How to download HP officejet pro 8500A 910 software when we cannot find the D drive?

Similar Questions

• The installation of XP Pro cannot find the hard drive

  The machine is running XP Pro 32-bit, and I am "upgrading" to 64-bit to work with AutoCAD.  When I boot on the 64-bit Setup installation CD can not find the hard drive and the demolitions.  The drive is already formatted to NTFS.

  You try to install on a SATA drive or your disks are on an add-in controller card and the Windows XP Installer x 64 doesn't have the required driver for the controller so it can't detect the drive.

  You have three options:

  1 - Use the F6 method to provide the installer for Windows XP x 64 mass storage drivers.  Drivers MUST be provided on a floppy disk, the Setup program will not accept the drivers from other media sources.

  2 - enter your CD of Windows XP x 64 drivers.  Note you will find reference to SP3 slipstreaming your Windows CD which you can install Windows on a SATA drive, but please note that Windows XP x 64 doesn't have a SP3, SP2 is the latest service pack for Windows XP x 64.

  3 (for the integrated SATA controllers) go into the BIOS and put the controller in IDE, most motherboard with SATA controllers mode on Board have an option to do this.  When mode IDE Windows XP Setup will see the drive and you will be able to install Windows.  Once Windows is installed, you will be able to install the SATA drivers from the installation of Windows XP operational.  You install the SATA drivers before changing the SATA mode controller in the BIOS, or when the Windows boot up upward a BSOD with a 0x7b error.

  John

• HP officejet pro 6830e: error message when I turn on the printer

  I just installed my new e 6830 and for some reason when I turn printer on site comes this error message on the display.

  There is a yellow triangle with the message "a paper tray is open close the drawer to continue" and told me to see loading paper instucions.

  Well although I closed syndicated paper closed back paper and closed, but this stupid message keeps coming up when I turn on printer any help until I take it to the store and a reinstall of my old printer.

  Paul.

  Hi @parkwood,

  Thank you for visiting the Forums from the HP Support! I see when you turn on your new HP Officejet Pro 6830 you get an error message "paper tray is open close the drawer to continue." I would like that perform you a Hard Reset:

  I recommend to remove the ink cartridges and perform a power reset:

  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Now you can go ahead and start printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  If please answer and let me know the result, because your printer is new, I suggest you contact our technical support at the 800-474-6836 that you would still be in warranty. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro U400 - remove password BIOS PSU41E, cannot find the rider

  Hello, I need urgent help, I'll try to find the jumper to reset my BIOS password, as I forgot, I've been on many sites but could not find a diagram of my Board of Directors - U400 INTEL motherboard A000029990

  Please can someone help.

  Serial number: 68061144W

  Thank you

  Chris

  Hello Chris

  You know very well that the BIOS password is characteristic of very important security so we cannot discuss about this in the public forum. At least, you can't wait can we discuss this topic on the forum of Toshiba.

  BIOS password is important for many laptop owners who want to protect their laptops and stored data. This explanation here can be abused and each laptop stolen with protection of the BIOS can be unlocked.

  Toshiba provider in your country can help you with this.

• Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

  Hello

  I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

  Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

  Any ideas people?

  Chris.

  Hello

  I m not a Linux expert, but I think that the reason is missing SATA drivers.
  Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
  If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
  But I put t know how it works on Linux

  An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

  Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

  Welcome them

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• HP officejet pro 8500 910 a guard cleaning print head

  HP officejet pro 8500 910 a constantly clean the print head after replacing cartridges inkt (original)

  This happens after each power off/on. I can't stop the process by opening the doors, etc. Could not understand what did the trick.

  The new cartridges are already half empty.

  I did all the configurations, calibration. All the test pages are superb and I still suffer from the issue.

  In this forum, someone (Dutch) had exactly the same problem.

  I hope that someone from HP is able give me some tips.

  Hello there @qtoigoo ,

  I understand that you are facing a problem with your Officejet 8500 continuously clean the print heads. Normally, this occurs if the print heads are going downhill. My best advice to you would be to try clean the contacts on the print heads manually and reset of the printer. Who can help.

  Here is a guide with the relevant instructions: print head issues

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

   

  I hope that my post was information!
  

   

  Have a wonderful day
  

• How to download Adobe Acrobat Pro Extended 9.0 Multilenguaje (Español)

  How to download Adobe Acrobat Pro Extended v9.4.1 Multilenguaje (Español)

  Hi Jean Claude,

  You can download it from this page:

  " Adobe - Acrobat 9 Pro Extended: for Windows

  Kind regards
  Maurice

  This answer was helpful? Please consider marking it as 'Useful' or 'Right answer' (as appropriate) to help future customers with the same problem. Thank you!

• How to download Adobe Acrobat Pro Extended v9.4.1 Multilenguaje (Español)

  How to download Adobe Acrobat Pro Extended 9.0 Multilenguaje (Español)

  Hi Enrique.

  You can download Acrobat 9 to:

  Download Adobe Creative Suite 6 applications

  Download Adobe Creative Suite 6 applications

  The 1st link is the .7z file and the 2nd link is the .exe file

  You need to download both and run the .exe file to start the installation.

  Make sure that both files are downloaded in the same folder.

  Kind regards

  Rave

• Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I cannot ope

  Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.

  Hi brets49833316,

  If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).

  In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service

  Thank you

  Abhishek

• Please - can someone tell me how to download Adobe Acrobat Pro for MAC? I already have the key.

  Please - can someone tell me how to download Adobe Acrobat Pro for MAC? I already have the key.

  How or where?  Download from https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• How to download Adobe Premiere Pro CS6 6.0 MLP AOO

  I the licensee and disabled the software but cannot find the installation file in my computer... How can I get the link to download pls?

  Hi Inss,

  You can follow the article: error: "Setup cannot initialize ' | Windows the same thing.

  Also, you can follow the discussion: Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem. where this issue is already addressed.

  Thank you

  Yann Arora

• OfficeJet Pro 8600: I got a new modem and the router. I uninstalled the HP software, but wizzard wireless configuration is locked.

  I uninstalled the software so I could start over.  Configuration Wizzard is locked and I can not understand how to get unlock.

  Hi @bobbalou,

  Thank you for visiting the Forums of HP Support for a solution to your printer problem.

  I understand that you replaced your modem and router, but could not connect your HP Officejet Pro 8600 e-all-in-one printer to the new network, because the wireless configuration wizard is locked. I would like to help with that.

  Try to restore the default network before attempting to run the Wireless Setup Wizard.

  1. on the touch screen of the printer, press the right arrow to display the second navigation screen.

  2. press on the installation program icon.

  3. tap network, then press the default network.

  If you are able to restore the default settings of the network is should allow you to run the Wireless Setup Wizard.

  If you're locked up because he had a password set in place on the printer, you will need the password to access the server (EWS) of embedded printer online web to change the settings of the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• LaserJet MFP M277dw Pro: How to find the TWAIN driver?

  The program that I use to scan works best with a TWAIN driver. Scanning HP doctor using it seems that both a WIA driver and TWAIN driver are available on my MFP M277 scanner, but the select option shows only the WIA. How can I find the TWAIN driver?

  Analysis of the issues...

  Please try this scanning solution:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know.