How to enable the function keys beats again after the upgrade of the OS?
How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000
Stealth,
The combination of bat function keys is
FN + b
as stated in your Quick Start Guide
Chapter 1, Page 2
The Guide:
Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
Crystal clear sound. Beats Audio is enabled by default.
▲ To enable or disable the Beats Audio, press fn + b.
Select Start > Control Panel > hardware and sound > Beats Audio
---------------------------------------------------------------------------------------------------------------------------------------------------
If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.
There are actually two different models in the category of 210-4000 Mini.
Start here to the Support and drivers
- Select the model entry that corresponds to your laptop.
- Go to Software and Driver Downloads
- Select your operating system (Windows 7, 32-bit), and then click "Next".
- Scroll down
- The Audio driver is the first category...
- Download the package, pay attention to where it is saved.
Given that you just upgraded (probably from Vista?), you may need to update some other software too. Go through the different categories and see if you need / want any of the other packages. Most of them can be added 'above' of what you already have on the system. If you must delete something, the program will inform you when you try to install the new version.
- If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.
For Audio driver... After you update / install the driver, reboot your computer. After that, you should have your software Beats back. If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...
Good luck!
----------------------------------------------------------------------------------------------------------
Click on the star of white Kudos on the left to give Kudos for assistance.
Please click "accept as Solution" to say the problem is solved.
Always include: (Computer) product number , printer - model number ,.
Never give your serial number
----------------------------------------------------------------------------------------------------------------
2012 the year of the Dragon!
Tags: Notebooks
Similar Questions
-
Satellite L500 - how to enable the WLAN?
I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
I used to market its WIFI by pressing the FN + F8 keys.
But now I can't on it using the method.
I downloaded its end drivers.
In reality its all the function keys do not work.
Please let me know how to enable the WLAN and function keys.Hi kim2kjy,
You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?
The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.
Check this box!
-
I use Windows XP Home Edition and I am fully up to date with the latest version of the software.
I would like to activate my mouse USB power out "sleep mode" on my computer. I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse
However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USBAny help would be greatly appreciated!
This gives a test:
1. click on START
2. click on 'run '.
3 type "notepad" (without the quotes) and press enter
4. copy and paste this into Notepad:Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
"USBBIOSHACKS" = DWORD: 00000000
"USBBIOSx" = DWORD: 000000005. click on file > save as
6. change the dropdown to "all files".
7 type usb.reg as the file name and save the file somewhere easy to access
8 go find the file and double click it. Confirm that you want to add it to the registry
9 restart the computer and see if you can wake the system from standby modeFor reference, take a look at this:
http://www.dslreports.com/Forum/r19635912-missing-power-management-tabLet us know,
Thank you!
Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to enable the automatic configuration service in Windows XP
How to enable the automatic configuration service in Windows XP
Hi SamuelOkon,
Are you facing any problem on your computer?
You can follow the steps in this link & check if it helps.
How to activate the Wireless Auto Configuration startup type?
Hope the helps of information.
Please post back and we do know. -
How to enable the ReadyBoost feature?
I would like to know how to enable the ReadyBoost feature.
Does anyone have any suggestions?
Thanks in advance for your suggestionsI would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not. I tried ReadyBoost option in SSD drive is not available.
Do you have any suggestions?
Thanks a lot for your suggestions :>Hello
Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.
This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.
More information on the following links.
Understand the ReadyBoost and the question of whether it will Speed Up your system
http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspxTurn ReadyBoost on or off a storage device:
http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-deviceConcerning
-
How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.
I am running Windows 7 Ultimate edition with service pack 1.
I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.
Now, it does not. Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.
Any help would be appreciated.
MasterJay1
Click Start, click Help, and then type this phrase in the search box:
enable remote desktop
Article 5 will have explicit instructions for the task.
-
How to enable the CDI an area of weblogic (not IntegratedWeblogicService)
I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.
How to enable the CDI in a weblogic domain base?
Thank you very much.
CDI is not an option available on Weblogic server or a configurable parameter.
It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.
Try it below to solve the problem
Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.
You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.
Registered the application libraries is also written in the config.xml file, which can also be used to compare.
It could be useful!
Thank you
Vijaya
-
How to enable the TOC in cp Bill?
I am a new user to Captivate.
How to enable the TOC in cp Bill? Please suggest
Go to option menu project-> Table of Contents-> select Show TOC.
Table of contents will be activated.
-
How to enable the Welcome screen in photoshop cc?
With photoshop the new se update. The home screen has disappeared and I wanted it back. I found it very useful with some of my drawings. How to enable the Welcome screen?
And just to clarify: Welcome screen has been replaced by the workspace of departure, completed by the advice that the Welcome screen was (although I admit that's exactly as good).
