How to enable print double-sided on 6520 photosmart all-in-one
How to enable duplex printing on 6520 photosmart all in one running on windows 7
The Photosmart 6520 support automatic duplex printing.
You can follow the penlow stes to set duplex printing:
Tags: HP Printers
Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6. I have to press OK on the screen of the printer to empty before printing again. Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done. Help, please! Thank you!
The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.
Bob_Headricks steps to physically clean the printhead:
On my laptop that is running Windows 7, there is a checkbox to print double-sided. My new printer (old we died in some of the excessive rains induced sewer failure) duplex automatically, so I like to use this feature whenever possible. However, when I try to print on my new computer under Windows 8 (old computer met the same fate as the printer), there is no place I can find to influence the dialog box offer me duplex printing. Help, please.
Are your Windows 7 and 64-bit systems of Windows 8? There are often differences between 64-bit and 32-bit device drivers. In addition, brother says that it offers its own pilots in addition to those included with Windows 8.
The following may be useful:
- Brother Windows 8 support page: http://welcome.solutions.brother.com/bsc/public_s/id/os/windows.html
- Downloads of drivers and firmware HL-2270DW: http://welcome.solutions.brother.com/bsc/public/midlink3.aspx?prod=hl2270dw_all & lang = all & src = DOWNLOAD
I can choose and print double-sided if I send my file to the printer via a usb connection, but via a mail connection, I can not choose doubleside. Is this a known issue?
The HP ePrint feature do not support two-sided printing.
You can find that she ranked by the documentation in the section service "are there any limitations that I should be aware of when using ePrint?":
I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)
Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.
That is what it is? How can I fix?
I can help you with the printing settings in Open Office.
It seems that this program has its own options that can bypass the default print settings.
I found this page of support which may help you with the settings. OpenOffice - control print
The printer works fine but the scanner does not appear to be connected.
the above link has information on your printer model HP psc 2410 Photosmart
not to mention that other information to download from the link above and read the manual for it" HowImprove your performance of product´s with details on how to use and maintain.Having a problem with your product? Find your solution here' ManualsDownload your product documentation and user guides
Photosmart 6520 will not print my card envelopes. They are 5 3/4 x 3/8/4. You another is4 size 3/8 x 5 3/4. When I print the larger size, I got the messsage that book does not match even if I properly checked envelope format. I spoke with HP support five different times to fix this problem. I finally learned today by technology there is no custom size available for this envelope. Does anyone have suggestions for this problem. I do a lot of graphics on my envelopes for homebound and need it works.
Did not work. I get a new printer HP Officejet Pro 8600 Plus e all in one printer. Thanks for trying to help.
I had issues when I was with Win7-64 bit, but now its even worse since the installation of Win10-64 bit. I have to open the Setup Wizard to go through the routine of checking on the printer to test the scan to get the scanner to work. Works very well this way, but such a long way around to just scan of a photo. Is there something I can do to fix this?
Have no problem with the impression that he is still printing the 1st page to last although I programmed it to print last page 1 on the 1st last page. Minor problem. that I can live.
Welcome to the community of HP @Snooze2978,
I saw your post on the scanning problems you encounter on Windows 10, and I hope to help you! Let me know a little more on the questions by answering and completing the steps below and then answer for me with the information and we can go from there!
- How the printer is connected (USB / wireless / wired / Bluetooth)?
- You can successfully make copies of the front of the unit?
- Have you tried the front of the printer and the scanner software?
- Do you receive error messages when you try to scan and if so, what they say?
- Have you tried uninstalling and reinstalling the software?
- What firewalls and antivirus software are installed?
- Have you tried to disable or uninstall the?
- You have the device connected directly to a wall outlet (avoiding electrical surge bars, etc.)?
Also I would like to know how you install the software, disks, download them, or running it HP printer install wizard for Windows.
Whenever I have print anything, it ejects always an extra white page later. He did until I went Windows 8.1, and she always does since I've upgraded to Windows 10. Is it a setting I can adjust or malfunction? Thank you for your time and your help.
Welcome to the Forums of HP Support!
I understand that you are having problems with your printer HP Photosmart 6520, printing a blank sheet of paper extra printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I see that you had this problem in Windows 8.1, before the upgrade to Windows 10. It is usually the result of a software conflict or a damaged printer driver.
To correct this problem try the steps in this guide: HP printers - year Extra Virgin Page print (Windows).
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
I have a HP all-in-one printer 7180 as ist almost five years. It has served me well. Using a PC, I liked print prints front and black/white, saving paper and colorink.
My daughter bought a MacBook Pro with Leopard OS last year. We failed to find out how it can print double-sided and with only black ink. The parameters of this seems to be missing.
Recently, we bought two more MacBook Pro in our family. The two OS Lion rund. I managed to print from them, but not duplex and not using only black ink.
Is it possible, and can someone please tell me how?
Best regards, Bjoer
Hi again Bjoern
After checking, just to correct the duplex option will be available in the menu layout unter.
Simply click Copies & Pages and page layout
There, you will see the duplex option.
How can I activate the scanner on my HP photosmart all-in - one printer?
How can I activate the scanner on my Photosmart all-in-one printer?
How can I activate print double-sided on my Canon MG6350 printer
I go to the website of canons and get their driver and check their software if the printer is supported and he supported printing double-sided on OS X, it would have parameters in their software in system preferences
I can always print duplex from my ipad but not my computer? How to set my computer to always print double-sided on my Mac?
Maybe you can try this:
1. make sure you have installed the driver software for your printer
2 open Terminal--> / Application/Others/Terminal
3. Type "cupsctl WebInterface = yes" and then press enter
4. launch the browser web and learned to "631".
5 click ' tab 'Administration '.
6. click on the button "Manage printers" under printers
7. Select your printer (no fax)
8. click on the 'Administration' dropdown and select "define the default Options.
9. click on "double-sided printing.
10. in the drop down box select double-sided, "binding side long or binding short side", depends on your preference
11. click on the button 'set the default Options '.
12. Enter credintials and you're ready to go.
Please try it and let me know if it works. Hope this helps
No there's nothing wrong I. Just need to know how to print double-sided on my printer HP Deskjet 3520 All In One
Welcome to the Forums of HP Support!
The two-sided printing with your Deskjet 3520, you must do it manually. I've included the User Guide for your printer, and the steps for manual duplex printing are on page 45.
Please let me know if you have any other questions.
I hope this helps!
I am a first place writer and my guardian forces me to use the A5 format. I was assured only the HP Jet Pro and a brother could printing double-sided a 5.I havetried printing without result. I ealize I beyond the use of date for modern technology, but I'd be very happy ay advice on A; is it possible on this printer? B:how is it achievable? Best regards, Warrigal.
Just the printer does not support this. Please check the specifications following, listed under handaling paper > paper sizes supported:
(No "tick" under pass duplexer).
Maybe you are looking for
My camera is iPodtouch which I want to activate. To be able to do the device asked me to enter the previous password, which has since been disabled for security reasons. To reset it forces me to do so either by e-mail or on security issues. I do not
I'm a new 7640 attached to a 2013 end Yosemite running iMac. My wife works from home and I would not have the ringtone on the sound off printer when a call comes in. Is it possible to turn off the ringer, as you can do on a phone?
My two younger brothers are physically disabled and use to tell them what they are on the Narrator. Have just updated graphics cards for them (I know, don't ask) comes from all the sounds through the speakers set up outside the Narrator; that comes t
My friend bought a computer from a pawn shop. I'm trying to help her set up. It takes old user by default the account name and the password. We do not know the password. We cannot access the Start button. The only thing that appears is the user name,