actions from the menu and choose the place like office and save.it

  Concerning

  Jitendra

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• How to divide the Dates

  Hi all...

  Here, I use the following scripts...

  create table a10 (eno number, date f, date t, number of sal)

  INSERT IN A10 (ENO, F, T, SAL) VALUES)

  1, TO_Date (1 July 2013 12:00:00 AM ',' DD/MM/YYYY HH: mi: SS AM'), TO_Date (June 30, 2014 12:00 ',' DD/MM/YYYY HH: mi: SS AM')

  (100);

  INSERT IN A10 (ENO, F, T, SAL) VALUES)

  1, TO_Date (May 1, 2013 12:00:00 AM ',' DD/MM/YYYY HH: mi: SS AM'), TO_Date (April 30, 2014 12:00 ',' DD/MM/YYYY HH: mi: SS AM')

  (200);

  COMMIT;

  entry:

  ENO      F             T                SAL

  07/01/2013 2014/06/30 100 1

  1 05/01/2013 30/04/2014 200

  Expected results:

  ENO F

  T

  SAL

  1 05/01/2013 2013/06/30 200

  1 30/04/2014 300 07/01/2013

  1 05/01/2014 2014/06/30 100

  I'm little bit confused how to divide the dates here... Any help is appreciated.

  Thank you all

  Stéphane

  Hello

  Always tell what version of Oracle you are using, especially if it's so old.

  In Oracle 10 (or 9, by the way) you can do this way:

  WITH cntr AS

  (

  SELECT LEVEL AS n

  OF the double

  CONNECT BY LEVEL<=>

  )

  got_change_date AS

  (

  SELECT d.eno

  C.n

  WHEN 1 THEN f

  ANOTHER t + 1

  END AS change_date

  C.n

  WHEN 1 THEN 1

  OF ANOTHER-1

  END as mul

  sal

  BY a10 d

  CROSS JOIN cntr c

  -WHERE... - If you need any filtering, put it here

  )

  got_total_sal AS

  (

  SELECT eno

  change_date f

  Advance (change_date) OVER (PARTITION BY eno

  ORDER BY change_date

  ) - 1 AS t

  SUM (sal * mul) over (PARTITION BY eno

  ORDER BY change_date

  ) AS total_sal

  OF got_change_date

  )

  SELECT *.

  OF got_total_sal

  WHERE t IS NOT NULL

  ORDER BY eno, f

  ;

• How to divide the column Date OBIEE

  Hello
  We have the name of the date column: To_Date and the format is DD/MM/YY hh.
  How to divide the date in YEARS, MONTHS, DAY as new columns.
  kindly help on that.
  
  
  Kind regards.
  CHR
  
  Published by: 867932 on November 23, 2011 22:18

  Hi user,

  All 3 functions can be written in RPD too. MDB layer, duplicate the date column-> the mapping tab to column of Goto-> expression-> functions Builder Select-> calendar Date functions / hour-> select DayofMOnth function. The column of your logic formula will look like,

  DayofMonth (YourDateColumn)

  Rgds,
  DpKa

• Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Yes, I assumed that was the case, and I thought that this link addressed to her.  I would have thought it was more a function of your network and the OS than Photoshop.

• How to shorten the music file to match the selected slides

  I created a slide show with windows vista movie maker.  How to shorten the music files to match both of the selected slides.  Using the fade out option did not work

  Hello

  You can try the following methods and check if it helps.

  Method 1:

  (a) open your filmmaking program and create the slide show using your photos. Choose the options you want for changes between the photos and the duration of each photo display. If you need help, then check out the help file in your theater program.

  (b) open the import file dialog box. In Windows Movie Maker, it is in the part of '"movie tasks', section"vidéo Capture." Browse your files to find the mp3 file you want to import, select and import it. Will import it into filmmaking program but it will not in the video.

  (c) search for the file in your filmmaking program and import it into the film. In Windows Movie Maker, you can drag and drop the file in the position in the window of time movie online, where you want that song to start playing.