-
How to enable password protection in windows xp after disableing it
How to enable password protection in windows xp after disableing it I disabled it and now I don't have to reverse the trend.
Hello
· What password are you referring, passwords, or any other application?
If you're referring to passwords, then follow the steps mentioned below.
a. Click Start, and click Control Panel.
b. click on user account and click on your username.
c. click password to create and then create a new password.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Qosmio G20 - how to enable the function keys
Can someone tell me how to activate the function keys? I seem to be entirely invalid.
Thank you
MikeHello
In my opinion one of the important gift of drivers or utilities work and, therefore, you cannot use the FN keys.
If your have installed XP on your test of the G20 to refresh the Toshiba common Modules.
It is an essential tool that controls the FN keys.The common Modules can be downloaded from the page of European driver of Toshiba.
Check it out.
-
Equium A110-252: how to enable the wireless function?
Hi, first time ive been on this forum. I recently bought the toshiba satellite (think that's the spelling) and a wireless router. now, the router works well with my other computer, is very fast, but I can't go online with the laptop. all the info I get, is that the wireless is not activated? its got beat me, so I hope someone out there can help me to solve the problem, so I can start using my laptop in the room. Thanks in advance. Susi
Hello Susi
The first use of WLAN switch and move it to THE post. The WLAN control light should be on. After this check in If Device Manager card is correctly registered.
The last step is to use the FN + F8 key combination to activate and enable the wireless network adapter. When activated the WLAN connection must be configured correctly. I assume that your camera comes with WLAN client utility. If you use this utility to configure the WIFI connection, please ensure that this WLAN Windows option is disabled.
-
Satellite P750 - 02K - how to enable the wireless interface?
Hello
I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?
I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.
Any suggestions? Thank you.
Hey Buddy,
I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?
On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.
Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.
-
How to enable the AHCI for SSD on M6-1010TX laptop computer HP
HELO
Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.
The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.
Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.
There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)
I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.
I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.
Anyone know if these later versions of Intel are safe to install?
PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.
A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?
Thank you
OK Hüffer---> we have a update
I had the opportunity to re - install the SSD drive this morning.
It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.
When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.
EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).
2. it does not recognize the SATA 3 Interface
HOWEVER - it seems to work quite fantasmagorically FAAAAAAST
Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes
These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.
I am now very happy with this performance (but I wish that AHCI warnings were not there)
So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.
Thank you once again to Hüffer,
Hawkeye
-
How to enable the AHCI in HP pavilion dv6700t?
Hello
I was wondering if it was possible to enable the AHCI on my pavilion dv6700t. Chipset intel is a much older model, P965 of 2008 but still works fine.
In Manager devices, under IDE ATA/ATAPI controllers, he says that the ich8m-e/m sata AHCI is enabled. It is reasonable to assume that AHCI is therefore already activated? I have no way to do it via the BIOS, which limited configuration options. It's the PhoenixBIOS l58.
I am considering installing a SSD as my boot (and only) and I read that the AHCI is important for functions such as the NCQ, etc..
Thanks for your wisdom!
Jason
Hi, Jason:
Yes, that's correct.
AHCI is enabled by default.
This is why everyone struggled to install XP on laptops. AHCI drivers must be loaded before installing XP at the prompt F6 or slipstreamed into a copy of the XP Setup disk.
Now... you can do whatever you want, but I don't know of anyone on this forum who has installed an SSD in any model dv6000/dv9000 Series notebook.
If you know it's possible, thanks for posting back after installing a SSD and let us know how you did.
Paul
Maybe you are looking for
-
HP all-in-one-24-g085na: Virus has wiped out the computer
Unfortunately downloaded a virus and all partitions on the drive hard lost, y at - it a recovery disk which can buy to reinstall the bulkheads, OS and software drivers.
-
I can't get my radio to power wireless
T500-Win7 - 4 GB mem. Bluetooth radio will continue to feed on, but Wireless will not. I have access connections ver.5.83 Have tried lucky w/no diagnosis. All seems well in dev. Mgr. Adapter says Intel WiFi Link 5100 AGN driver version 13.5.0.6 Mater
-
Download booted from the games online for high ping rates
Original title: high ping rate When you try to play online multiplayer games in Windows 7, I keep getting starts to have a medium too high ping. Is it possible to accelerate only? I have done speed tests and am running at speed more than enough for a
-
"Number Lock" issue in Virtual PC 2007
Hi, I have a problem with Virtual PC 2007, what happens is that the 'NumLock' key is automatically activated whenever I have start a Virtual Machine - and it cannot be disabled, it's incredibly annoying and I already tried things like pressing the SH
-
Hello I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server. I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and othe