How to draw a table field

Similar Questions

• How to draw 2 tables on a graph?

  In fact, I'm trying to draw 2 tables the mathscript node .one depends on the other. I did a cluster for the 2 bays and led to plot in the chart, but the chart doesn't really show the exact values.

  I want to draw pde_sim which depends on the snrdb.

  

  the figure resulted that I get is:

  

  Is something wrong with my code?

  See duplicate:

  http://forums.NI.com/T5/LabVIEW-MathScript-RT-module/how-to-plot-2-arrays-on-a-graph-in-LabVIEW-Comm...

• How to draw 2 tables on a graph in labview communication design

  In fact, I'm trying to draw 2 tables the mathscript node .one depends on the other. I did a cluster for the 2 bays and led to plot in the chart, but the chart doesn't really show the exact values.

  I want to draw pde_sim which depends on the snrdb.

  

  the figure resulted that I get is:

  

  Is something wrong with my code?

  Hello

  You must use the Cluster to build instead of building Cluster Bay.

  

• How can I define table field residing in a Structure field?

  I use java Adobe XMP toolkit.

  There are a few methods to define elements of structure and table.

  setStructField() and appendArrayItem().

  But ducu said that the members of the Structure may be table or a structure, in addition also array elements can be tables or structures.

  So, how can I define field Array in Structure or table Structure?

  Thank you

  Andrey

  OK, it worked, first time (without exception) I tried to set the value of the CURRENT field.

  The trick is to add table or a struct before setting their values.

  This short example shows how this works:

  Register of XMPSchemaRegistry = XMPMetaFactory.getSchemaRegistry ();

  registry.registerNamespace (extNS, "pdfaExtension");

  registry.registerNamespace (shemaNS, "pdfaSchema");

  registry.registerNamespace (propertyNS, "pdfaProperty");

  XMPMeta m = XMPMetaFactory.create ();

  m.appendArrayItem (extNS, "pdfaExtension:schemas", new PropertyOptions () .setArray (true), "", new PropertyOptions () .setStruct (true));

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:prefix","dc" ');

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:namespaceURI","http://purl.org/dc/elements/1.1/" "");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:schema","Dublin Core Schema" ");

  m.appendArrayItem (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property", new PropertyOptions () .setArrayOrdered (true), null, new PropertyOptions() ")

  .setStruct (true));

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [1] / pdfaProperty:name","contributor", null ");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [1] / pdfaProperty:category","external", null ");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [1] / pdfaProperty:description", ")

  ("Contributors to the resource (other than the authors).", null);

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [1] / pdfaProperty:valueType","bag ProperName", null ");

  m.appendArrayItem (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property", new PropertyOptions () .setArrayOrdered (true), null, new PropertyOptions() ")

  .setStruct (true));

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [2] / pdfaProperty:name","coverage", null ");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [2] / pdfaProperty:category","external", null ");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [2] / pdfaProperty:description","the extent or scope of the resource.", null ");

  m.setProperty (extNS, "pdfaExtension:schemas [1] / pdfaSchema:property [2] / pdfaProperty:valueType","Text", null ");

  Code above creates more XMP:

  http://www.w3.org/1999/02/22-rdf-syntax-ns#">

  "xmlns:pdfaExtension ="http://www.aiim.org/pdfa/ns/extension/"

  "xmlns:pdfaSchema ="http://www.aiim.org/pdfa/ns/schema#"

  xmlns:pdfaProperty ="http://www.aiim.org/pdfa/ns/property#" >. "

  DC

  http://purl.org/DC/elements/1.1/

  Dublin Core Schema

  contributor

  external

  Contributors to the resource (other than the authors).

  bag ProperName

  coverage

  external

  The extent or scope of the resource.

  Text

• How to draw the table as a circle

  I have a problem.

  As an attachment, I send a picture and circle a table (20 items).

  Is anyone know how can I do the circle like this in Labview with this table?

  Blue dots represent the data in the table.

  Best regards

  Hi Sljuka,

  Lynn suggestions are good enough. Maybe the image control is an easy to use option. We won't know until you give us more details on the way in which you want the circle to look like - are the angles of table values or rays? Your photo of a circle, all points look all too distant, this isn't much information to build from.

  Tracing compass is another option. You can use this VI I attached as a starting point for a parcel of Compass style 2D.

  Please ask more specific questions and provide a code which you have worked on.

  Have a great day,

  Patricia

• How to index a table on multiple sites?

  Hello

  How to index a table on multiple sites?

  I searched this issue and was not able to find the answer. I understand that it can be done with loops, but I don't know how.

  I use the detector of crete vi for frequency domain data collected a VNA (s2p) file. The products contain a table of amplitudes and a table of locations. The problem is that the locations refer to the index of table of amplitude, which is not the same as the frequency. My idea is that I can use this output of the places table to index the frequency to the detected peak frequencies table and then draw these, as well as some analysis data and manipulation on them. Currently, I can do this only by consulting table on the front panel.

  The entrance to the peak detector is currently a table 1 d of the scale (what is the problem?).