  (d) scroll through the timeline until the end of the song. Drag the end of the song in a position to match the end of your slide show. This will be the end of the song at the same time exactly like your slide show.

  (e) read your film completely from the beginning to the end and ensure that everything is with the song the way you want that there. If you are satisfied with the finished product, then export the movie to the right format and the file will be ready to play.

  Method 2: Work with clips in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Reference:--

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker#

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• Two components don't PublishedStaticFiles on the same file, who wins?

  Hello
  
  I use UCM 11 G PS4.
  
  Anyone know how PublishedStaticFiles works, I know that publish
  resources in the weblayout/resources/wcm/custom.
  But did anyone know what happens if two components are trying to publish the same file?
  I will wait for that Content Server to merge the files into one published 2
  According to loadOrder.
  
  Can someone tell me what is the difference between PublishedStaticFiles and PublishedWeblayoutFiles?
  
  Kind regards
  CIPI

  I do not understand your problem. If you disable a component, its file (s) will NOT be published. It seems that you you copied all its content and/or you merge js files, so you don't need for the 2nd component more. Turn it off, and're you good to go.

• How to recompile the COBOL files?

  Hi all
  
  Can anyone provide some documentation to see how to recompile the COBOL files using Net Express 5.1 in the command prompt?
  
  Thanks in advance.
  
  Thank you and best regards,
  Siva Prasad B

  1. set up two environment variables, PS_HOME and COBROOT, on the computer where you are going to compile COBOL. (This should be your file server or a machine that has access to your file server.) You can do this from a DOS command prompt window.

  Set PS_HOME = C:\hr840
  Set COBROOT = c:\netexpress\base

  2. open a DOS commands prompt window, if you have not already, orders and access
  \Setup.

  3. run CBLBLD. BAT as follows
  cblbld
  where is the drive where the compilation takes place, is the temp
  Directory where the compilation is done

  The CBLBLD. BAT file will create the directory to compile for you, if it does not already exist.

  Novel make sure to include a space between the and parameters; they are treated as two different settings within the CBLBLD. Bat batch program. Also to ensure that you have permission write to and that the compilation process will take place there.

  For example, the following command will have the COBOL source of \src\cbl and the compilation process under c:\temp\compile:
  cblbld c: \temp\compile
  Take note of the information that appears on the screen during the process is running. It provides the location of important files that you need to consider.

• How to access the textedit files in Icloud on time machine

  Hi all

  Bad, I need your help! I'm trying to access all my text edit files, which I had saved on ICloud.
  My laptop does not run successfully. I was proposed to restore and re - install the op system. So I run a Machine back up full time and I restored my laptop. I should all have backed up, right?
  Problem is: I'm trying to get all my work on Tex Edit, but I can't find it on Time Machine. Does anyone know how can I recover these files? I have two important years of drafting work there!
  It would be good to have your suggestion.

  Thanks in advance for your help

  Did you you save the files in the correct format - OS X Server: how to modify the configuration files - Apple support?

• How to connect Apple TV to two different amplifiers?

  How to connect Apple TV to two different amplifiers?

  If you're talking about AppleTV 4 then there a single HDMI output only.

  You need either a HDMI switch or a divisor of direct HDMI to different amps (may not work at the same time due to HDCP) or see if an amp offers HDMI or optical output to the other depending on whether or not you want to distribute audio or video to the 2 amp.

  If you need a splitter/switch, it's an extra box and you might consider only 2 AppleTV, don't forget a rental on one will not be seen on the other.

• How to record the numbers and words in the same file

  Hello:

  I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."

  Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:

  Initial position X 1000

  final position X 2000

  space 100

  But idon't know how to save the words and numbers in the same file.

  As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)

  Thank you for your attention

  Hi bitxor.

  You can use all the functions of the WriteTotext file to write strings to a file.

  Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...

  BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!