  I also looked at the supply frequency & estimate VI, but this VI seems only exit of scalar data for the largest peak, not exactly what I'm looking for.

  Thanks for your help.

  You have a second table for the tested frequency?  If so, then you are right that you just need to index this table with the indexes by the Ridge detector.  Use a loop for.  Automatic index to the index, use index in array to get the value of the frequency and autoindex on frequencies.

  

• How to draw the average sensor values against an array of constant (long positions)?

  I have 7 microphones where I take the RMS value.  They are physically located in a line, and I would like to draw their values against their positions.  How can I think.  I guess I'll need to use the XY plot, but I don't know how to turn the 7 signals into a single table and how to create a table of constants for the positions.

  I think that I have, there are however a large number of conversions.  You see somehow I could simplify this, or is it as simple as I'm going to?  I have included my file to the post.

• How to draw the graph of output?

  Hello

  How to draw the graph of an exit? is there any api for it?

  The short answer is that there is no API, but you can create your own field if you want to, and here are some samples:

  http://supportforums.BlackBerry.com/T5/Java-development/create-graph-fields/Ta-p/444968

  I recommend the search before you ask questions to see if other people have asked similar questions.  If you type chart in the search box you will find other similar topics.

• XMLP: How to display row XML field in the same column

  Hello

  I show a particulare column in my group of LINE in a single cell of table RTF?

  Example of XML data:

  < L_LINE_GROUP >

  < G_LINES >

  < LINE_ID > 1 < / LINE_ID >

  < ELEMENT > POINT A1 < / ITEM >

  < / G_LINE >

  < G_LINES >

  < LINE_ID > 2 < / LINE_ID >

  A2 POINT < ITEM > < / ITEM >

  < / G_LINE >

  ...

  < / L_LINE_GROUP >

  I show the ITEM as a concatenated in a table field.

  as. QUESTION A1 POINT A2 A3...

  I tried..? for each: G_LINES? > <? G_LINES? > <? end foreach? > inside the cell, it prints inside the cell, but each element of the new line. I need to display as a concatenated string.

  Thanks for supporting me how in rtf.

  Thank you and best regards,

  Raja.

  The code of the cell can be

  This will ensure that the values are concatenated

• How could draw you a border around a rectangle in Flex?

  I need to know how to draw a border gray around a rectangle using MXML, without having to fill the rectangle with any color. I also need to know how to design the screen so that the components (in this case, I have a few fields of text entry, a button and a check box) appear in the rectangle. The rectangle should not take up the full width or height of the screen.

  Use of a group. Set the width and height to any size. Inside, the group uses a Rect with the width and height of 100%. Give him a stroke.

  Example:

  2

  2

  2

  2

  2

  2

  2

  2

  If this color value does not use 0xffffff

  If this color value does not use 0x000000

• How to draw a horizontal line

  Hello
  I have a region with 20 columns +, I want it divided into two sections and draw a horizontal line. I don't want to create another region. I have trired to add Stop 'and Start HTML table' but could not figure out how to draw the line.
  Can someone please advise?
  
  Thanks in advance
  Aali

  Hello

  you're right, create a new breakpoint and start HTML Table (label poster only)
  middle of your articles and seq number 30 means 30.1 like this
  and the label

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• By the numbers, how do the list tables on the side?

  By the numbers, how do the list tables on the side? It used to be on the side, now it is on the top which is a huge pain.

  This changed in the transition from Numbers2.x too 3.x.

  Unless you explicitly removed numbers 2.x, it is always installed and usable on your computer.  You can locate it in the folder "/ Applications/iWork ' 09.

  You should be aware, that numbers 2.x cannot open files saved numbers 3.x - you can export files from Numers3.x back to Numbers2.x by using the item of menu numbers 3.x "file > export to > number ' 09»

• Learn how to draw correctly

  You guys should learn how to draw your windows properly on the screen. There is a company called Microsoft which makes my operating system, the guys maybe you should contact them and get advice.

  

  I'm using the latest drivers from Microsoft. Can you ask them to fix the drivers? / s

• How to build a table inside a loop

  Hello world

  I have a fundamental question on labview. I would like to create a table in a loop 'for' in this way:

  inside the loop, if a condition named 'A' is true, then I add a new value to the first column of the table.  Otherwise, I have create a new column and start adding values in this column when the condition 'A' is checked, etc.

  I put an example of a VI when the 'A' condition is "improving the loop + 1 is not divisible by 5" and the values in the tables are to increase the loop + 1. The loop stops when the increment = 25.

  In this example, I have a single column with the values [1 2 3 4 6 7 8 9 11 12 13 14 16 17 18 19 21 22 23 24]

  while I wish I had a table of 5 columns:

  1 6 11 16 21

  2 7 12 17 22

  3 8 13 18 23

  4 9 14 19 24

  Note that this is just an example. More generally, the table may contain columns of different lengths.

  Thanks for your response

  Andrew

  Try to watch this VI I wrote, it takes a 1 d array and puts it into a 2D array based on a threshold. I think it's a pretty good example on how to insert a table of works. I hope it helps